# a density of 1.0 M solution of NaCL

29,400 results, page 45

### statistics

A researcher finds that two continuous, random variables of interest, X and Y, have a joint probability density function (pdf) given by: f(x,y)={cxy 0<=x<=1,0<=y<=1,x+y=>1, .........0 otherwise where c is a constant. (i) Find the value of c so that f(x,y) ...

### math show work please

1-11/x+30/x^2=0 A.the solution set is ? B.The solution set is the set of real numbers or C. the solution set is an empty set

### Chemistry

Two of the questions my teacher put on the review sheet for our Acid/Base test are 1) what is the characteristic property of a buffer solution? and 2) what does a buffer solution contain? i think a buffer solution contains a weak acid and its conjugate base or a weak base and ...

### physics

Lubricating oil, with a relative density of 0.79, flows around a 90¨¬ bend. The pipe diameter is 0.45m, and the oil has a pressure head of 7m and the flow is 1.7m3/s. Find the force exerted by the oil on the bend. Oil density = 0.79 X 103 Volumetric mass flow rate = 1.7 m3/s...

### Physics

The density of copper is 9.8 kilograms per meter cube and the density of gold is 1.9 kilograms per meter cube. When two wires of these metals are held under the same tension, the wave speed in the gold is found to be half that in the copper wire. What is the ratio of the ...

### math

A 9 percent salt-water solution is mixed with 4 ounces of an 18 percent salt-water solution in order to obtain a 15 percent salt-water solution. How much of the first solution should be used? 1 ounce 2 ounces 3 ounces 4 ounces Explain your answer.

### programming

– Define a structure called Object which includes three doubles specifying the object’s mass, volume and density. – Create an array of 10 Objects. – Define the function void scanobjectsdata(struct Object objects[], int size) that scans from the input and updates the ...

### chem

A sample of 7.80L of NH3 (ammonia) gas at 22 degrees and 735mmHg is bubbled into a 0.350L solution of 0.400M HCL(hydrochloric acid). The Kb value for NH3 is 1.8x10-5 Assuming all the NH3 dissolves and that the volume of the solution remains at 0.350L , calculate the pH of the ...

### chem

A sample of 7.80L of NH3 (ammonia) gas at 22 degrees and 735mmHg is bubbled into a 0.350L solution of 0.400M HCL(hydrochloric acid). The Kb value for NH3 is 1.8x10-5 Assuming all the NH3 dissolves and that the volume of the solution remains at 0.350L , calculate the pH of the ...

### Chemistry

Which solution is more concentrated? a) 1.0L of 1.0M aqueous solution, or b) 1.0L of 1.0m aqueous solution

### physics

How much absolute (total) pressure must a submarine withstand at a depth of 120m in the lake. Give answer in kPa. (Use 10m/s^2 for g). h=120m p_water = 1 g/cm^3 = 1000 kg/m^3 p_atmosphere = 101.3kPa P_total = ? P_water =density *g*h =1000*10*120 =1200000Pa =1200kPa P_total =...

### physics

How much absolute (total) pressure must a submarine withstand at a depth of 120m in the lake. Give answer in kPa. (Use 10m/s^2 for g). h=120m p_water = 1 g/cm^3 = 1000 kg/m^3 p_atmosphere = 101.3kPa P_total = ? P_water =density *g*h =1000*10*120 =1200000Pa =1200kPa P_total =...

### Science

Describe how you can find the relative desities o 4 different liquids. You can let one float on the others, if they are not miscible. The less dense will be on top of the heavier dense. See experiment 2 on this site: http://www.hometrainingtools.com/articles/liquid-density-...

### Chemistry

Hg + Br2 -> HgBr2 1. What mass of HgBr2 can be produced from the reaction of 10.0 g Hg and 9.00 g Br2? What mass of which reagent is left unreacted? 2. What mass of HgBr2 can be produced from the reaction of 5.00 mL mercury (density = 13.6 g/mL) and 5.00 mL bromine (density...

### science

an empty density bottle weighs 25 gram. when completely filled with water, it weighs 55 gram and when completely filled with a liquid, it weighs 52 gram. calculate volume and density of the bottle.

### Chemistry

When 0.655 g of Ca metal is added to 200.0 mL of 0.500 M HCl(aq), a temperature increase of 107C is observed. Assume the solution's final volume is 200.0 mL, the density is 1.00 g/mL, and the heat capacity is 4.184 J/gC. (Note: Pay attention to significant figures. Do not ...

