# a density of 1.0 M solution of NaCL

29,400 results, page 79

### chem

1.Can a solution ever have a pH=0? 2.What does pH = 0 suggest about the concentration of the acid? 3.Can the pH ever be negative? 4.What is the significance of a negative pH in a solution? pls need help we didn't cover this in lecture yet.

### Chemistry

If the molality of a CaCl2 solution is .100 mol/kg, and was made from 500.0 mL of water, how many grams of CaCl2 were needed to make the solution? Step by step would be appreciated!

### chem

How many grams of NH4Cl must be added to 0.560 L of 1.90 M NH3 solution to yield a buffer solution with a pH of 8.50? Assume no volume change. Kb for NH3 = 1.8 10-5. i am confused as how to find the grams?

### Math

Find the exact solution, using common logarithms, and a two-decimal-place approximation of each solution. log(7x + 4) = 2 + log(2x − 3) Solve the equation. log(x^3) = (log x)^2

### Chemistry

A solution is made by dissolving 0.624 mol of nonelectrolyte solute in 795 g of benzene. Calculate the freezing point and boiling point of the solution. Tf=_ˆC Tb=_ˆC

### chemistry

Why were we instructed to add distilled water to a metal nitrate solution? What purpose does the water serve in the experiment? Just to add volume so the probe can reach the solution?

### Chemistry

A 23.16 ml volume of an H2A acid solution of unknown concentration with 2 drops of phenolphthalein required 14.24 ml of 0.135 M NaOH to reach the endpoint. What is the molar concentration of the acid solution?

### Chemistry

Determine the sulfate ion concentration in a solution prepared by diluting 15.00mL of a 0.200M aluminum sulfate solution with 35.00mL of water. Assume the volumes are additive.

### Chemistry

How much potassium chloride in grams is needed to prepare 1500ml solution of 3% kcl solution? This is my answer: 3x1500=4500 4500÷100=45 Answer is 45gm

### Chemistry

Write an equation to represent the oxidation of I- to I2 in acidic solution, with ozone as the oxidizing agent. I know ozone will be reduced to H2O, but I am not sure how to figure out the acidic solution. Thank you!

### Chemistry

A jar contains 75mL of a .45M silver nitrate solution. Will 200g of solid copper be enough to bring all the silver out of solution as a solid?

### chemistry

an old tablet of vitamin c weighed 1.022 g. It was dissolved in 500 mL water, and a 25.0 mL aliquot of this solution required 22.6 mL of .005 M I2 solution to oxidize it. Calculate the mg vitamin C in the tablet.

### Food Chemistry

A new food colorant has a molar absorptivity of 3.8x 10^3 cm^-1M^-1 at 510 nm: (1) what will be the absorbance of a 2X10^-4 M solution in a 1 cm cuvette determined at 510 nm; (2) what will be the percent transmittance (T%) of the solution in (1) in this case

### biochemistry

You have 325 mL of an 0.11 M acetic acid solution. What volume (V) of 2.00 M NaOH solution must you add in order to prepare an acetate buffer of pH = 5.07? (The pKa of acetic acid is 4.76.)

### CHEMISTRY !!! HELP !

You have 875 mL of an 0.53 M acetic acid solution. What volume (V) of 1.30 M NaOH solution must you add in order to prepare an acetate buffer of pH = 4.94? (The pKa of acetic acid is 4.76.)

### CHEMISTRY

You have 875 mL of an 0.53 M acetic acid solution. What volume (V) of 1.30 M NaOH solution must you add in order to prepare an acetate buffer of pH = 4.94? (The pKa of acetic acid is 4.76.)

### Analytical Chemistry

I have a 0.00156 M solution of CuSO4*5H2O in water (from 0.0398 g of CuSO4*5H20 in 100 mL of water). How would I calculate the ppm of Cu of that solution from that information?

### Chemisty

You have 775 mL of an 0.11 M acetic acid solution. What volume (V) of 1.10 M NaOH solution must you add in order to prepare an acetate buffer of pH = 5.05? (The pKa of acetic acid is 4.76.) I don't know what to do!!! HELP!!!!

### Chemistry

You prepare a buffer solution by dissolving 2.00 g each of benzoic acid, C6H5COOH and sodium benzoate, NaC6H5COO in 750.0 mL of water. What is the pH of this buffer? Assume that the solution's volume is 750.0 mL.

