# a density of 1.0 M solution of NaCL

29,400 results, page 56

### algebra

A chemist mixes some 20% acid solution with pure 100% acid to increase the concentration. How much pure acid and acid solution should be mixed to form 100 milliliters of 40% acid solution?

### algebra 2

A chemist mixes some 20% acid solution with pure 100% acid to increase the concentration. How much pure acid and acid solution should be mixed to form 100 milliliters of 40% acid solution?

### Science

1) A piece of paraffin wax has a density of 9g/cm3, mass of 900g, and a volume of 100cm3. If the wax was melted to the liquid state, approximately what would it's volume be? Would this wax float or sink in water? Explain. 2) A tin box ( Mass of 80g, Volume of 100cm3, and ...

### Chemistry

In the titration of a solution of a weak acid HA with NaOH the pH is 5.0 after 10ml of NaOH solution has been added and 5.6 after 20ml of the NaOH solution has been added. Find the PKa of HA? Pls give some hints to solve this question...

### Moorpark

A solution contains an unknown mass of dissolved barium ion. When sodium sulfate is added to the solution, a white precipitate forms. The precipitate is filtered and dried and then found to have a mass of 210 mg. What mass of barium was in the original solution? (Assume that ...

### Math

Please help!!!! Solve each system graphically. Be sure to check your solution. If a system has an infinite number of solutions, use set-builder notation to write the solution set. If a system has no solution, state this. 6x - 2y = 2, 9x - 3y = 1 My answer: Equation 1 X-...

### algebra 1

A chemist has one solution containing 30% insecticide and another solution containing 50% insecticide. How much of each solution should the chemist mix to get 200 L of a 42% insecticide? My teacher explained how to set up the problem: 3x+5y=84 x+y=200 what I don't get is why ...

### Biochemistry

Can someone help me calculate protein concentration using the Bradford Assay? If you could show me how to do tube 2, that'd be great. Tube 1: 0 ul Protein Stock Solution, 800 ul Water, 0 ug Protein, Absorbance @595nm = 0 Tube 2: 10 ul Protein Stock Solution, 790 ul Water, 1.4 ...

### Chemistry

A 15mL sodium hydroxide solution of unknown concentration is titrated with 34.5 mL of 1.2M HCl solution. What was the concentration of the sodium hydroxide solution?

### ALGEBRA

CLASIFY THE SYSTEM { X-Y+Z=6 { 7X-2Y-2Z=1 { 5X+6Y+3Z=11 A)CONSISTENT. ONE SOLUTION B)INCONSISTENT. INFINITELY MANY SOLUTIONS C)INCONSISTENT. NO SOLUTION D)CONSISTENT. INFINITELY MANY SOLUTION

### Math

1) Find the solution to the following system of two linear equations, if it has a solution. 2x-y=3, -x+y=1 2Find the solution to the following system of two linear equations, if it has a solution. 2x+y=4, x+3/2y=3

### Math

1. Which number is the resolution of m + 90 = 150? a. 50 b. 60 (my answer) c. 140 d. 240 2. Which number is the solution of n/3 = -12? a. -36 b. -4 (my answer) c. 4 d 36 3. Use mental math to find the solution of 19b = 190. a. 10 b. 11 c. 171 (my answer) d. 208 4. Estimate the...

### Chemistry

the solubility of aspartic acid in water is .500 g in 100 mL at 25 degrees C. If .251 g of aspartic acid is dissolved in 50. mL of water at 50 degrees C and let solution cool to 25 degrees C. is the solution supersaturated, saturated, or unsaturated. the solution was not ...

### Chem

Calculate the concentration in mol per litre of ammonium ions in a solution solution prepared by mixing 360.0mL of 0.250 mol per litre ammonium sulphate solution with 675.0mL of 1.20mol per litre ammonium nitrate solution. Assume solution volumes are additive. I got 0.870 mol ...

### Chemistry

What would be the effect on Ksp if an unsaturated solution of CaSO4 was titrated instead of a saturated solution of CaSO4. would ksp be higher, lower or the same? would ksp be higher due to the more ions available in the solution. so you would have to use more titrant to equal...

### O- chemistry

During a recrystalliztion experiment, a student allows the hot solution to cool to room temperature, then chills the solution in an ice bath. Is the student using correct recrystallization technique? Why does the student not simply chill the hot solution in an ice bath initially?

### Physical Chemistry

One potential problem with using molarity to express concentration is that molarity is temperature dependent. If you make a 1.000 M solution of aqueous HCl at 25 degrees celsius, what would the molarity of this solution become if the temperature of the solution is elevated to ...

