# a density of 1.0 M solution of NaCL

29,400 results, page 69

### mes

a solution of sugar in water is 5% by mass. how much sugar is present in 250 gm. of solution?

### Math

How many liters of water should be added to 20 liters of 40% solution of acid to obtain 30% solution?

### Chemistry

If 62.7 ml of .208M HCL is needed to needed to neutralize a solution of Ca(OH)2, how many grams of Ca(OH)2 must be in the solution?

### chemistry

what is the molarity of a HCl solution that contains 13.0 g of HCl in 125 mL of solution? Answer in units of M

### Chemistry

An aqueous solution is 0.257 m NaOH. What are the boiling point and freezing point of this solution?

### chemistry

what are the steps for making 0.5 aqueous solution of MgCl2? What are the necessary steps to make this solution?

### algebra 1

y=2x-1 2x-y-1=0 a)this sytem has excatly onw solution b)this system has indinetly many solutions c)this system has no solution d)(1,1) and (0,0)

### Chemistry

Describe how to make 2.5L of 0.1M HCL solution from 12M HCL concentrated solution and water. Thank you

### chemistry

It takes 62 mL of 0.124 M KOH to neutralize46.7 mL of H2SO4 solution. What is the concentration of the H2SO4 solution?

### Chemistry

When investigating heat of solution of NaoH& NH4No3, what is the heat of solution of the two cpds?

### Chemistry

A 15.0 mL sample of 0.250 M H2SO4 is neutralized by 20.5 mL of KOH solution. What is the molarity of the KOH solution?

### Chemistry

If you have 200ml of 25% aqueous solution of ethanol, what volume of ethanol and water are in the solution?

### Chemistry

150cm3 of KOH solution containing 5.6g of KOH per dm3 of solution.what is the concentration?

### Chemistry

A solution contains 0.00245 M HCl. Determine the [H3O+] for the solution. points Determine the [OH-]

### Chemistry

suppose you added 26.0 ml of 0.01 M NaOH to the solution, what is the molarity of excess NaOH in the mixture? what is the ph of this solution?

### chemisty

how many mL of a stock 2.50M HCI solution are required to prepare 25.mL of a 0.15M HCI solution?

### Chemistry

How many mL of a stock 2.50M HCl solution are required to prepare 25.0 mL of a 0.15M HCl solution?

### mathematical physics

Show that: (I) u = e^xsiny is a solution of Laplace's equation. (ii) u = x^2+t^2 is a solution of the wave equation.

### mathematical physics

Show that :(i) u=e^xsiny is a solution of Laplace's equation. (ii) u= x^2+t^2 is a solution of the wave equation.

### mathematical physics

Show that : (I) u = e^xsiny is a solution of Laplace's equation. (ii) u= x^2+t^2 is a solution of the wave equation.

### mathematical physics

Show that :(I) u = e^xsiny is a solution of Laplace's equation. (ii) u = x^2+t^2 is a solution of the wave equation.

### math

25.0 mL of an unknown HCl solution is titrated with 17.5 mL 0.100 M NaOH. What is the Molarity of the HCl solution?

### science

25.0 mL of an unknown HCl solution is titrated with 17.5 mL 0.100 M NaOH. What is the Molarity of the HCl solution?

### chemistry

If 17.5 mL of 0.553 M KOH is needed to neutralize 25.0 mL of an HBr solution what is the molarity od HBr solution

### math

How many grams of water are needed to reduce 100g of a 30% acid solution to a 10% acid solution?

### chemistry

a given sample of MgCl2 solution has 6×10^23 ions. what is the number of Cl(-1) ions in the same solution?

### chemistry

what volume of a 0.5M solution of sulphuric acid is required to prepare 2 litres of a 0.4M solution of the acid

### Chemistry

1.000 grams of KHP consumed 43.3 mL of KOH solution. What is the molarity of the KOH solution?

### algebra

What would the concentration be if we mixed 200 of 10% sugar solution and 300 of 20% sugar solution ?

### ANALYTICAL CHEMISTRY

3. How many moles of HCl are required to make 15.00 mL of an aqueous 2.500 molar HCl solution? How many moles of Cl- are in 1.000 mL of the aqueous 2.500 molar HCl solution mentioned above? How many moles of H+ are in 1.000 mL of the aqueous 2.500 molar HCl solution mentioned ...

