a density of 1.0 M solution of NaCL
29,493 results, page 32

Physics
an open tank contains a layer of oil floating on top of a layer of water (of density 1000 kg/m3) that is 3.0 m thick, as shown. What must be the thickness of the oil layer if the gauge pressure at the bottom of the tank is to be 9.1×104 Pa? The density of the oil is 880 kg/m3? 
Chemistry
An object made of aluminum has a mass of 8.37g. When it was placed in a graduated cylinder containing 20.0mL, the water level rose to 23.1mL. Calculate the density and the specific gravity of the object. For the density I got 2.7g/mL, and for specific gravity I got 0.135g/mL. ... 
Chemistry
The vapor pressure of an unknown substance is given at various temperatures. properties of the substance are: density of solid=1.375g/ml density of liquid= 1.150g/ml. freezing point= 275.0K boiling point=375.0 K How would i calculate the vapor pressure at 150.0K 
physics
1. A cylinder tank is 30m deep,calculate the pressure extended at the bottom of the tank,when it is fourfifth filled with water (g=10mg2,density of water =1000kgm2) 2.a sample of air weighing 1.32*10^2N is confined in a room measuring 9.5m*2.0m.calculate the density of the ... 
Algebra
A chemist wishes to mix a solution that is 4% acid. She has on hand 66 liters of a 2% acid solution and wishes to add some 8% acid solution to obtain the desired 4% acid solution. How much 8% acid solution should she add? There is a ... 
Chemistry
a solution of HCL is approximately 0.1M and has to be standardized . 1.234g Na2CO3 are dissolved to make 100ml of solution. 20mL of this solution are titrated with the HCL solution, requiring 31.3mL for the second equivalence point. what is the exact concentration of the HCL ... 
Science
Overpopulating rabbits in Australia were finally controlled by a disease spread trough the population. A higher death rate was recorded in regions with large population than small population. The disease can be considered.... A. A densitydependent factor. B. A density... 
CHEM
a gas bulb is connected to an open end manometer. the pressure in the bulb is .355 torr MORE than atmospheric pressure. If the manometer is filled with mineral oil (density .888 g/cm^3) then what wil be the difference in height between the two sides of the manometer? (density ... 
college
if an object sinks in a particular fluid,the weight density (weight/volume) of the object will less than, equal to, or greater than, the weight density of the fluid 
science
a piece of wood that measures 3.0 cm by 4.0 cm by 5.0 cm has a mass of 90.og. what is the density of the wood? would the piece of wood float in water? remember the density of water is 1.00g/ml 
Chemistry
A solution of 0.316 M KOH is used to neutralize 16.0 mL H3PO4 solution H3PO4(aq) + 3KOH(aq) ¨ K3PO4(aq) + 3H2O(l) If 30.3 mL KOH solution is required to reach the endpoint, what is the molarity of the H3PO4 solution? Molarity = ____________ 
density of Magnesium!
Magnesium crstallizes in the hcp arrangment. The dimensions of the unit cell are height 520om, length on an edge, 320. Calculate the density of Mg (s) and compare it with the measured value of 1.738 g/cm^3 this is what i did : m= 2* 24.30g/6.022*10^23 = 8.07*10^23 v= l^2*h v... 
chem
A solution is made by dissolving 27.8 g of nicotine (Molar Mass = 160 g/mol) in 145 g of cyclohexane (C6H12) to form 142 mL of solution. Calculate the mole fraction of the solute and the molarity, respectively, of this solution. 
cHEM
cThe price of gold is $625 per troy ounce at this writing. How much heat (in J) is needed to raise the temperature of $5000.00 worth of gold from 29.5 oC to 70.5 oC? (1 troy oz = 31.10 g and the specific heat of Au is 25.42 J/(moloC).) I got 5.125, which isn't right. ... 
electric physics
Near Earth, the density of protons in the solar wind (a stream of particles from the Sun) is 12.4 cm3, and their speed is 576 km/s. (a) Find the current density of these protons. (b) If Earth's magnetic field did not deflect the protons, what total current in amperes Earth ... 
college physics
One cm of a 10cmlong rod is made of metal, and the rest is wood. The metal has a density of 5000kg/m^3 and the wood has a density of 500kg/m^3. When the rod is set into pure water, the metal part points downward. How much of the rod is underwater? 
college physics
One cm of a 10cmlong rod is made of metal, and the rest is wood. The metal has a density of 5000kg/m^3 and the wood has a density of 500kg/m^3. When the rod is set into pure water, the metal part points downward. How much of the rod is underwater? 
