a density of 1.0 M solution of NaCL

29,677 results, page 46

  1. Chemistry

    A 5.00-mL sample of a sulfuric acid solution of unknown concentration is titrated with a 0.1401 M Sodium Hydroxide solution. A volume of 5.99 mL of the base was required to reach the endpoint. What is the concentration of the unknown acid solution? Write the neutralization ...
  2. science chemistry

    Brandon prepares a potassium hydroxide solution (KOH) that he uses during a titration to determine the unknown concentration of a hydrochloric acid solution calculate the mass of potassium hydroxide that is need to prepare 250 cm^3 of a standard 0,125 mol.dm^-3 KOH solution.
  3. Physics

    The mass of Venus is 0.8140 times that of earth, and its radius is 0.950 times that of earth. Calculate the acceleration of gravity at the surface of Venus. Express your answer in g's (i.e. as a ratio to our acceleration of gravity). 9.01×10-1 is the correct ratio Calculate ...
  4. chemistry

    why is the formula written for an ionic compound such as NaCl the empirical formula,rather than a molecular formula?
  5. chemistry

    Hexane is a hydrocarbon (a molecule containing only carbon and hydrogen) with a molecular weight of 86.18 g/mol, a density of 0.660 g/mL, and a boiling point of 69C. Pentanol is an alcohol (a hydrocarbon with a "OH" group attached to one of its carbons) with a molecular weight...
  6. chemistry

    Hexane is a hydrocarbon (a molecule containing only carbon and hydrogen) with a molecular weight of 86.18 g/mol, a density of 0.660 g/mL, and a boiling point of 69C . Pentanol is an alcohol (a hydrocarbon with a "OH" group attached to one of its carbons) with a molecular ...
  7. Calculus

    Solve the following initial value problem and determine the interval where the solution exists. dy/dt = 2ty^2 y(0) = y_0 Textbook answer is: When y_0 <> 0, then y = 1/(1/y_0 - t^2). When y_0 = 0, then y = 0 When y_0 > 0, the interval where solution exists is |t| < ...
  8. Chemistry

    A 10.0 ml sample of vinegar which is an aqueous solution of acetic acid, requires 16.5ml of a 0.500M NaOH solution to reach the endpoint in a titration (where the moles of acid are equal to the moles of base). What is the molarity of the acetic acid solution?
  9. math

    you have an unlimited supply of 5% saline solution and 8% saline solution. How much of each type would you have to use to create 60 ounces of 7% saline solution? Write and solve a system of equations to model and solve this problem.
  10. math

    A chemist has 30%, 40 % and 80 % acid solutions. All three were to be mixed to make 4.00 x 102 L of 38% acid solution but a mistake was made and the amounts of 30% and 80 % were reversed. The result was 4.00 X 102 L of 65 % acid solution. What were the amounts of each solution...
  11. Chemistry

    Suppose 26.0g of sodium bromide is dissolved in 150mL of a 0.60M aqueous solution of silver nitrate. Calculate the final molarity of bromide anion in the solution. You can assume the volume of the solution doesn't change when the sodium bromide is dissolved in it.
  12. math/algebra

    Solve the polynomial inequality and graph the solution set on a real number line. Express the solution set in interval notation x^3+x^2+16x+16>0 What is the solution set? (Type your answer in interval notation.) shannon
  13. Math (Algebra)

    A chemistry student needs to make 60 liters of a 30% alcohol solution. He has a 20% alcohol solution and a 40% alcohol solution in the lab. How many liters of each strength does he need to mix together *The system of equations I did was: a+b=60 & .2a+.4b=18. I may be wrong but...
  14. Chemistry

    What are the molar heat capacities of: H2O(l) NaCl and Tungsten? I got 75.32 J/K*mol 50 J/K*mol 24.8 J/K*mol
  15. Chemistry

    WOULD THE VOLUME OF A 0.10M NAOH SOLUTION NEEDED TO TITRATE25.0ML OF A 0.10M HNO2 ( A WEAK ACID)SOLUTION BE DIFFERENT FROMTHAT NEEDED TO TITRATE 25.0ML OF A 0.10M HCL (A STRONGACID)SOLUTION?
  16. math