### Chemistry

A solution of calcium nitrate, Ca(NO3)2, reacts with a solution of ammonium fluoride, NH4F, to form solid calcium fluoride, CaF2, and ammonium nitrate, NH4NO3(aq). When 45.00 mL of 4.8724 x 10-1 M Ca(NO3)2 solution was added to 60.00 mL of 9.9981 x 10-1 M NH4F solution, 1.524 ...

### Math

Solution A is 80% Alcohol and Solution B is 30% Alcohol. How many Liters of each Solutions should be mixed in order to make 200 liters of a Solution that is 62% Alcohol ?

### chemistry

What is the molarity of the resultant MgCl2 solution formed by mixing 100 cm3 of 0.5 M MgCl2 solution and 150 cm3 of 0.9M MgCl2 solution?

### BioChemisty

You have a 0.5 M HEPES pH 7, and a 0.5 M HEPES pH 8 solution. How much of each stock solution do you need to make 125mL of a 50 mM HEPES pH 7.5 solution? How much water?

### Math

How many ounces of 1% antifreeze solution must be added to 100 ounces of 40% antifreeze solution to obtain a 16% antifreeze solution? how do I set this equation up?

### physics

A rod with a length L = 0.385 m and a nonuniform linear mass density rests along the y axis with one end at the origin. If the linear mass density of the rod is given by λ = (5.00 ✕ 10−2 kg/m) + (1.50 ✕ 10−2 kg/m2)y then a) what is the total mass...

### chemistry

Which of the following is best described as an acid-base reaction? 1. NaCl + AgNO3 !NaNO3 + AgCl 2. Ca + 2H2O ! Ca(OH)2 + H2 3. 2HgO ! 2 Hg + O2 4. KCl + NH4NO3 ! KNO3 + NH4Cl 5. NH3 + H2O ! NH+ 4 + OH−

### Physics

A square pool with 180-m-long sides is created in a concrete parking lot. The walls are concrete 52.9 cm thick and have a density of 2.50 g/cm3. The coefficient of static friction between the walls and the parking lot is 0.515. What is the maximum possible depth of the pool? I...

### chemistry

A 893 g sample of a solution of the solute (CH3)2CO in the solvent C4H8O that has a concentration of 28.6 pph(parts per hundred) by mass (CH3)2CO is available. Calculate the amount (g) of acetone that is present in the sample. Molar Mass (g/mol) (CH3)2CO 58.05 C4H8O 72.12 ...

### Chemistry

Help me set them up and then check my answers? Round your answer to the correct number of significant digits and show work. 1. How many grams of NaI would be used to produce a 2.0 M solution with a volume of 10.00 L? 2. What is the molarity of a 2.50 x 102 cm3 solution ...

### Chemistry;HELP

Help me set them up and then check my answers? Round your answer to the correct number of significant digits and show work. 1. How many grams of NaI would be used to produce a 2.0 M solution with a volume of 10.00 L? 2. What is the molarity of a 2.50 x 102 cm3 solution ...

### AlphaPlus

A student is asked to dilute a 4.85 mol/L stock solution in order to obtain 7.00 L of 1.25 mol/L solution. WHat volume of the stock solution should the student start with?

### Chemistry

You are supposed to mix 250 mL of a 0.1 M solution of Pb(NO3)2 solution. You would need to mix ______ g of Pb(NO3)2 with enough water to make 250 mL of solution.

### Business comunication

Which of the following is most likely to persuade the reader ? a.Describe your reader's solution first, explain why it won't work,and then go on to describe your own solution. b.Ignore your opponent's solution and just concentrate on your own. c.Describe your own solution ...

### Chemistry

You make 1.00 L of a buffered solution (pH = 5.10) by mixing propanoic acid and potassium propanoate. You have 1.00 M solutions of each component of the buffered solution. What volume of each solution do you mix to make such a buffered solution? propanoic acid potassium ...

### science

i need help with a packet that im struggling with my questions are write the total number of atoms present for the following questions: a. 4SO2 now i tried and got 8O'S and 1S b. 8O2 i tried and got 16 all together c. 3Al2(SO4)3 i tried and got 6Al, 3S, and 12O my next ...

### biology

1. Which statement is TRUE? a. A cell placed in an isotomic solution will swell. b. A cell placed in a hypotonic solution will swell. c. A cell placed in a hypotonic solution will shrink. d. A cell placed in a hypertonic soluction will remain the same size. e. A cell placed in...