### Chemistry.

hi again, thanks to the previous help i got the first part of the question. the second part builds on the first part as we used that stock solution for titration of the next. we are now given: Concentration of Standard Acid Soultion (M) = 0.100 M Volume of Standard Acid ...

### Physics

A U-shaped tube is filled mostly with water, but some vegetable oil has been added to both sides of the U tube. On the right side of the tube, the depth of oil is 5.00 cm . On the left side of the tube, the depth of the oil is 2.30cm . The density of the water is 1x10^3 kg/m^3...

### physics

A rectangular block of ice 10 m on each side and 1.1 m thick floats in sea water. The density of the sea water is 1025 kg/m3. The density of ice is 917 kg/m3. a) How high does the top of the ice block float above the water level? m * .116 OK HELP: Use Archimedes' Priciple. b) ...

### was not in class bio/ math

Preparing a Solution: A. Calculate the amount of methylene blue chloride (MW = 319.8 g/mol) needed to make 50 ml of a 10 mM stock solution. (Show calculations below) B. If you wanted to then dilute the solution from Part A to a final concentration of 0.1mM (in 50 ml total ...

### Chemistry

100.0cm3 of 2.0mol dm-3 hydrochloric acid is mixed with 2.5g of magnesium oxide powder. The mixture is stirred until no further change occurs. The resulting solution still contains excess hydrochloric acid. Calculate the volume of 1.5mol dm -3 sodium hydroxide solution needed ...

### chem

a 45.8mL sample of a 5.8 M KNO3 solution is diluted to 1.00L. What volume of the diluted solution contains 15.0g KNO3? how do you do this? moles of solution: 5.8*.0458 moles Grams of solute= moles*molmassKNO3 Volume of 15g= 1000ml*15/gramssoluteabove

### Calculus

Let the length of a rod be 10 meters and the linear density of the rod ρ(x) be written in the form ρ(x) = ax + b with x = 0 representing the left end of the rod and x = 10 representing the right end of the rod. If the density of the rod is 2kg/m at the left end and 17 kg/m ...

### chemistry

A chemist makes a “stock” solution of KOH by dissolving 1050.0 grams in enough water to make 1.50 liters of solution. If later on the chemist wants to use this stock solution to make 200.0 mL of 0.10 M KOH, what would the chemist need to do? (Define the steps and show the ...

### Chemistry

1. Imagine you have a saturated solution of Ca(OH)2, at equilibrium, that has some undissolved Ca(OH)2 precipitated on the bottom of the test tube. If you add an additional scoop of Ca(OH)2 to the solution will concentration of [OH-] in the solution (increase, decrease, or be ...

### chemistry

Sodium chloride is decomposed into the elements sodium and chlorine by means of electrical energy. How many grams of chlorine gas can be obtained from 2.50 mol NaCl?

### Chemistry

Table salt, NaCl(s), and sugar, C12H22O11(s), are accidentally mixed. A 5.50-g sample is burned, and 1.80 g of CO2(g) is produced. What is the mass percentage of the table salt in the mixture?

### chemistry

Table salt, NaCl(s), and sugar, C12H22O11(s), are accidentally mixed. A 5.00-g sample is burned, and 2.50 g of CO2(g) is produced. What is the mass percentage of the table salt in the mixture

### chemistry

Table salt, NaCl(s), and sugar, C12H22O11(s), are accidentally mixed. A 4.00-g sample is burned, and 3.30 g of CO2(g) is produced. What was the mass percentage of the table salt in the mixture?

### chem

Table salt, NaCl(s), and sugar, C12H22O11(s), are accidentally mixed. A 5.50-g sample is burned, and 3.10 g of CO2(g) is produced. What was the mass percentage of the table salt in the mixture?

### chemistry

Table salt, NaCl(s), and sugar, C12H22O11(s), are accidentally mixed. A 5.50-g sample is burned, and 1.70 g of CO2(g) is produced. What was the mass percentage of the table salt in the mixture?

### chemistry

Table salt, NaCl(s), and sugar, C12H22O11(s), are accidentally mixed. A 5.50-g sample is burned, and 1.70 g of CO2(g) is produced. What was the mass percentage of the table salt in the mixture?

### Chemistry

1. I do not understand why this cannot go to equilibrium? Na2CO3(aq)+HCl(aq)->H2O(l)+CO2(g)+NaCl(aq) Please explain. 2. Are K subscript c the same as K subscript eq? Do they both stand for the equilibrium constant?