### ANALYTICAL CHEMISTRY

3. How many moles of HCl are required to make 15.00 mL of an aqueous 2.500 molar HCl solution? How many moles of Cl- are in 1.000 mL of the aqueous 2.500 molar HCl solution mentioned above? How many moles of H+ are in 1.000 mL of the aqueous 2.500 molar HCl solution mentioned ...

### chemistry

A mixture of NaCl and NaBr has a mass of 2.04g and is found to contain 0.70g of Na. What is the mass of NaBr in the mixture?

### chemistry

All of the following acid-base pairs are examples of buffers EXCEPT: (Question from "Cracking the MCAT, 2010-2011 edition" by The Princeton Review) HCl/NaCl CH3CO2H/NaCH3CO2 HF/NaF H2CO3/NaHCO3 I chose ch3co2h/nach3co2

### Chemistry

A student weights 1.700 g of succinic acid and dissolves it in water in a 250.0 mL volumetric flask. A 25.00 mL sample of this solution is withdrawn and placed in a 125 mL Erlenmeyer flask, to which 5 drops of the acid-base indicator phenolphthalein is added. This solution is ...

### Chemisty

Let's explore the efficiency of chloride ion precipitation in seperating Ag^+ from Pb^2+ in a solution. Suppose that [Pb^2+]= 0.045 mol/L and [Ag^+]= 0.084 mol/L. Calculate the chloride ion concentraion required to just start precipitation of Pb^2+ ion and then calculate the ...

### College Chemistry lab

How do I Calculate the concentration of iron(lll) with absorbance measurement. Wavelength is 480nm, solution is 1 ml FeCl3 : 9ml HCl, absorption is .250A, concentration of stock FeCl3 solution is 0.00050M and stock HCl solution is 2.0M. I not sure how to use beer's law to find...

### General Chemistry

Carbonic acid forms when carbon dioxide dissolves in water. A typical can of soda contains a 0.120 M solution of CO2. Assuming that all dissolved CO2 is present as carbonic acid, and that no other substances dissolved in solution affect the pH, what is the pH of this solution...

### chemistry- pH, neutralization

What volume of NaOH was required to have neutralized the HCl. HCl + NaOH --> H2O + NaCl There no other information given in the problem except in later questions like the NaOH had 0.1 M and that there was 50.00 mL of HCl.

### Chemistry

Suppose 49.6 mL of 0.242 M CoCl2 solution is added to 23.8 mL of 0.361 M NiCl2 solution. Calculate the concentration, in moles per liter, of each of the ions present after mixing. Assume that the volumes are additive. I'm not sure what to do! Thank you!

### Chemistry

What volume of solution do you have if you know you dissolved 0.0500g nitric acid to make solution that was determined to be 0.0793M (molarity). My teacher gave 10.0 mL as the answer, but I got .0098. Not quite sure where I went wrong.

### chemistry

The solid oxide of generic metal M is added to 75 mL of water and reacts to produce a basic solution that is 0.20 M in the resulting compound. Neutralization of the solution required titration with 27 mL of 0.56 M HCl. How many valence electrons must M have?

### Chemistry #4

What is the concentration of a solution formed by dissolving 10.0g of ammonium acetate in enough water to form 150.0mL of solution? Could someone please explain and show me how to do this? I have the answer= .865M But I am not sure exactly how?!

### physics

Question 6) Oil and gas exploration companies find new underground deposits by measuring (with incredible precision) the value of g at the Earth's surface. EXTRA INFO GIVEN: The challenge: F=Gm1m2/r^2 ONLY works for two cases: point masses, or if one of the masses has ...

### General Chemistry

I add 5 drops Potassium Iodide (KI) to 5 drops lead nitrate (PbNO3). The solution is centrifuged and the aqueous layer is discarded. I then add 5 drops of nitric acid (HNO3), 5 drops of hydrogen peroxide and 10 drops of dichloroethane (C2H4Cl2) to the precipitate. The solution...

### Chemistry

n our text book the following equation is given: P=(pm - p)g * R where P is the pressure drop R is the manometer reading pm is the density of the manometer fluid p is the density of the process fluid in the pipe g is the acceleration do due to gravity Then our professor told ...

### chemistry

the question reads: a) balance the equation: H3PO4 + Ca(OH)2 --> Ca3(PO4)2 + H2O b)what mass of each product results if 750 mL of 6.00 M H3PO4 reacts according to the equation? i balanced it with: 2H3PO4 + 3Ca(OH)2 --> Ca3(PO4)2 + 6H2O but i'm not sure where to go from ...