### chemistry

A student measures 0.2452 g of a monoprotic solid acid, and dissolves the solid in water to make 100.0 mL of solution. the entire solution is titrated to a phenolphthalein endpoint with 45.06mL of 0.1725M KOH. A. what is the molarity of the acid solution? B. what is the molar ...

### math

Solve the system of equations by graphing. Then classify the system? y= -x -11 4x -3y=-2 What is the solution of the system? (Type an ordered pair. Type N if there is no solution. Type R if the solution is all real numbers.)

### math

Solve the system of equations by graphing. Then Classify the system? 4u+v=1 4u=v+7 What is the solution of the system? (Type an ordered pair. Type N if there is no solution. Type R if the solution is all real numbers.)

### chemistry

A chemist dissolves 0.097 g of CuSO4 · 5 H2O in water and dilutes the solution to the mark in a 500-mL volumetric flask. A 13.6-mL sample of this solution is then transferred to a second 500-mL volumetric flask and diluted. What is the molarity of CuSO4 in the second solution...

### Chemistry - percipitates

10g of AgI is dissolved in 100cm3 of water and Na2SO4(s) is added to the solution with the ppt.After about 10mins.25cm3 of the solution is taken and added Cl2 and heated.The remains Cl2 is removed and a small amount of KI(s) is added and then the solution is titrated with 0.02...

### Chemistry

When 35.0 mL of 1.43 M NaOH at 22.0 degres Celsius is neutralized by 35.0 mL of HCL also at 22.0 degrees Celsius in a coffee-cup calorimeter, the temperature of the final solution rises to 31.29 degrees Celsius. Assume that the specific heat of all solutions i 4.18 J/ g* C, ...

### Chemistry

A hot air balloon is filled with hot air and the hot air forces the volume of the balloon to expand until the density of the gas in the balloon is less than the density of the outside air. The volume must be 20% larger than the balloon would be at STP in order for the balloon ...

### chemistry

A hot air balloon is filled with hot air and the hot air forces the volume of the balloon to expand until the density of the gas in the balloon is less than the density of the outside air. The volume must be 20% larger than the balloon would be at STP in order for the balloon ...

### Circuits and electronics applications3

We are working on finding the particular solution for the first-order linear constant-coefficient ordinary differential equation: RCdvP(t)dt+vP(t)=Vicos(ωt) The new idea is to find the particular solution for the related equation RCdvPS(t)dt+vPS(t)=Viest because we expect ...

### Chemistry

A 2.80-g sample of haematite ore containing Fe3+ ions was dissolved in a concentrated acid and the solution was diluted to 250 mL. A 25.0 mL aliquot was reduced with Sn2+ to form a solution of Fe2+ ions. This solution of Fe2+ ions required26.4mL of a 0.0200 M K2Cr2O7 solution ...

### Chem

A concentrated solution of ammonia is added to a solution of zinc oxide? NH3 + ZnI2 => ?? An excess of nitric acid solution is added to a solution of tetraaminecopper (II) sulfate. HNO3 + ? => ?? Zn forms the Zn(NH3)4^+2 ion. It MAY form some Zn(OH)2 at small amounts of ...

### m116

How do you know if a value is a solution for an inequality?How is this different from determining if a value is a solution to an equation? If you replace the equal sign of an equation with an inequality sign, is there ever a time when the same value will be a solution to both ...

### math

How do you know if a value is a solution for an inequality? How is this different from determining if a value is a solution to an equation? If you replace the equal sign of an equation with an inequality sign, is there ever a time when the same value will be a solution to both...

### Algerbra

How do you know if a value is a solution for an inequality? How is this different from determining if a value is a solution to an equation? If you replace the equal sign of an equation with an inequality sign, is there ever a time when the same value will be a solution to both...

### chem

A sample of 7.80L of NH3(ammonia) gas at 22 degrees Celsius and 735torr is bubbled into a 0.350L solution of 0.400M HCl (hydrochloric acid). The Kb value for NH3 is 1.8x10-5. Assuming all the NH3 dissolves and that the volume of the solution remains at 0.350L , calculate the ...

### Physic Help

Charge is distributed through an infinitely long cylinder of radius R in such a way that the charge density is proportional to the distance from the central axis: ß = A r, where A is a constant and ß is the density. (a) Calculate the total charge contained in a segment of ...

### Biology

Two samples of DNA have the same melting point and density. Does this prove that they are from the same species? Explain clearly and back up your reasons. I read in my notes and all it said was that DNA species isolated from different organisms have different melting ...