### Chemistry

What are the signs of dH, dS, and dG for the following and please explain why? Also what does it mean by sublimation, and molten? 1. CO2(s) --> CO2(g) (Dry ice subliming) dH = ? dS = ? dG = ? 2. The electrolysis of molten NaCl(l). dH = ? dS = ? dG = ?

### chemistry

Table salt, NaCl(s), and sugar, C12H22O11(s), are accidentally mixed. A 4.00-g sample is burned, and 3.30 g of CO2(g) is produced. What was the mass percentage of the table salt in the mixture?

### Chemistry

Table salt, NaCl(s), and sugar, C12H22O11(s), are accidentally mixed. A 4.00-g sample is burned, and 2.70 g of CO2(g) is produced. What was the mass percentage of the table salt in the mixture?

### Physics

In a cathode ray tube, a beam of electrons is injected horizontally into the exact center of the parallel-plate region. Here L = 3.0 cm and d = 0.20 cm. The top plate has a surface charge density of σ0 = +0.15 μC / m2, and the bottom plate has a surface charge ...

### Chemistry

The vapor pressure of an unknown substance is given at various temperatures. properties of the substance are: density of solid=1.375g/ml density of liquid= 1.150g/ml. freezing point= 275.0K boiling point=375.0 K How would i calculate the vapor pressure at 150.0K measured at ...

### chemistry

We did a LAB where we used a spectrophotometer to measure the absornency of a solution. It was a bluish color, so the question is.... What could be done to modify this experiment if the original solution was colorless? HINT: you can NOT add a coloring agent such as food ...

### calculus maths

Hi can some one help, explain the following please. I seem to have issues with this: 1- Find the corresponding particular solution (in implicit form) that satisfies the initial; condition y = when x = 0. 2- Find the explicit form of this particular solution. 3- What is the ...

### Chemistry

A dilute aqueous solution of an organic compound soluble in water is formed by dissolving 2.35 g of the compound in water to form 0.250 L solution. The resulting solution has an osmotic pressure of 0.605 atm at 25 Celsius. Assuming that the organic compound is a nonelectrolyte...

### chemiestry

One liter of buffered solution should be prepared with a general concentration of 0.320M with a pH of 5.83 : - Pyridine solution (formula: C5H5N) in water at a concentration of 1.00M - HCl solution in water at a concentration of 0.85M - Distilled water In addition, given: ...

### Statistics

Joint probability density function is: x + y where 0<x<1 and 0<y<1 (0 elsewhere) Find variance of (30x + 25y) Answer is 11.48 --- My calculations Marginal probability density functions (same for x and y): f(x) = x + 1/2 over 0<x<1 f(y) = y + 1/2 over 0<y&...

### physics

A large rock that weighs 164.0 N is suspended from the lower end of a thin wire that is 3.00 m long. The density of the rock is 3200 kg/m^3. The mass of the wire is small enough that its effect on the tension in the wire can be neglected. The upper end of the wire is held ...

### Physics

A large rock that weighs 164.0 N is suspended from the lower end of a thin wire that is 3.00 m long. The density of the rock is 3200 kg/m3. The mass of the wire is small enough that its effect on the tension in the wire can be neglected. The upper end of the wire is held fixed...

### Biology

A student wishes to prepare 300 mL of 0.25 M sucrose. He puts 25.7 g of sucrose in a beaker and then adds 300 mL of dH2O. The total volume of the solution after the sucrose has been dissolved is 330 mL. a) What did he do wrong when preparing his solution? b) What is the actual...

### chemistry

2.) If you pass 10.0mL of a 50.0mL solution of [Co(en)2Cl2]Cl that has been reduced with Zn through a cation exchange column, you will obtain a solution that has three H+ ions for every Co3+ ion that was originally present in the sample. These H+ ions are titrated with 0.10-M ...

### chemistry

2.) If you pass 10.0mL of a 50.0mL solution of [Co(en)2Cl2]Cl that has been reduced with Zn through a cation exchange column, you will obtain a solution that has three H+ ions for every Co3+ ion that was originally present in the sample. These H+ ions are titrated with 0.10-M ...

### chemistry

Use a balanced redox equation to answer the following question. 71.7 mL of 1.13 x 10-4 mol L-1 potassium ferricyanide solution is required to react completely with 43.9 mL of ascorbic acid solution (under acidic conditions). What is the concentration of the ascorbic acid ...

### Algebra

Solve the logarithmic equation. Be sure to reject any value of x that is not in the domain of the original logarithmic expression. ln ã(x+4)=1 What is the exact solution? Select the correct choice below and, if necessary, fill in the answer box to complete your choice. A. ...