### chemistry

75.0 mL of a 1.50 M solution is diluted to a total volume of 278 mL. A 139-mL portion of that solution is diluted by adding 139 mL of water. What is the final concentration? Assume the volumes are additive.

### Algebra

A chemical manufacturer wishes to fill an order for 700 gallons of a 24% acid solution. Solutions of 20% and 30% are in stock. How many gallons of 20% acid solution will be used in the desired mixture?

### Algebra 1

Which cannot describe a system of linear equations? a) no solution b) exactly two solutions c) infinite solutions**** d) exactly one solution To be honest I think the answer is C. Please Help!

### math help :)

the lab keeps two acid solutions on hand. one is 20% and the other is 35%. how much 20% and how much 35% acid solution should be used to prepare 25 liters of a 26% solution?

### Chemistry

You wish to prepare 0.18 M HNO3 from a stock solution of nitric acid that is 18.9 M. How many milliliters of the stock solution do you require to make up 1.00 L of 0.18 M HNO3? Answer and..... HOW DO I DO IT?

### Algebra 2

How many liters of water must be added to 8 liters of a 40% acid solution to obtain a 10% acid solution? Please Show All Work!

### chemistry, organic chemistry

How do we calculate the temperature of a mixture of hexane and heptane at which the mixture solution equals 1atm?This will be the boiling point of the solution

### MATH

Pewee adds two liters of pure alcohol to a 30% solution of alcohol in water. If the new concentration is 40%, how many liters of the original solution were there?

### Chemistry

Calculate ΔG at 298 K for the electrochemical cell consisting of Au metal in a 0.00500 M Au(NO3)3 solution and Cu metal in a 0.950 M Cu(NO3)2 solution.

### algebra

If a system has an infinite number of solutions, use set-builder notation to write the solution set. If a system has no solution, state this. m - 2n = 16, 4m + 4 = 1

### chemistry

you must prepare 300 mL of .750M NaBr solution using 2M NaBr stock solustion. how many mL of stock solution should you use?

### chemistry

The osmotic pressure of a solution containing 5.00 mg of an unknown protein per 10 mL of solution was 2.73 torr at 25 °C. Find the molar mass of the unknown protein.

### Chemistry

A solution of HCL whose pH=2.010 was added to neautralize a 40.00 ml solution of KOH, the molarity of KOH is .2567 M. How many mls of HCl were required?

### chemistry

Benzoic Acid (HC6H5OO, 122.0 g/mol) has a Ka = 6.3 x 10-5. What is the pH of a solution that has 3.050 g of benzoic acid in enough water to make a 0.250 L solution?

### Chemistry

Suppose that 50.0mL of 0.240M sulfric acid requires 36.0mL of KOH solution to reach its endpoint. What is the molarity of the KOH solution?

### Geometry

ABCD is a parallelogram with angle B= 120, angle C= 60, angle D= 2x+5y, and angle A= 4x+y. Find the values of x and y. Check your solution, only an algebraic solution will be accepted.

### chemistry

a 35.5 mL sample of an NaOH solution is needed to titrate a 2.08 g sample of pure benzoic acid (HC7H5O2)a solid. What is the molarity of the NaOH solution?

### chemistry

If 35.7{\rm mL} of 0.205{\rm M} {\rm KOH} is required to completely neutralize 20.0{\rm mL} of a {\rm HC_2H_3O_2} solution, what is the molarity of the acetic acid solution? {\rm HC_2H_3O_2}(aq) + {\rm KOH}(aq) \to {\rm KC_2H_3O_2}(aq) + {\rm H}_{2}{\rm O}(l)

### Math

If the pH of a solution increases by 4 (from 4 to 8), how much does the hydrogen ion concentration change? Does the change make the solution more acidic or more basic?

### chemistry

calculate the number of milliliters of 0.10 M cupric sulfate solution that must be diluted to prepare 10mL of a 0.015M cupric sulfate solution.

### AP Chemistry

A solution of AgI contains 1.2 mol/L Ag+. Ksp of AgI is 8.3×10^17. What is the maximum I− concentration that can exist in this solution? Answer in units of mol/L

### ap chemistry

A buffer solution is made by dissolving 0.45 moles of a weak acid (HA) and 0.23 moles of KOH into 680 mL of solution. What is the pH of this buffer? Ka = 2.4×10−6 for HA.