### Chemistry

Indicate the concentration of each ion or molecule present in a mixture of 45.5 mL of 0.274 M NaCl and 65.5 mL of 0.0246 M (NH4)2CO3. Assume that the volumes are additive. [Cl-] [NH4+] [CO32-]

### chemistry

The mechanism of solubility depends on the solute and solvent. Describe on an ionic or molecular scale how each of the following dissolve: a.NaCl in H2O b.I2 in CCl4 c.CH3CH2OH in H2O

### Chemistry

When an excess of CaO is added to 200.0 mL of 0.500 M HCl(aq), a temperature increase of 4.01C is observed. Assume the solution's final volume is 200.0 mL, the density is 1.00 g/mL, and the heat capacity is 4.184 J/gC. (Note: Pay attention to significant figures. Do not round ...

### chemistry

I wanted to double check how to go about creating a 1% solution and a 4% solution. I know that it is 1 part to 99 and 4 part to 96. so I add 1ml of solution and then water and the same for the four percent. I wanted to know if you also had any good site to understand making ...

### chemistry

If a precipitation reaction occurs when a solution of one species is added to a solution of the other, enter the formulas and states of all products. Separate by comma. If there is no reaction, enter the formula and state of all ions in solution. magnesium chloride + silver ...

### chemistry

If a precipitation reaction occurs when a solution of one species is added to a solution of the other, enter the formulas and states of all products. Separate by comma. If there is no reaction, enter the formula and state of all ions in solution. aluminum sulfate + lead(II) ...

### science(Chemistry)

Calculate the concentration of the NaOH solution. If 30,0cm3 of a standard oxalic acid[(COOH)2] solution of concentration 0,5 mol.dm-3,is used to neutralize 25,0 cm3 of a sodium hydroxide (NaOH) solution. The balanced chemical equation for the reation is (COOH)2(aq) + 2NaOH(aq...

### Chemistry

Consider a 0.80M solution of HCN. The Ka of HCN is 6.2x10-10. What are the major species in solution? Calculate the pH of this solution. ----------------------------------- Ok, so i took a break, came back, and finished the problem. I have an x value of 2.23x10-5. I took the ...

### Chemistry

A buffer solution is prepared by adding 14.37g of NaC2H3O2 and 16.00g of acetic acid to enough water to make 500mL of solution. What is the initial concentration of C2H3O2 in the solution? Ka(HC2H3O2)=1.8e-5 HC2H3O2 = H3O+ + c2h3O2 the molar mass of NaC2H3O3 = 82.04 I know ...

### Chemistry

Consider the titration of 50 mL of 0.250 M HCl with 0.1250 M NaOH. Calculate the pH of the resulting solution after the following volumes of Na OH have been added. a) 0.00 mL b) 50.00 mL c) 99.90 mL d) 100.00 mL e) 100.1 mL The question is, I get, for example, 0.9 pH for "a." ...

### Chemistry

A 5.00-mL sample of a sulfuric acid solution of unknown concentration is titrated with a 0.1401 M Sodium Hydroxide solution. A volume of 5.99 mL of the base was required to reach the endpoint. What is the concentration of the unknown acid solution? Write the neutralization ...

### science chemistry

Brandon prepares a potassium hydroxide solution (KOH) that he uses during a titration to determine the unknown concentration of a hydrochloric acid solution calculate the mass of potassium hydroxide that is need to prepare 250 cm^3 of a standard 0,125 mol.dm^-3 KOH solution.

### Physics

The mass of Venus is 0.8140 times that of earth, and its radius is 0.950 times that of earth. Calculate the acceleration of gravity at the surface of Venus. Express your answer in g's (i.e. as a ratio to our acceleration of gravity). 9.01×10-1 is the correct ratio Calculate ...

### chemistry

Hexane is a hydrocarbon (a molecule containing only carbon and hydrogen) with a molecular weight of 86.18 g/mol, a density of 0.660 g/mL, and a boiling point of 69C. Pentanol is an alcohol (a hydrocarbon with a "OH" group attached to one of its carbons) with a molecular weight...

### chemistry

Hexane is a hydrocarbon (a molecule containing only carbon and hydrogen) with a molecular weight of 86.18 g/mol, a density of 0.660 g/mL, and a boiling point of 69C . Pentanol is an alcohol (a hydrocarbon with a "OH" group attached to one of its carbons) with a molecular ...