    A 12 qrt. cooling system is checked and found to be filled with a solution that is 40 % antifreeze. The desired strength of the solution is 60% antifreeze. how many quarts of solution need to be drained and replaced with pure antifreeze to reach the desired strength.
  17. Algebra

    Solve the polynomial inequality and graph the solution set on a real number line. Express the solution set in interval notation x^3+x^2+16x+16>0 What is the solution set? (Type your answer in interval notation.) qaz
  18. algebra

    Solve the polynomial inequality and graph the solution set on a real number line. Express the solution set in interval notation x^3+x^2+16x+16>0 What is the solution set? (Type your answer in interval notation.) Mike
  19. Chemistry

    References Chapter 17: EOC Assume you dissolve 0.178 g of the weak acid benzoic acid, , in enough water to make mL of solution and then titrate the solution with 0.187 M . ( for benzoic acid = .) What was the pH of the original benzoic acid solution?
  20. Chemistry

    Redox titrations are used to determine the amounts of oxidizing and reducing agents in solution. For example, a solution of hydrogen peroxide,H2O2, can be titrated against a solution of potassium permanganate, KMnO4. The following equation represents the reaction: 2KMnO4(aq)+...
  21. chemistry

    A 10.0-mL sample of vinegar, which is an aqueous solution of acetic acid, CH3COOH, requires 16.5 XML of a 0.500M NaOH solution to reach the endpoint in a titration (where the moles of acid are equal to the moles of base). What is the molarity of the acetic acid solution
  22. Chemistry

    Calculate [CO32- ] in a 0.019 M solution of CO2 in water (H2CO3). If all the CO32- in this solution comes from the reaction shown below, what percentage of the H+ ions in the solution is a result of the dissociation of HCO3‾? HCO3‾(aq) H+(aq) + CO32-(aq)
  23. chemistry

    Suppose 0.432g of zinc acetate is dissolved in 200.mL of a 16.0mM aqueous solution of ammonium sulfate. Calculate the final molarity of acetate anion in the solution. You can assume the volume of the solution doesn't change when the zinc acetate is dissolved in it.
  24. Chemistry

    You have a solution of 0.15M Ba(OH)2 and a solution of H2SO4 whose concentration you want to determine. You start with 25 ml H2SO4 in the Erlenmeyer and titrate in the Ba(OH)2. At the end of the titration, you find that you have used 20.4 ml Ba(OH)2 and an additional 2.2 ml ...
  25. physics

    Bird bones have air pockets in them to reduce their weight–this also gives them an average density significantly less than that of the bones of other animals. Suppose an ornithologist weighs a bird bone in air and in water and finds its mass is 43.0 g and its apparent mass ...
  26. Chemistry

    A solution contains 1.694 mg of CoSO4 (MW 155.0) per mL. Calculate a) The volume of 0.008640 M EDTA needed to titrate a 25.00 ml aliquot of this solution. Step 1. 0.001694g * 25ml * 1/155 g/mol= 0.0002732 mol Step 2. Volume of EDTA needed = 0.0002732 mol/ 0.008640 M = 0.03125 ...
  27. College Chemistry

    1) A 25mL sample of the .265M HCI solution from the previous question is titrated with a solution of NaOH. 28.25mL of the NaOH solution is required to titrate the HCl. Calculate the molarity of the NaOH solution. 2) A 1.12g sample of an unknown monoprotic acid is titrated with...
  28. Chemistry Lab

    A student who is performing this experiment pours an 8.50mL sample of saturated borax solution into a 10mL graduated cylinder after the borax has cooled to a certain temperature, T. The student rinses the sample into a small beaker using distilled water, and then titrates the ...
  29. Chemistry

    Please help me with these! Thanks :) Describe, in detail, how to make 5.5 liters of a 2.5 molar HCl solution from a 10.5 molar HCl stock solution. How many grams of a stock solution that is 85.5 percent H2SO4 by mass would be needed to make 150 grams of a 45.0 percent by mass ...
  30. Chemistry