### math

Decide whether each equation has one solution, no solutions, or infinitely many solutions. 1. 2(x – 3) = 2x one solution no solutions infinitely many solutions 2. 3(y – 3) = 2y – 9 + y one solution no solutions infinitely many solutions 3. 10x – 2 – 6x = 3x – 2 + x...

### math

Decide whether each equation has one solution, no solutions, or infinitely many solutions. 1. 2(x – 3) = 2x a.one solution b.no solutions c.infinitely many solutions 2. 3(y – 3) = 2y – 9 + y a.one solution b.no solutions c.infinitely many solutions 3. 10x – 2 – 6x = ...

### chemistry

Titration was used to determine the molarity of acetic acid in vinegar. A primary standard solution of KHP was used to standardize the NaOH. 1. When performing this experiment, impure KHP was used to standardize the NaOH solution. If the impurity is neither acidic or basic, ...

### Science

A liquid solution of formaldehyde is 37% pure. This solution has a specific gravity of 1.037. The molecular weight of formaldehyde is 30.0. To 1.00 ml of this impure stock solution is added quantity sufficient total the total volume to 500 ml. If 1.00 ml of this solution is ...

### Chemistry

One half-cell of a concentration cell consists of a silver wire dipping into a 1.00 M solution of Ag+. The second half-cell consists of a silver electrode in a solution containing an unknown concentration of Ag+. The measured cell potential was determined as 226 mV at 25°C. ...

### Biology

What happens when a substance dissolves in the watery solution outside of a cell and equilibrium is disrupted. a. Water from the cell will move into the solution b. water from the solution will move into the cell c. the pores in the cell membrane will become clogged with the ...

### Chem (ques 2)

The analysis of some household cloudy ammonia cleaner involved diluting a 50.0mL sample of the cleaner to a volume of 250.0mL then titrating this diluted solution. The diluted sample was found to have an NH3 (aq) concentration of 0.350 mole per L. What is the percentage by ...

### chemistry

find the mass of silver chloride formed from 33.2ml of a 0.100M solution of silver nitrate and 200ml of 0.200M solution of calcium chloride solution Solution plan:use mass to mass calculations mass of AgNO3-moles of AgNO3-moles of AgCl-mass of AgCl 0.1mol/1L*0.0332L+0.200mol/...

### Science

Four students dissolved 30g of salt in a 200ml solution of water.Each student heated his or her water solution to a different temperature ( Marcus had 10 and tyra had 25 Luis had 50 and Andrew had 75) which student most likely had the solution with the fastest dissolving rate ...

### Mole fraction of a vapor pressure?

If 0.380 mol of a nonvolatile nonelectrolyte are dissolved in 3.00 mol of water, what is the vapor pressure P(H2O) of the resulting solution? The vapor pressure of pure water is 23.8 torr at 25 C. I got this answer correct: 21.1 torr A solution is composed of 1.50mol ...

### chemistry

Bill finds an unusual object and wishes to calculate it's density. He discovers a problem of accurately weighing it, because it won't stay on the weighing pan. To solve this he adds the object to a beaker containing 190 mL of distilled water and finds the water level rises to ...

### AP CHEMISTRY

A solution is prepared in which a trace or small amount of Fe2+ is added to a much larger amount of solution in which the [OH-] is 1.0 x 10^-2 M. Some Fe(OH)2 precipitates. The value of Ksp for Fe(OH)2 = 8.0 x10^-10. (A) Assuming that the hydroxide is 1.0 x 10^-2 M, calculate ...

### College Chemistry

A student placed 14.0g of glucose (C6H1206) in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100.-mL mark on the neck of the flask was reached. The flask was then shaken until the solution was ...

### College Chemistry

A student placed 14.0g of glucose (C6H1206) in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100.-mL mark on the neck of the flask was reached. The flask was then shaken until the solution was ...

### College Chemistry

A student placed 14.0g of glucose (C6H1206) in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100.-mL mark on the neck of the flask was reached. The flask was then shaken until the solution was ...

### Math

1. ABC Feeds has two different types of cattle feed containing crude protein in the amount of 45% and 20% respectively. How many of each type must a feed lot manager mix together to obtain 10 000lbs of a mixture that is 25% protein? 2. Meg has a solution that is 40% alcohol ...

### Chem

Consider a solution that contains both C5H5N and C5H5NHNO3. (Kb for pyridine, C5H5N, is 4.0 x 10^-4) (a) Calculate the ratio of [C5H5N]/[C5H5NH+] if the solution has a pH of 4.50. (b) Calculate the ratio of [C5H5N]/[C5H5NH+] if the solution has a pH of 5.00.