### chemistry

why is the formula written for an ionic compound such as NaCl the empirical formula,rather than a molecular formula?

### Calculus

Solve the following initial value problem and determine the interval where the solution exists. dy/dt = 2ty^2 y(0) = y_0 Textbook answer is: When y_0 <> 0, then y = 1/(1/y_0 - t^2). When y_0 = 0, then y = 0 When y_0 > 0, the interval where solution exists is |t| < ...

### Chemistry

A 10.0 ml sample of vinegar which is an aqueous solution of acetic acid, requires 16.5ml of a 0.500M NaOH solution to reach the endpoint in a titration (where the moles of acid are equal to the moles of base). What is the molarity of the acetic acid solution?

### math

you have an unlimited supply of 5% saline solution and 8% saline solution. How much of each type would you have to use to create 60 ounces of 7% saline solution? Write and solve a system of equations to model and solve this problem.

### math

A chemist has 30%, 40 % and 80 % acid solutions. All three were to be mixed to make 4.00 x 102 L of 38% acid solution but a mistake was made and the amounts of 30% and 80 % were reversed. The result was 4.00 X 102 L of 65 % acid solution. What were the amounts of each solution...

### Chemistry

Suppose 26.0g of sodium bromide is dissolved in 150mL of a 0.60M aqueous solution of silver nitrate. Calculate the final molarity of bromide anion in the solution. You can assume the volume of the solution doesn't change when the sodium bromide is dissolved in it.

### math/algebra

Solve the polynomial inequality and graph the solution set on a real number line. Express the solution set in interval notation x^3+x^2+16x+16>0 What is the solution set? (Type your answer in interval notation.) shannon

### Math (Algebra)

A chemistry student needs to make 60 liters of a 30% alcohol solution. He has a 20% alcohol solution and a 40% alcohol solution in the lab. How many liters of each strength does he need to mix together *The system of equations I did was: a+b=60 & .2a+.4b=18. I may be wrong but...

### Chemistry

WOULD THE VOLUME OF A 0.10M NAOH SOLUTION NEEDED TO TITRATE25.0ML OF A 0.10M HNO2 ( A WEAK ACID)SOLUTION BE DIFFERENT FROMTHAT NEEDED TO TITRATE 25.0ML OF A 0.10M HCL (A STRONGACID)SOLUTION?

### math

A 12 qrt. cooling system is checked and found to be filled with a solution that is 40 % antifreeze. The desired strength of the solution is 60% antifreeze. how many quarts of solution need to be drained and replaced with pure antifreeze to reach the desired strength.

### Algebra

Solve the polynomial inequality and graph the solution set on a real number line. Express the solution set in interval notation x^3+x^2+16x+16>0 What is the solution set? (Type your answer in interval notation.) qaz

### algebra

Solve the polynomial inequality and graph the solution set on a real number line. Express the solution set in interval notation x^3+x^2+16x+16>0 What is the solution set? (Type your answer in interval notation.) Mike

### Chemistry

References Chapter 17: EOC Assume you dissolve 0.178 g of the weak acid benzoic acid, , in enough water to make mL of solution and then titrate the solution with 0.187 M . ( for benzoic acid = .) What was the pH of the original benzoic acid solution?

### Chemistry

What are the molar heat capacities of: H2O(l) NaCl and Tungsten? I got 75.32 J/K*mol 50 J/K*mol 24.8 J/K*mol

### Chemistry

Redox titrations are used to determine the amounts of oxidizing and reducing agents in solution. For example, a solution of hydrogen peroxide,H2O2, can be titrated against a solution of potassium permanganate, KMnO4. The following equation represents the reaction: 2KMnO4(aq)+...

### chemistry

A 10.0-mL sample of vinegar, which is an aqueous solution of acetic acid, CH3COOH, requires 16.5 XML of a 0.500M NaOH solution to reach the endpoint in a titration (where the moles of acid are equal to the moles of base). What is the molarity of the acetic acid solution

### Chemistry

Calculate [CO32- ] in a 0.019 M solution of CO2 in water (H2CO3). If all the CO32- in this solution comes from the reaction shown below, what percentage of the H+ ions in the solution is a result of the dissociation of HCO3‾? HCO3‾(aq) H+(aq) + CO32-(aq)

### chemistry

Suppose 0.432g of zinc acetate is dissolved in 200.mL of a 16.0mM aqueous solution of ammonium sulfate. Calculate the final molarity of acetate anion in the solution. You can assume the volume of the solution doesn't change when the zinc acetate is dissolved in it.