    A 25cm aliquot of ammonium iron 2 tetraoxomanganate 7 containing 39.2g of its salt in 250cm solution, needed 25cm of potassium tetraoxomanganate 7 solution for a colour change to occur. What is the concentration of the potassium tetraoxomanganate 7 solution?
  31. physics

    the density of a cube is measured by it's mass and length of it's side if the maximum error in the measurement of mass and length are 3% and 2% respectively. the maximum error in the measurement of density of cube is?
  32. Chemistry

    I saw that article on Google - that is actually how I got the idea to sublimate the naphthalene. But thank you for the suggestion! It makes me feel much more confident to know that I am on the right track! Thank you! We have a lab where we have to separate five components. The...
  33. chemistry

    Suppose of copper (II) nitrate is dissolved in of a aqueous solution of sodium chromate. Calculate the final molarity of nitrate anion in the solution. You can assume the volume of the solution doesn't change when the copper (II) nitrate is dissolved in it. Round your answer ...
  34. chemistry

    1) Aqueous solutions of potassium sulfate and ammonium nitrate are mixed together. Which statement is correct? A) Both KNO3 and NH4SO4 precipitate from solution B) A gas is released C) NH4SO4 will precipitate from solution D) KNO3 will precipitate from solution E) No reaction ...
  35. math

    At the end of Summer, Puss discovers that his radiator antifreeze solution has dropped below the safe level. If the radiator contains 4 gallons of a 25% antifreeze solution, how many gallons of pure antifreeze must he add to bring it up to a desired 50% solution? is the answer...
  36. math

    Solve the system by graphing. Then classify the system.? 6x-y=50 6x+7y=-14 What is the solution of the system? (type an ordered pair. Type N if there is no solution. Type R if the solution is all real numbers)
  37. chemistry

    How would I make 500 ml's of a .35M NaCI solution. MW= 58.44 ( I know how to do the first part) How many micromoles of NaCI would be present in that solution? What would be the percentage of NaCI in that solution?
  38. Chemistry

    the lead (II) nitrate in 25.49 ml of a 0.1338M solution reacts with all of the aluminum sulfate in 25.00 ml solution. What is the molar concentration of the aluminum sulfate in the original aluminum sulfate solution?
  39. Physics

    Why do your vowels examples ("aaah", "eee", "uhh") sound different then when I make them? Explain. Tension, mass density and the length of our vocal cords differ so would that be the reason why they sound different? For instance: a child's voice is usually higher pitched than ...
  40. Chemistry

    A solution of hydrogen peroxide, H2O2, is titrated with potassium permanganate, KMnO4, according to the following equation: 5H2O2 + 2KMnO4 + 3H2SO4 = 5O2 + 2MnSO4 + 8H2O + K2SO4. It requires 46.0 mL of 0.145 Mol/L KMnO4 to titrate 50.0 mL of the solution of H2O2. What is the ...
  41. Chemistry

    A solution of hydrogen peroxide, H2O2, is titrated with potassium permanganate, KMnO4, according to the following equation: 5H2O2 + 2KMnO4 + 3H2SO4 = 5O2 + 2MnSO4 + 8H2O + K2SO4. It requires 46.0 mL of 0.145 Mol/L KMnO4 to titrate 50.0 mL of the solution of H2O2. What is the ...
  42. chemistry

    A solution is prepared by dissolving 20.2 {\rm mL} of methanol ({\rm{CH}}_3 {\rm{OH}}) in 100.0 {\rm mL} of water at 25 ^\circ {\rm C}. The final volume of the solution is 118 {\rm mL}. The densities of methanol and water at this temperature are 0.782 {\rm g/mL} and 1.00 {\rm ...
  43. physic

    a wooden block of density 860 kg per metre cube at zero degree celsius is floating on benzene liquid of density 900 kg per metre cube at zero degree celsius the temperature at which the block just submerge in Benzene is
  44. science

    For the following crystals, explain how their melting points are related to the bonding forces and the crystal structure. a)Copper,Cu b)Water,H20 c)Sodium chloride,NaCl d)Diamond,C (Broken Link Removed)
  45. Chemistry

    if NaCl is added to this equation: [Co(OH2)6]2+ + 4 Cl- + heat ->(supposed to be double arrow) [CoCl4]2- + 6 H2O would the equilibrium shift right or left? also same question for the addition of AgNO3.
  46. chemistry urgent!