### quant chemistry

A standard solution of Mn2+ was prepared by dissolving 0.250 g of Mn in 10 mL of concentrated HNO3 (measured with a graduated cylinder). The resulting solution was quantitatively transferred to a 100 mL volumetric flask and diluted to volume with distilled water. A 10 mL ...

### Material balance

A dilute salt solution containing 6% salt is fed to an evaporator at rate of 10000 kg/h for a trail run. crystals formed along with the saturated solution adhering with them are sent to a centrifuge for the recovery of the solution. 60% of the adhering solution is recovered. ...

### Chemistry

A 50.0 mL sample of 0.200 M AgNO3(aq) was allowed to react with an excess of NaCl(aq). The AgCl precipitate from the reaction was carefully dried and weighed. How many grams of precipitate should be obtained? I'm currently stuck and need help asap!!

### Chemistry

For each of the four pairs of compounds, which would you expect to have the higher melting point based on the operative bonding mechanism? NaCl and KBr HF and CF4 CF4 and CHI3 H2 and Br2 Pls try and help me :( xX

### chemistry

Using each of the following equations, calculate the number total of moles of products that can be obtained through decomposition of 1.75 moles of the reactant? a. 2 NH4NO3---> 2 N2 + O2 + 4 H2O b. 2 NaClO3---> 2 NACl + 3 O2 answers are 6.12 and 4.38 but i don't ...

### chemistry

50ml of water at 46.9 C were mixed with 50ml of water at 25.1 C in a calorimeter also at 25.1 C. The final temperature was 30.1 C Assuming that neither the density of water nor its specific heat capacity change with temperature, calculate the total heat capacity of the ...

### Math

Two acid solutions are to be mixed together. Solution A is 30% acid by volume. Solution B is 70% acid by volume. The 800 mL mixture is 54% acid by volume. The amount of Solution A, rounded to the nearest milliliter, is ____________mL.

### chemistry

To clean a clogged drain, 26 g of sodium hydroxide is added to water to make 150 mL of solution. What are the pH and pOH values for the solution?

### Chemistry

Calculate the equilibrium concentration of all ionic aqueous species in a solution containing 1.30 M HCl and 4.0 M C6H5OH (phenol, Ka=1.6 x 10^-10). What is the pH of the solution?

### chemistry

Calculate the molarity of a solution that is prepared by dissolving 23.35g of CaCl2 in a sufficient amount of water to make a 600 mL solution

### chemistry

Calculate the molarity of a solution that is prepared by dissolving 23.35g of CaCl2 in a sufficient amount of water to make a 600 mL solution.

### chemistry

A solution is made by dilution 400.mL of 2.0 M HCL to a final volume of 1000. mL. what is the pH of this solution? i'm stuck on this question i have no idea what to do, can anyone help? thanks:)

### chem

Explain the fact that acetic acid can be extracted quantitatively from ether solution by dilute aqueous sodium hydroxide solution.

### Chem

calculate pH of the buffer solution prepared by mixing 10 mL of 1.5 M HCl with 100 mL of 0.1 M K2CO3 solution. For H2CO3: Ka1= 4.46 e^-7, Ka2= 4.69e^-11

### Science

What is the molarity of a solution of sodium hydroxide, NaOH, if 23.64 mL of this solution is needed to neutralize 0.5632 g of potassium hydrogen phthalate (KNaP)?

### algebra

I need help with these problem someone told me that you was not helping them. Please help me!! 5/4x +1/8x=11/8 +x The solution is x= Solve by the elimination method. 4x +5y=5 8x +10y=10 What is the solution of the system.

### Chemistry

If 535 Ml of gaseous HCL, at 26.5 degrees Celsius and 747mm Hg, is dissolved in enough water to prepare 625 ml of solution, what is the PH of the solution?

### chemistry.

2.02g of KNO3 ( Mz=101) is dissolved in sufficient water to prepare 0,500 dm3 of solution. What is the concentration of this solution in mol dm?

### 9th grade

10 gm of silver nitrate solution is added to 10 gm of sodium chloride solution what change in mass do you expect after the reaction and why?

### 9th grade

10 gm of silver nitrate solution is added to 10 gm of sodium chloride solution what change in mass do you expect after the reaction and why?

### Chemistry

when dissolved in an aqeous solution, which of the following salts will yield an acidic solution? NH4Cl, NaClO4, Na2S, MgBr2, Ba(CH3CO2)2

### chemistry

to clean a clogged drain, 26 g of sodium hydroxide is added to water to make 150 ml of solution what are the pH and pOH values for the solution?