Chemistry
hmmm...I just can't seem to get it. It looks like I got it right up to the volume of the metal point. Don't I have to divide the mass of the metal by the density of the water given before? (0.9970)? I guess I am having a problem with this which results in the wrong answer for ... 
Math .
3(4x  2) = 2(6x  3) one solution infinite solutions ** no solution a+5 = 1/5(5a + 25) one solution infinite solutions no solution ** 3(4x  3)  7x = 5x  9 one solution infinite solutions no solution 8+2(8x  6) (choose all that apply) 2(4x + 7) 9x – 10 16x – 4 ** 4(4x... 
Physics of materials
Gaseous nitrogen has a density of 1.17 kg/m3 and liquid nitrogen has a density of 810 kg/m3. [The relative molecular mass of nitrogen is 28.0] What is the mean volume per nitrogen molecule in each case? What is the mean separation between nitrogen molecules in each case? 
Material Physics
Gaseous nitrogen has a density of 1.17 kg/m3 and liquid nitrogen has a density of 810 kg/m3. [The relative molecular mass of nitrogen is 28.0] What is the mean volume per nitrogen molecule in each case? What is the mean separation between nitrogen molecules in each case? 
CHEMISTRY
When 0.756 g of Ca metal is added to 200.0 mL of 0.500 M HCl(aq), a temperature increase of 123C is observed. Assume the solution's final volume is 200.0 mL, the density is 1.00 g/mL, and the heat capacity is 4.184 J/gC. (Note: Pay attention to significant figures. Do not ... 
chemistry
When 0.667 g of Ca metal is added to 200.0 mL of 0.500 M HCl(aq), a temperature increase of 108C is observed. Assume the solution's final volume is 200.0 mL, the density is 1.00 g/mL, and the heat capacity is 4.184 J/gC. (Note: Pay attention to significant figures. Do not ... 
Chemistry
When 0.689 g of Ca metal is added to 200.0 mL of 0.500 M HCl(aq), a temperature increase of 112C is observed. Assume the solution's final volume is 200.0 mL, the density is 1.00 g/mL, and the heat capacity is 4.184 J/gC. (Note: Pay attention to significant figures. Do not ... 
chemistry
When 0.767 g of Ca metal is added to 200.0 mL of 0.500 M HCl(aq), a temperature increase of 125C is observed. Assume the solution's final volume is 200.0 mL, the density is 1.00 g/mL, and the heat capacity is 4.184 J/gC. (Note: Pay attention to significant figures. Do not ... 
Chem 1LB
When 0.678 g of Ca metal is added to 200.0 mL of 0.500 M HCl(aq), a temperature increase of 11.0C is observed. Assume the solution's final volume is 200.0 mL, the density is 1.00 g/mL, and the heat capacity is 4.184 J/gC. (Note: Pay attention to significant figures. Do not ... 
Chem 1LB
When 0.678 g of Ca metal is added to 200.0 mL of 0.500 M HCl(aq), a temperature increase of 11.0C is observed. Assume the solution's final volume is 200.0 mL, the density is 1.00 g/mL, and the heat capacity is 4.184 J/gC. (Note: Pay attention to significant figures. Do not ... 
Chemistry
Lake VIda is an enormous hypersaline lake that lies under 19 m of ice in the Dry Valleys region of Antartica. The freezing point of this water is approximately 15.0 degrees C, owing to the fact that it is many times as salty as typical saltwater. Calculate the osmotic ... 
physics
If a segment of wire has a net charge (uniformly distributed), and then its length is increased by 50%,by what factor has its charge density changed? If the original charge was 10.0 nC, how much charge must then be added to restore the wire’s original charge density? 
physics
If a segment of wire has a net charge (uniformly distributed), and then its length is increased by 50%,by what factor has its charge density changed? If the original charge was 10.0 nC, how much charge must then be added to restore the wire’s original charge density? 
Physics
Two infinitely long slits, S1 and S2, each of width d=0.1 cm are used to prepare a boxshaped electron beam with energy E=400 eV. At what distance x from the slit S2 will the thickness of this electron beam double due to Coulomb's repulsion? The linear density of electron ... 
chemistry
The equation for burning C2H2 is 2C2H2(g) + 5O2(g) ⎯→ 4CO2(g) + 2H2O(g) a. If 15.9 L C2H2 react at STP, how many moles of CO2 are produced? (Hint: At STP, 1 mol = 22.41 L for any gas.) b. How many milliliters of CO2 (density = 1.977 g/L) can be made when 59.3 mL O2... 