    what is the net ionic for these following balanced equations: 2(NH4)3PO4(aq) + 3Ba(OH)2(aq) -> Ba(PO4)2(s) + 6H2O(l) + 6NH3(g) 2HNO3(aq) + K2CO3(aq) -> H2O(l) + CO2(g) +2KNO3 NaF(aq) + HCl(aq) -> NaCl(aq) + HF(aq)
  47. chemistry

    This soidum hydroxide solution was then used to determine the amount of acetic acid in vinegar. Three titrations of the sodium hydroxide solution against exactly 5mL of vinegar using phenolphthalein indicator required 22.85Ml, 22.67mL and 22.93mL of the sodium hydroxide ...
  48. Chemistry

    i. Which of the following solutions has the lowest pH (more acidic). Explain you answers. a. a 0.1 M solution of a strong acid or a 0.1 M solution of a weak acid. b. a 0.1 M solution of an acid with Ka=2×10-3 or one with Ka=8×10-6 c. a 0.1 M solutions of a base with pKb=4.5 ...
  49. Chemistry

    i. Which of the following solutions has the lowest pH (more acidic). Explain you answers. a. a 0.1 M solution of a strong acid or a 0.1 M solution of a weak acid. b. a 0.1 M solution of an acid with Ka=2×10-3 or one with Ka=8×10-6 c. a 0.1 M solutions of a base with pKb=4.5 ...
  50. Chemistry

    i. Which of the following solutions has the lowest pH (more acidic). Explain you answers. a. a 0.1 M solution of a strong acid or a 0.1 M solution of a weak acid. b. a 0.1 M solution of an acid with Ka=2×10-3 or one with Ka=8×10-6 c. a 0.1 M solutions of a base with pKb=4.5 ...
  51. Math

    One solution contains 25% as much water as alcohol and another solution contains 5 times as much water as alcohol. How many gallons of each solution must be mixed in order to obtain 7 gallons of the new solution which contains as much water as alcohol? Please help. I don't ...
  52. chemistry

    In the following questions, assume that no excess distilled water was added from a wash bottle during the titration of 10.00 mL of vinegar with your standardized solution of NaOH. A. calculate the pH of vinegar. B. what was the pH of the solution after 4.00 mL of titrant was ...
  53. chemistry help

    In the following questions, assume that no excess distilled water was added from a wash bottle during the titration of 10.00 mL of vinegar with your standardized solution of NaOH. A. calculate the pH of vinegar. B. what was the pH of the solution after 4.00 mL of titrant was ...
  54. Chemistry

    Aspirin tablet, mass of tablet= 0.4149 g concentration of iron III salicylate complex = 3.997E-4, What is the concentration of ASA in the original solution? What is the mass of ASA in the original solution? The procedure was as follows: accurately weigh by difference a tablet ...
  55. chemistry

    Aspirin tablet, mass of tablet= 0.4149 g concentration of iron III salicylate complex = 3.997E-4, What is the concentration of ASA in the original solution? What is the mass of ASA in the original solution? The procedure was as follows: accurately weigh by difference a tablet ...
  56. chemistry

    Aspirin tablet, mass of tablet= 0.4149 g concentration of iron III salicylate complex = 3.997E-4, What is the concentration of ASA in the original solution? What is the mass of ASA in the original solution? The procedure was as follows: accurately weigh by difference a tablet ...
  57. chemistry

    If 0.5 moles of bacl2 is mixed with 0.2 moles na3po4 then maximum no.of moles of nacl formed is?
  58. Math

    A 30% solution of fertilizer is to be mixed with a 60% solution of fertilizer in order to get 150 gallons of 50% solution. How many gallons of the 30% and the 60% solutions should be mixed. I really need help.
  59. Math

    A chemist wants to create a solution that is 24% acid. How many liters of 40% acid solution must be added to 50 liters of an 18% acid solution to obtain this 24% acid mixture? Please help thank you
  60. Chemistry

    So this is a three part question. I solved the first part correctly but I need help with the second and third. Q: The dissociation equilibrium constants for the protonated form of of alanine (a diprotic amino acid, H2X+)are Ka1 = 4.6 x 10^-3 and Ka2 = 2.0 x 10^-10. Assume that...
  61. chemistry