### chemistry

Based on your titration of the 150ppm standard solution of Ca2+ calculate the molarity of the EDTA solution we used, which is Ca2+ + EDTA4- ----> [CA(EDTA)]2-

### algebra

solve the equation. Enter the answer as a comma-separated list. if there is no real solution, enter no real solution. x upper 2 - 10x+20=0

### chemistry

estimate the mass of BaSO4 that will be produced when a 100ml of a 2M solution of Ba(NO3)2 in water is added toa 100ml of a 2M solution of NaSO4 in water

### analytical chemistry

A solution containing 0.40 M B (a weak base) and 0.20 M BH+ (the salt of the weak base) has a pH = 10.30. What is the pH after 25 mmol of HCl is added to 250 mL of this solution?

### Chemistry

100g of a saturated solution of KNO3 was cooled from 80 degrees to 50 degrees. What mass of KNO3 would be expected to crystallise out of the solution?

### chemistry

if 5.105 gm of KHP (Mwt=204.2)was dissolved in 250 ml,10.70 ml of this solution of KHP was titrated with 10.0 ml of NaOH . Calculate the concentration of NaOH solution

### DON VASCO PATNA

A salt solution of 15 litres contains 20% salt.How much water must you add to salt solution in order to dilute it 15% salt?

### chemistry

A buffer solution is made by dissolving 0.45 moles of a weak acid (HA) and 0.13 moles of KOH into 760 mL of solution. What is the pH of this buffer? Ka = 3.3 × 10−6 for HA.

### Chemistry help

1. Find the pH when there are 0.034 moles of h+ in a liter of solution 2. Find the pH when there are 1.6x10^-7 moles of h+ in 500 ml of solution Please help me on these only problems im struggling with, thank you!

### Chemistry

A solution containing 0.0158 M maleic acid and 0.0226 M disodium maleate. The Ka values for maleic acid are 1.20 × 10-2 (Ka1) and 5.37 × 10-7 (Ka2). What is the pH of the solution ?

### CHEMISTRY !!! HELP !

A solution containing 0.0158 M maleic acid and 0.0226 M disodium maleate. The Ka values for maleic acid are 1.20 × 10-2 (Ka1) and 5.37 × 10-7 (Ka2). What is the pH of the solution ?

### Chemistry

calculate the % dissociation of a 0.750M acetic acid solution and 0.50 M sodium acetate solution. I got the % for acetic acid to be 0.48% but cant finish the question.

### chemistry

You are given a 500 mL stock solution of 10%CaCl2 and are askes to prepare a 50 mL solution of .5% CaCl2. How would you prepare it? Please show work

### Chemistry

A saturated solution of NH4Cl was made using 500g of water at 90 degrees. the solution was cooled to 50 degrees. what mass of NH4Cl was crystallized

### chemsitry

Consider the diprotic acid H2A with K1 1*10^-3 and K2= 1*10^-9 . Find pH, [H2A], [HA], and [A2-] for a .2000M solution of H2A b)Find pH, [H2A], [HA], and [A2-] for a .200M solution of HA- c) Find pH, [H2A], [HA], and [A2-] for a .200M solution of A-

### Chemistry

The boiling point of a solution increases directly as a function of the number of moles of solute present in a given mass of solution. This relationship is expressed mathematically by the following equation. ΔTb = Kb·m ΔTb is the boiling-point elevation of a solution, m is ...

### Chemistry

In lab we did thermochemistry, where we are supposed to find the heats of solution, heat change of calorimeter and molar heat solution of the salt. I calculated that the calorimeter constant for the water we had was 883.194 Joules. We took 1/10 of a mole of NH4Cl and tried to ...

### Astronomy

Which of the below statements about the CMB are true? (i) The “hot” and “cold” spots are areas where photons have slightly more or less energy than average. (ii) It shows that the Universe was accelerating at the time the CMB formed, thus measuring dark energy early in...

### Chemistry

80.0 grams of KBr is mixed with sufficient water to prepare 1865 mL of solution. This solution is then mixed with 46.3 mL of 0.425 M KCl solution. 12 mL of this mixture is subsequently added to 61.0 mL of distilled water. Calculate the molarity of K+ ions in the final mixture...

### math

An 800 g solution of acid and water contains 128 g of acid. What percent of the solution is acid?

### Chemistry

A 200 mg/dl solution was diluted 1:10. This diluted solution was then additionally diluted 1:5. What us the concentration of the final dilution?