### Chemistry

You have a solution of 0.15M Ba(OH)2 and a solution of H2SO4 whose concentration you want to determine. You start with 25 ml H2SO4 in the Erlenmeyer and titrate in the Ba(OH)2. At the end of the titration, you find that you have used 20.4 ml Ba(OH)2 and an additional 2.2 ml ...

### physics

Bird bones have air pockets in them to reduce their weight–this also gives them an average density significantly less than that of the bones of other animals. Suppose an ornithologist weighs a bird bone in air and in water and finds its mass is 43.0 g and its apparent mass ...

### Chemistry

A solution contains 1.694 mg of CoSO4 (MW 155.0) per mL. Calculate a) The volume of 0.008640 M EDTA needed to titrate a 25.00 ml aliquot of this solution. Step 1. 0.001694g * 25ml * 1/155 g/mol= 0.0002732 mol Step 2. Volume of EDTA needed = 0.0002732 mol/ 0.008640 M = 0.03125 ...

### College Chemistry

1) A 25mL sample of the .265M HCI solution from the previous question is titrated with a solution of NaOH. 28.25mL of the NaOH solution is required to titrate the HCl. Calculate the molarity of the NaOH solution. 2) A 1.12g sample of an unknown monoprotic acid is titrated with...

### Chemistry Lab

A student who is performing this experiment pours an 8.50mL sample of saturated borax solution into a 10mL graduated cylinder after the borax has cooled to a certain temperature, T. The student rinses the sample into a small beaker using distilled water, and then titrates the ...

### Chemistry

Please help me with these! Thanks :) Describe, in detail, how to make 5.5 liters of a 2.5 molar HCl solution from a 10.5 molar HCl stock solution. How many grams of a stock solution that is 85.5 percent H2SO4 by mass would be needed to make 150 grams of a 45.0 percent by mass ...

### physics

the density of a cube is measured by it's mass and length of it's side if the maximum error in the measurement of mass and length are 3% and 2% respectively. the maximum error in the measurement of density of cube is?

### Chemistry

I saw that article on Google - that is actually how I got the idea to sublimate the naphthalene. But thank you for the suggestion! It makes me feel much more confident to know that I am on the right track! Thank you! We have a lab where we have to separate five components. The...

### chemistry

Suppose of copper (II) nitrate is dissolved in of a aqueous solution of sodium chromate. Calculate the final molarity of nitrate anion in the solution. You can assume the volume of the solution doesn't change when the copper (II) nitrate is dissolved in it. Round your answer ...

### chemistry

1) Aqueous solutions of potassium sulfate and ammonium nitrate are mixed together. Which statement is correct? A) Both KNO3 and NH4SO4 precipitate from solution B) A gas is released C) NH4SO4 will precipitate from solution D) KNO3 will precipitate from solution E) No reaction ...

### math

At the end of Summer, Puss discovers that his radiator antifreeze solution has dropped below the safe level. If the radiator contains 4 gallons of a 25% antifreeze solution, how many gallons of pure antifreeze must he add to bring it up to a desired 50% solution? is the answer...

### math

Solve the system by graphing. Then classify the system.? 6x-y=50 6x+7y=-14 What is the solution of the system? (type an ordered pair. Type N if there is no solution. Type R if the solution is all real numbers)

### chemistry

How would I make 500 ml's of a .35M NaCI solution. MW= 58.44 ( I know how to do the first part) How many micromoles of NaCI would be present in that solution? What would be the percentage of NaCI in that solution?

### Chemistry

the lead (II) nitrate in 25.49 ml of a 0.1338M solution reacts with all of the aluminum sulfate in 25.00 ml solution. What is the molar concentration of the aluminum sulfate in the original aluminum sulfate solution?

### Physics

Why do your vowels examples ("aaah", "eee", "uhh") sound different then when I make them? Explain. Tension, mass density and the length of our vocal cords differ so would that be the reason why they sound different? For instance: a child's voice is usually higher pitched than ...

### Chemistry

A solution of hydrogen peroxide, H2O2, is titrated with potassium permanganate, KMnO4, according to the following equation: 5H2O2 + 2KMnO4 + 3H2SO4 = 5O2 + 2MnSO4 + 8H2O + K2SO4. It requires 46.0 mL of 0.145 Mol/L KMnO4 to titrate 50.0 mL of the solution of H2O2. What is the ...