    For which of the following will delta S be the most positve? A) Co2(g)->CO2(s) B) C6H12O6 (s)+ 6 O2(g) -> 6 Co2(g) + 6H20(g) C) Na(aq) + Cl (aq)-> NaCl (s) D) Cl2(g) + H2(g) -> 2HCl(g) E) H(aq) + OH(aq) -> H20 (l)
  62. Chemistry II

    If 15.0 mL of 1.2e-4 mol/L HI is added to 26.0 mL of 9.2e-4 mol/L HI, what is the pH of the solution? M x L = mols. Calculate mols for solution 1, do the same for solution 2, add mols together and divide by total liters. That will be the new molarity. Then pH = -log(Molarity)
  63. algebra

    Using the equation below as a model, fill in numbers in the place of a and b to create a rational equation that has an extraneous solution. x+a/ax=b/x Part 1. Show all work to solve for x in the equation and check the solution. Part 2. Explain how to identify the extraneous ...
  64. Science

    The density of the sun's core is about 160 g/cm. The density of the earth's core is about 13.0 g/cm. About how many times denser is the sun's core than Earth's?
  65. P. Chemistry

    A student added solid K2O to a 750.0 mL volumetric flask. The solid was dissolved in water and then the flask filled with water to the mark. This formed 750.0 mL of the initial KOH solution. 20.0 mL of the initial solution was transferred to another flask and diluted to 200.0 ...
  66. chemistry

    what ionic compounds could you form from the following? Sodium Calcium Neon Phosphorus Chlorine i have NaCl, CaCl2, Na3P, and Ca3P2 is that all and can neon be used?
  67. Chem

    NaOH + HCl --> NaCl + H2O What is the amount of heat absorbed by water? given: mass: 102.2 grams specific heat: .9601 cal/g degrees C
  68. Chemistry

    What mass of sodium chloride is produced when chlorine gas reacts with 0.29 grams of sodium iodide? Unbalanced equation is given below: NaI + Cl2 -> NaCl + I2
  69. chemistry (molecular calculations)

    If you had 106.35 grams of Cl, how much Na would be required to convert i all to NaCl. I worked this problem and got 41.83 grams of Na, but I'm not sure if this is correct.
  70. Chemistry

    Alicia's cheapskate boyfriend gave her a ring he claims is 24 carat gold. Alicia is skeptical. After chem class the next day she measures the mass of the ring, finds the volume of the ring by water displacement, and then calculates the density of the ring. should she treasure ...
  71. Chemistry

    Hexane is a hydrocarbon (a molecule containing only carbon and hydrogen) with a molecular weight of 86.18 g/mol, a density of 0.660 g/mL, and a boiling point of 69C. Pentanol is an alcohol (a hydrocarbon with a "OH" group attached to one of its carbons) with a molecular weight...
  72. physics

    The density of ice is 917 kg/m3, and the density of sea water is 1025 kg/m3. As shown is the figure, a polar bear climbs onto a piece of ice, which has a volume of 5.75 m3, and is floating in sea water. a) What is the mass of the piece of ice? b) What is the mass of the ...
  73. Help Chemistry

    Can you please tell me if these are right? Determine the pH for the following solutions A [OH-] = 1.0 X 10^-7 M I got 7 B. [H3O+ = 4.2 X 10 ^-3M I got 2.4 C. [H3O+]= 0.0001M I got 4 D. [OH-] = 8.5 X10^-9M I got 5.9 What are the [H3O+] and [OH-] for a solution with the ...
  74. Physical Science 8th grade

    A balloon filled with air does not rise as a balloon filled with helium. What does this tell you about the density of helium? A. Helium is more dense than air B. Helium is less dense than air C. The two gases have the same density D. When heated, helium becomes more dense
  75. chemistry

    The reaction between sodium hydroxide and hydrobromic acid is represented in the equation below: OH- + H+ -> H2O A 62.5 mL sample of 1.86 M NaOH at 22.5 deg Celsius was mixed with 62.5 mL sample of 1.86 M of HBr at 22.5 deg Celsius in a coffee cup calorimeter. The ...
  76. Chemistry