### chemistry correction

1. Which two elements react vigorously with each other? A: Chlorine and lithium B:Chlorine and potassium C:iodine and lithium D:iodine and potassium my answer is B 2. which statement about electronegativty is correct. A: Electronegativity decrease across a period. B:...

### personal knowledge

I was just wondering if it would make any difference if one were to use calcium bromide solution instead of sodium bromide solution. It depends on what you are using if for.

### chemistry

A sample of the primary standard, Potassium hydrogen phthalate, weighing 0.3589g requires 14.96mL of NaOH solution for neutralization. calculate the molarity of the NaOH solution.

### chemistry.

When 41.81 of a solution of aqueous sliver ions with a concentration of 0.2040 mol dm3 is added to a solution of XO-3/4 ions, 1.172g of the precipitate is formed? ..Can any one help me with that! NB: -3/4 mean that 3 is up and 4 is under it.

### chemistry

in making a solution of an unknown solid substance to test it for the presence of ions, would it matter if you used pure water or tap water to make the solution

### chemistry

a scientist wants to make a solution of tribasic sodium phosphate ,Na3PO4, for an experiment. how many grams of Na3PO4 will be needed to produce 750 mL of a solution that has a concentration of Na+ ions of 1.30M

### Math/Algebra

Solve the following system of equations. x+7y=8 (1) x=2-7y (2) What is the solution of the system? Type the ordered pair state that there is no solution. I don't understand what they are asking me to do. Should I use #2 in equation #1 or something else?

### CHEIMISTRY

A buffer solution is 0.20 M in HPO42- ions and 0.l0 M in H2PO4- ions. What is the H3O+ ion concentration of the solution? The ionization constants for H3PO4 are as follows: Ka1 = 7.5 ´ 10 -3, Ka2 = 6.2 ´ 10-8, Ka3 = 1 ´ 10-12. a. 3.7 ´ 10-3 M b. 3.7 ´ 10-4 M c. 3.1 ´ 10-...

### science

Balancing redox reactions Balance in acid solution 1. PH3+ I2 -> H3PO4 + I- 2. ClO3- + Cl- -> Cl2 Balance in basic solution Se -> Se2- + SeO3^2- BrO- + Cr(OH)4^- -> Br- + CrO4^2-

### chemistry

A scientist wants to make a solution of tribasic sodium phosphate, \rm Na_3PO_4, for a laboratory experiment. How many grams of \rm Na_3PO_4 will be needed to produce 575 mL of a solution that has a concentration of \rm Na^+ ions of 1.00 \it M?

### chemistry

A scientist wants to make a solution of tribasic sodium phosphate, \rm Na_3PO_4, for a laboratory experiment. How many grams of \rm Na_3PO_4 will be needed to produce 575 mL of a solution that has a concentration of \rm Na^+ ions of 1.00 \it M?

### math

Here are a few problems I need solving Make sure to show a check for the solution and write the solution in set notation like {x|x>5}: Solve for y -7y-14>42 Solve for x -2(4x+5) < 2x-20

### Chemistry

Calculate the solubility of LaF3 in grams per liter in the following solutions. The Ksp of LaF3 is 2.01 e-19. (a) pure water (b) 0.051 M KF solution (c) 0.065 M LaCl3 solution

### CHEMISTRY- vant hoff

a 0.100m k2so4 solution has a freezing point of -0.43 degrees. what is the van hoff factors for this solution? kf=1.86degree/m? 0.77 3.0 1.0 2.3 i have used the equation dT=iKfm and get -2.3?

### Chemistry

When 2.50g of an unknown solute is dissolved in 40.0g of ethanol the solution boils at 79.4C. The normal boiling point of this substance is 78.4C and it has a kb of 1.22C/m. (a) What is the molality of this solution? (b) What is the molecular weight of the solute?

### chemistry help

a 4.50 sample of LiCl at 25.0*C dissolves in 25.0 mL of water also at 25.0*C. The final equilibrium temperature of resulting solution is 60.8*C. What is the enthalpy of solution, of LiCL expressed in kilojoules per mole?

### chemistry help

a 4.50 sample of LiCl at 25.0*C dissolves in 25.0 mL of water also at 25.0*C. The final equilibrium temperature of resulting solution is 60.8*C. What is the enthalpy of solution, of LiCL expressed in kilojoules per mole?