### chemistry

To what volume should you dilute 30 mL H2SO4 of a 10.0 M H2SO4 solution to obtain a 0.140 M H2SO4 solution?

### chemistry

To what volume should you dilute 30 mL H2SO4 of a 10.0 M H2SO4 solution to obtain a 0.140 M H2SO4 solution?

### algebra

How many kilograms of pure alcohol must be added to 40 kg of a 70% alcohol solution to produce an 85% alcohol solution?

### algebra

A 400 g solution is 25% salt. How much salt must be added to produce a solution that is 40% salt?

### algebra

A 400 g solution is 25% salt. How much salt must be added to produce a solution that is 40% salt?

### chem

a solution is prepared with 3.26g kcl and water to make 25.0ml,of kcl,what is the %(m/V) of the kcl solution.

### Chem

A bottle of win contains 12.5% ethanol by volume. The density of ethanol (C2H5OH) is .79 g/mL. Calculate the concentration of ethanol in wine as mass percent and molality. I calculated molality as 2.4 m/kg, but I'm stumped on the mass percent [although I'm hitting the right ...

### Chemistry multiple choice

During today’s experiment we will produce hydrogen gas (H2) using zinc metal (Zn(s)) and hydrochloric acid (HCl). Which is a balanced net ionic equation illustrating this process? A. Zn (s) + 2 HCl (aq) --> Zn2+ (aq) + H2 (g) + 2 Cl- (aq) B. Zn (s) + 2 H+ (aq) --> Zn2...

### chemistry

A student placed 10.5 g of glucose C6H12O6 in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100.mL mark on the neck of the flask was reached. The flask was then shaken until the solution was uniform...

### Chemistry

For this question, I know how to answer the first three questions, but not the rest. 12ml 0.025 M of benzoic acid (Ka=6.3x10-5)is titrated with 0.050 M NaOH. How many moles of benzoic acid are there? I got 0.0003 What volume of NaOH is required?(L) I got 0.006 What is the ...

### chemistry

A 1.0 M acetic acid solution (CH3COOH, pKa = 4.7) is neutralized by dissolving NaOH(s) (a strong base) in the solution. Estimate the pH at the equivalence point of the neutralization process: 4.7 7.0 9.3 Which one of the following statements best explains your prediction? 1. ...

### Chemistry

An element has bcc packing with a body-centered cubic unit cell. Its density is 19300 kg/m3 and the unit cell volume is 3.17 x 10-26 L. Calculate the molar mass (g/mol) of the element to three significant figures. The element rubidium has bcc packing with a body-centered cubic...

### Chemistry

If 15.0 mL of a 1.5M HCl solution at 22.5 degrees C is mixed with 25.0mL of a 1.5M NaOH solution at 21.5 degrees C that is in a calorimeter, and the final mixed solution temperature ends up at 28.5 degrees C, 1.)what is the balanced equation for this reaction? 2.) what is the ...

### Chemistry

A 0.750 g sample of an unknown solid is dissolved in 100 mL of water and acidfied with 25 mL of 3 M H2SO4 then titrated with a 0.0200 M KMnO4 solution. If the unknown solid requires 12.5 mL of the KMnO4 solution to reach the endpoint, what is the % sodium oxalate in the ...

### Biology

6. Consider an experiment in which starch is dissolved in a liter of water. Some of the solution is placed into a securely tied dialysis bag. The dialysis bag is placed into a beaker containing distilled water and iodine for 30 minutes. What are the correct answers for the ...

### Organic Chemistry

The solubility of compound A in ethanol is 0.5 g per 100 mL at 0oC and 5.0 g per 100 mL at 78oC. (a) To make a hot, saturated solution of 15.0 g of A at 78oC, how much ethanol is required? (b) When the solution prepared in is cooled to 0oC, how much of compound A will be ...

### science

A student prepared a .10M solution of acidic acid. Acidic acid has a Ka of 1.75 x 10-3. What are the hydronium ion concentration and the PH of the solution? I think the PH is 1.76 because I hit -log(1.75 x 10-3) on my calculator and that's what I got thanks in advance for your...

### science

Is a gelatin dessert a solution, a suspension or a colloid? I think it is a suspension. Thanks you. The ingredients of gelatin are completely soluble in water and the end product is clear and transparent. It is a solution, in my opinion.