    What is the concentration of a solution of lithium carbonate containing 0.01 mol in 750 mL of solution What volume of 0.01 mol L-1 Li2CO3 solution would contain 0.035 mol lithium carbonate? Give your answer as 2 sig fig (this is technically not correct), followed by a space ...
  77. Chemistry

    A stock solution was prepared by dissolving exactly 0.4000 g of pure ASA (180.16g/mol) in 10.00 mL of NaOH and heating the solution to a gentle boil. After cooling to room temperature, the solution was poured into a 250 ml volumetric flask and diluted to the mark with DI water...
  78. chemistry

    In a volumetric analysis experiment, a solution of sodium oxalate (Na2C2O4) n acidic solution is titrated with a solution of potassium permanganate (KMnO4) according to the following balanced chemical equation: 2KMnO4(aq)+8H2SO4(aq)+5Na2C2O4(aq)-> 2MnSO4(aq)+8H2O(l)+CO(g)=...
  79. calculus

    A dam 15 m high holds the water in reservoir . For safety reasons , the water level is maintained at a height 3 m below the top of the dam. At best of the dam , engineers have installed a vertical door in the shape of an equilateral triangle with sides of length 3 m , ...
  80. GENERAL CHEMISTRY CALCULATION

    preparing working solution of the disinfectant Osyl from the stock solution requires diluting the stock one part Osyl to five parts water .this is V/V solution .in this situation you have 250ml of water so the question is:HOW MUCH OSYL IS NEEDED?
  81. chemistry

    When 40.0 mL of 1.00 M H2SO4 is added to 80.0 mL of 1.00 M NaOH at 20.00°C in a coffee cup calorimeter, the temperature of the aqueous solution increases to 29.20°C. If the mass of the solution is 120.0 g and the specific heat of the calorimeter and solution is 4.184 J/g...
  82. chemistry

    a 2.00g sample of zinc metal is added to a calorimeter containing 150g of nitric acid solution initially at 20.0 degrees celsius . The temperature of the solution increased to 28.0 degrees celsius . Calculate the delta H of the reaction assuming that the specific heat capacity...
  83. Chemistry

    What is the molar heat of reaction? When 0.732 g of Ca metal is added to 200.0 mL of 0.500 M HCl(aq), a temperature increase of 119C is observed. Assume the solution's final volume is 200.0 mL, the density is 1.00 g/mL, and the heat capacity is 4.184 J/gC. (Note: Pay attention...
  84. Chem

    Do my answers look correct for these? Thanks Calculate the mass percent of a solution containing 45.6 grams ethanol (C2H6O) in 245 grams of water. 15.7% You are asked to make 500.0 mL of a 4.5M solution of HCl, but the only HCl you have available to dilute is 18.0M. Describe ...
  85. chemistry

    A student investigating the properties of solutions containing carbonate ions prepared a solution containing 7.493 g Na2CO3 in a flask of volume 250 mL. Some of the solution was transferred to a buret. What volume of solution should be dispensed from the bret to provide 8.455 ...
  86. chemistry

    Glutamate (Glu–) is the conjugate base form of glutamic acid (HGlu). The Ka of glutamic acid is 5.012 x 10^–5. You titrate 50 mL of 0.10 M sodium glutamate solution with 0.05 M HCl solution. Calculate the pH of the solution at the equivalence point. Ive been trying to ...
  87. CHEMISTRY

    HOW YOU PREPARE 30.0ML OF 0.800M HNO3 FROM A STOCK SOLUTION OF 4.OOM HNO3? WHAT SOLUTION IN ML OF THE 4.OOM HNO3 SOLUTION WILL YOU NEED?
  88. pharmacy tech.

    a pharmacist has a 40% acid solution and has a 25% acid solution. How many liters must be mixed to form 54 liters of a 27 % acid solution?
  89. math

    A pharmacist mixes 14 ounces of 68% saline solution with 55% saline solution. If the final mixture is 62% saline, how many ounces of the 55% solution were used?
  90. basic algebra

    Boris has 10 ounces of a 10% acid solution. How many ounces of 25% acid solution should he add to make a solution that is 20% acid? Thank you.
  91. Math

    A custodian pours1/8 gallon of cleaning solution into each pail of water that she uses. how many pails of water and cleaning solution can the custodian make using 16 gallons of cleaning solution?
  92. Chem help!!