### Chemistry

If 0.630 grams of HNO3 (molecular weight 63.0) are placed in 1 liter of distilled water at 25 degrees C, what will be the pH of the solution? (Assume that the volume of the solution is unchanged by the addition of the HNO3.) A. 0.01 B. 0.1 C. 1 D. 2 E. 3

### Chemistry

The blank solution used to calibrate the spectrophotometer is 10.0mL of 0.2M Fe(NO3)3 diluted to 25.0mL with 0.1M HNO3. Why is this solution preferred to simply using de-ionized water for the calibration?

### Chemistry

50 mL of a 2.5 M solution of ammonium phosphate is added to 100 mL of 1.5 M solution of calcium nitrate. At the end of the reaction 11.2 grams of solid product were obtained. Whats the % yield of this reaction?

### chemistry

Using a pipet, 25 mL of a 0.1205 M HCl solution was placed in a 100 mL volu metric flask and the flask filled to the mark with water. What is the concentration of the new solution?

### chemistry

When making pepsin in acetic acid, can I apply heat to the solution? What is the appearance of the pepsin solution should be? I'm not sure if it has to be really transparent, I know that it looks kinda yellow.

### chemistry

When making pepsin in acetic acid, can I apply heat to the solution? What is the appearance of the pepsin solution should be? I'm not sure if it has to be really transparent, I know that it looks kinda yellow.

### chemistry

A scientist wants to make a solution of tribasic sodium phosphate, Na3PO4, for a laboratory experiment. How many grams of Na3PO4 will be needed to produce 400 mL of a solution that has a concentration of Na+ ions of 1.00 M?

### chemistry

Calculate the concentration of nitrate ions, NO3- , in mol dm-3, of a solution made by dissolving 2.5000 g of ferric nitrate nonahydrate in water to give 2.000 L of solution.

### chemistry

Why do the concentrations of Pb 2+ and SO4 2- ions in a saturated solution of PbSO4 in contact with solid PbSO4 remain the same when the solution evaporates to half of its original volume? it has to do with equilibrium.

### Chemistry

calculate the ph of a solution that results from titrating 0.0500 moles of cyanic acid to the equivalence point with an equal number of moles of OH-, if the final volume of the solution is 150 ml ka= 3.50 * 10^-4

### Chemistry

500ml of 0.250M Na2SO4 solution is added to an aqueous solution of 15.00 g of BaCl2 resulting in the formation of white precipitate of BaSO4. How many moles and how many grams of BaSO4 are formed?

### Chemistry Help

Write a balanced equation for the reaction between an aqueous solution of calcium nitrate being mixed with an aqueous solution of sodium phosphate Identify the precipitate.

### Chemistry

When a 5.00 ml sample of vinegar is titrated, 44.5 ml of 0.100 m NAOH solution is required to reach the end point. What i sthe concentration of vinegar in moles per liter of solution?

### chemistry

sodium metal dissolves im liquid mercury to form of NA(s) and Hg(l) are 0.97 g/ml and 13.6 g/ml respectively. a sodium amalgoum is made by dissolving 10 ml Na (s) in 20.0 ml Hg (l). The final volume of solution is 21.0 ml. Calculate the molarity of Na in the solution.

### CHEMISTRY

How many grams of NaNO2 should be dissolved in 500cm3 solution of nitrous acid (HNO2) with concentration of 0.03mol/dm3 if we wish the solution to show a pH of 3.2 Ka = 4.5 * 10^-4 M(NaNO2) = 69 g/mol

### Chemistry

59.0 mL of a 1.80 M solution is diluted to a total volume of 268 mL. A 134-mL portion of that solution is diluted by adding 171 mL of water. What is the final concentration? Assume the volumes are additive.

### chemistry

53.0 mL of a 1.50 M solution is diluted to a total volume of 258 mL. A 129-mL portion of that solution is diluted by adding 195 mL of water. What is the final concentration? Assume the volumes are additive.

### Alg 1

Completing the square: Which of the following is a solution x^2 + 14x + 112 = 0? If necessary round to the nearest hundredth. x= -0.24 x= -4.24 x= 4.24 no solution I worked it and got neither of the answers. I got x= 0.9 and x=-14.9. Where did I go wrong? Thanks

### Alg 1

What are the approximate solutions of 2x^2 -x + 10 = 0 In working this, I came up with a negative (-79) under the radical sign. Can I take the sq rt of a negative? my choices are: -2, 2.5 -1.97, 2.47 -2.5, 2 No solution I think it is no solution. Is this correct? If not, ...