### Chem II

A 0.10 M HF solution is 8.4% ionized. Calculate the H^+ ion concentration. Here is my line of thought. For every mole HF disolved yeilds one mole of H^+. Since there is ).10 M HF, and the solution is 8.4% ionized = 0.84 M. Is this correct?

### Chemistry

You have a 12 M solution of hydrochloric acid. How many milliliters of this solution will give 25.0 mL of 2.0 M hydrochloric acid when diluted? Where to start, and Where to end. The process of figuring this problem would be greatly appreciated.

### organic chemistry

A solution of acetic acid (CH3COOH; Ka = 1.74 x 10-5) was titrated to a final pH of 4.76 by using NaOH solution. What % of acetic acid is converted to sodium acetate (CH3COO-Na+)? Show your method

### chemistry

Calculate the solubility (in grams per 100 mL of solution) of magnesium hydroxide in a solution buffered at pH = 12. I can get the answer in grams per mole, but i am having difficulty changing it to g/100ml.

### math

Explain, in complete sentences, how you would use the graphing method to solve the following system of equations. Provide the solution to the system and explain what the solution represents on the graph. x + 4y = –16 3x + 2y = 12

### Chemistry

Given a solution of ammonium chloride. What additional reagent or reagents are added to prepare a buffer from the ammonium chloride solution? I know the answer is NaOH but I don't know why. Can someone explain this to me please?

### Chem

a blue solution of copper(II) sulfate is mixed with a colerless solution of sodium phosphate and a blue percipitate is formed. Using solubility rules predict the formula of the percipitate

### chemistry

Determine the of mole of water molecules in one mole of a sample of an iron containing (nh4)2so4. FeSO4. nH2O. titrate a solution of the iron containg (solution Y)

### Chemistry

An aqueous solution that 2.10 M in AgNO3 is slowly added from a buret to an aqueous solution that is 1.20×10^−2 M in Cl- and 0.260 M in I- . When the second ion begins to precipitate, what is the remaining concentration of the first ion?

### Chemistry

An aqueous solution of HCl has a high electrical conductivity when compared to the compound in hexane, whilst the conductivity of a solution of the compound in diethyl ether has an intermediate value. Explain.

### science

When a 30 mM aq solution of sodium acetate was prepared in the lab it had a pH of 8.8. Calculate the amount of acetic acid (in g) to be added to 0.5 L of this sodium acetate solution in order to bring its pH to the target value of 5.00.

### chemistry

1.00 of an aqueous solution contains 1.52g of a compound used in antifreeze. If the osmotic pressure of this solution at 20.0 degree C is 448 torr, calculate the molar mass of the antifreeze compound

### Chemistry

how would you do this question when i did it i did -log(1.0) but that is just 0 so what it the procedure to do this question Calculate the pH of a 1.0 mol/L aqueous solution of sodium benzoate. Note: Only the benzoate ion affects the pH of the solution.

### Chemistyr

A 55.29-g sample of Ba(OH)2 is dissolved in enough water to make 1.20 L of solution. How many milliliters of this solution must be diluted with water in order to make 1.00 L of 0.100 M Ba(OH)2? (Ignore significant figures for this problem.)

### Chemistry

A 55.29-g sample of Ba(OH)2 is dissolved in enough water to make 1.20 L of solution. How many milliliters of this solution must be diluted with water in order to make 1.00 L of 0.100 M Ba(OH)2? (Ignore significant figures for this problem.)

### chemistry

2. A solution of I2 was standardized with ascorbic acid. Using a 0.1000-g sample of pure ascorbic acid, 25.32 mL of I2 were required to reach the starch end point. a) What is the molarity of the iodine solution?

### Utlwanang Barolong secondary school

physical science it is found that 40 ml of a 0.5mol.dm^-3 sodium hydroxide solution is needed to neutralise 20mol of the vinegar. calculate the pH of the sodium hydroxide solution

### Chemistry

What volume (in mL) of a 0.300 M HNO3 solution will completely react with 43.9 mL of a 0.146 M Na2CO3 solution according to this balanced chemical equation? Na2CO3(aq)+2 HNO3(aq)->2 NaNO3(aq)+CO2(g)+H20(l)

### Chemistry

What volume (in mL) of a 0.300 M HNO3 solution will completely react with 43.9 mL of a 0.146 M Na2CO3 solution according to this balanced chemical equation? Na2CO3(aq)+2 HNO3(aq)->2 NaNO3(aq)+CO2(g)+H20(l)