    A rock salt (NaCl), ice, and water mixutre is used to make homemade ice cream. How many grams of rock salt must be added to lower the freezing point 10.0 degrees C? I have no idea what to do, please help! delta T = Kf*i*m delta T = 10. Kf is the molal freezing point constant, ...
  93. Chemistry

    Calculate the molar concentration for each of the following. a)The concentration of a brine solution containing 225 g for pure sodium chloride dissolved in 4.00 L of solution. b)The volume that must be added to 4.2 mol of magnesium chloride to make a 0.045 M solution. c)The ...
  94. science

    1. Which of the following is a reason why a person might want to wear snowshoes if walking a distance in deep snow? (1 point) snowshoes spread the person’s weight out snowshoes reduce the amount of pressure on a given spot snowshoes keep the person from sinking in the snow ...
  95. Physics

    In the rough approximation that the density of the Earth is uniform throughout its interior, the gravitational field strength (force per unit mass) inside the Earth at a distance r from the center is gr/R, where R is the radius of the Earth. (In actual fact, the outer layers ...
  96. Chemistry

    Hi, I'm really having trouble this this chemistry problem. I have the answers; however I don't have extensive knowledge about titrations and I'm struggling with working it out. If anyone could suggest how to work this out (or even where to start) that would be great. Thanks! ...
  97. Physics ( using earth to find pressure of planet y

    3. A model of Earth’s interior: Look up the radius and mass of the Earth. Radius is 6,371 km Mass is 5.974 x 10^24 kg Calculate its average density. p_e = (5.974 x 10^24 kg)/ (4/3)pi r^3 = (5.974 x 10^24 kg)/ (4/3)pi (6371)^3 = 5.54 g/cm^3 Imagine a planet of the same radius...
  98. chemistry

    consider a random mixture of two particles,diamond and SiC.Assume all particles are spherical with a radius of 0.100mm. The mixture is 80.0 wt% diamond(density=3.51 g/ml) and 20.0 wt% SiC (density=3.23 g/ml) a)Calculate the mass of a single particle diamond and the number of ...
  99. English

    1. Do-it-yourself fashion can be your solution. 2. Do-It-Yourself fashion can be your solution. 3. Diy fashion can be your solution. 4. DIY fashion can be your solution. ================================== Which one is correctly spelled?
  100. Chemistry

    Consider the densities of the liquid substances listed. a) How will substance X, a solid, with density of 0.87 g/cm^3, behave when placed in each of the other pure liquids? b) Sketch and label a test tube containing substances A,B,C, and X. Assume that the liquids do not mix ...
  1. Pages:
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. 6
  8. 7
  9. 8
  10. 9
  11. 10
  12. 11
  13. 12
  14. 13
  15. 14
  16. 15
  17. 16
  18. 17
  19. 18
  20. 19
  21. 20
  22. 21
  23. 22
  24. 23
  25. 24
  26. 25
  27. 26
  28. 27
  29. 28
  30. 29
  31. 30
  32. 31
  33. 32
  34. 33
  35. 34
  36. 35
  37. 36
  38. 37
  39. 38
  40. 39
  41. 40
  42. 41
  43. 42
  44. 43
  45. 44
  46. 45
  47. 46
  48. 47
  49. 48
  50. 49
  51. 50
  52. 51
  53. 52
  54. 53
  55. 54
  56. 55
  57. 56
  58. 57
  59. 58
  60. 59
  61. 60
  62. 61
  63. 62
  64. 63
  65. 64
  66. 65
  67. 66
  68. 67
  69. 68
  70. 69
  71. 70
  72. 71
  73. 72
  74. 73
  75. 74
  76. 75
  77. 76
  78. 77
  79. 78
  80. 79
  81. 80
  82. 81
  83. 82
  84. 83
  85. 84
  86. 85
  87. 86
  88. 87
  89. 88
  90. 89
  91. 90
  92. 91
  93. 92
  94. 93
  95. 94
  96. 95
  97. 96
  98. 97
  99. 98
  100. 99
  101. 100