### Chemistry

Does the solid Zn(OH)2 dissolve when concentrated lye, NaOH solution, is added to a beaker containing a saturated solution of Zn (OH)2 and a small amount of Zn(OH)2?

### Chemistry

what is the molarity of a solution prepared by dissolving 222 g of sodium carbonate in enough water to make a solution volume of 3250 mL's?

### Chem

To obtain 12 g of sucrose (MM=342) from a solution labeled 8.0% C12H22O11 by mass, we would need to weigh out ______ of solution?

### chemistry

A 4.691 g sample of MgCl2 is dissolved in enough water to give 750. mL of solution. What is the magnesium ion concentration in this solution?

### chemistry HELP!

Solve an equilibrium problem (using an ICE table) to calculate the pH of each solution: a solution that is 0.170 M in HC2H3O2 and 0.105 M in KC2H3O2

### chemistry

What volume of 0.200 M silver nitrate solution (AgNO3) would have to be diluted to form 500mL of 0.050 M solution?

### Basic Chemistry

What is the molar concentration of Na+ in a solution prepared by dissolving 100.0g of Na3PO4 in sufficient H20 to form 2.00L of solution??

### science

A laboratory assistant prepared 1 liter of a 40% aqueous sodium Hydroxide solution. how many grams of NaOH were needed to make this solution?

### Chem7

Calculate the osmotic pressure (in torr) of a solution containing 17.15 mg of hemoglobin (molar mass 6.5 x 104 g/mol) in 12.8 mL of solution at 25 degrees C.

### chemistry

calculate the potential of silver electrode in a contact with the following a/ solution that is 0.0150M in I2 and saturated with AgI b/solution that is 0.0040 M in CN- and 0.0600M in Ag(CN)2^-

### maths

find the general solution of the following first order differential equation. t*(dy/dt) = (-y/t) + ((exp(1/t)/t^3) could you show steps in working to solution.

### AP CHEMISTRY

Sufficient strong acid is added to a solution containing Na2HPO4 to neutralize one-half of it. what will be the pH of this solution? Explain please

### AP CHEMISTRY

Sufficient strong acid is added to a solution containing Na2HPO4 to neutralize one-half of it. what will be the pH of this solution? Explain please

### Chemistry

25.0 ml of a 0.100 M solution of the weak acid, CH3OOH is titrated with a 0.10 M solution of the strong base, NaOH. Calculate the pH of the equivalence point.

### ChemB

A forming acid solution has a pH of 3.25. Which of these substances will raise the pH of the solution upon addition? Explain. A) HCl B) NaBr C) NaCHO2 D) KCl

### Chemistry

we used the solution NiSO4 6H20 - i have to find the mass of solute dissolved in a 25ml solution. - and the molar concentration.

### chemistry 1046

Calculate the solubility (in grams per 1.00 102 mL of solution) of magnesium hydroxide in a solution buffered at pH = 9 the ksp of Mg(oh)2 = 2.06e-13

### Chemistry

What volume of a 0.5 M solution is required to prepare 250 mL of a 0.15M solution? (Note: M = mole per Litre) Is 175ml correct?

### Chem 2

What is the molarity of a solution composed of 8.210g of Potassium Chromate (K2CrO4),dissolved in enough water to make .500 L of solution

### chemistry

Calculate the molarity of a solution made by dissolving 12.5 grams of Na2CrO4 in enough water to form exactly 550 mL of solution.

### chemistry

Calculate the molarity of a solution made by dissolving 12.5 grams of Na2CrO4 in enough water to form exactly 550 mL of solution.

### chemistry

Calculate the molarity of a solution made by dissolving 12.5 grams of Na2CrO4 in enough water to form exactly 550 mL of solution.

### Chemistry

What volume of a 0.22mol/L hydrochloric acid solution is needed to cause the pH of 25.00mL of a 0.15mol/L lithium hydroxide solution to have a pH that s equal to 7.00

### Chemistry

KClO3 dissociated in H20 should form a neutral solution. The results proved to be a slightly acidic solution with a pH of 6. What happened?

### Chemistry

Calculate the molarity of a solution made by dissolving 16.0 grams of Na2CrO4 in enough water to form exactly 555 mL of solution.

### Chemistry

A 8.5 x 10^-3 M solution of acetic acid is 4.6% ionized at 25 degree Celsius. in a 8.5 X 10^-4 M solution, the percentage of ionization would be? A.the same B.>4.6% C.<4.6% D.zero E.100%