chemistry
The density of diamond is 3.51 g/cm^3 and the density of platinum is 21.43g/cm^3. If equal masses of diamond and platinum are transferred to equal volumes of water in separate graduated cylinders, which graduated cylinder would have the greatest volume change? Explain or show ... 
chemistry
The density of diamond is 3.51g/cm^3,and the density of platinum is 21.43g/cm^3.If equal masses of diamond and platinum are transferred to equal volumes of water in separate graduated cylinders,which graduated cylinder would have the greatest volume change? can you show me a ... 
solution of an equation
can someone please give me an example of a solution of an equation An equation is a statment with the equal sign = in it. If we have y=2x+3 and we're asked to find x when y=7 then we would have to solve 7=2x+3 The solution of that equation is x=2. Was there a specific equation... 
7th grade Science
How does the internal structures of earth's density compare to the lithosphere's density? It is a lot greater, a little greater, a lot smaller or a little smaller? 
Science
An object weighed 7N in air and 5N in water.If the object is immersed completely in water and the density of water is 1000kg m3, calculate the ; (a) weight of water displaced, (b) Volume of the object (c) density of the object 
Chemistry
Aqueous sulfurous acid (H2SO3) was made by dissolving .200L of sulfur dioxide gas at 19 degrees C and 745 mmHg in water to yield 500mL of solution. the acid solution required 12mL of sodium hydroxide solution to reach the titration end point. what was the molarity of the ... 
Chemistry
A solution is prepared by dissolving 50.0 g of pure HC2H3O2 and 20.0 g of NaC2H3O2 in 975 mL of solution (the final volume). what is the ph? What would the pH of the solution be if 50.0 mL of 0.900 M NaOH were added? What would the pH be if 30.0 mL of 0.30 M HCl were added to ... 
Differential Equations
For the following initial value problem: dy/dt=1/((y+1)(t2)), y(0)=0 a)Find a formula for the solution. b) State the domain of definition of the solution. c) Describe what happens to the solution as it approaches the limit of its domain of definition. Why can't the solution ... 
physics
A raft is constructed of wood havig a density of 600kg/m^3. The surface area of the bottom of the raft is 5.7m^2 and the volume of the raft is .60m^3. When the raft is placed in fresh water having a density of 1000kg/m^3, how deep is the bottom of the raft below water level ? 
Chemistry
2 Gases A2 and B2 react according to the equation: A2 + B2 → AxBy . If equimolar ( not necessarily stoichiometrically equivalent) quantities are placed in a reaction vessel with a massless, frictionless piston and allowed to react to completion. The density of the gas ... 
Chemistry
Potassium permangenat reacts with sodium oxalate to form carbon dioxide and Mn2+.determine the consentration of a permangenate solution.since the reaction runs in acidic conditions, 25ml of 2 M sulfuric acid was added to 20.00ml of the unknown permangenate solution. It was ... 
chemistry
A student is given 3 beakers: Beaker 1 50.0 ml of a solution produced by dissolving 6.00 grams of a weak monoprotic acid ,HX, in enough water to produce 1 liter of solution. The empirical formula of HX is CH2O. The solution contains 3 drops of phenolphthalein. Beaker 2 A 0.... 
chemistry
How do you know the state of an element or compound when writing chemical equations? Unless otherwise known, assume the state of the element at room temp. Here is the real problem. For aqueous compounds, ie, compounds dissolved in water, you have to have that given. There is a... 
Science physics
A balloon weighing 80 kg has a capacity of 1200 m3. If it is filled with helium, how great a payload can it support? The density of helium is 0.18 kg/m3 and the density of air is 1.30 kg/m3. Express your answer in Newtons. I know the answer is 12, 400 Newtons I just don't know... 
Chemistry
Calculate the pressure in an evacuated 250. mL container at 0.00 degrees C if 3.20 cm^3 of liquid oxygen evaporates. Assume that the liquid oxygen has a density of 1.118 g/cm^3 I understand that the density and volume can be used to find the mass in grams. However, I'm ... 
Physics
Explain in detail how you would find the density of an unknown highdensity object if you had only the objects listed below.If you show calculations, make sure you define your variables.Assume all containers are large enough to hold the object.... You have:  beaker with ... 
Chemistry
A solution of acetic acid having a concentration of about 0.2M is to be titrated using 0.200M NaOH. Select an indicator for the titration. what salt will the solution contain at the equivalence point? what is the approximate concentration of this salt at the equivalence point... 
Physics help
The galaxies in the universe are all flying away from each other. The speeds of nearby galaxies are proportional to the distance the galaxy is away from us. This relation, v=Hd is known as Hubble's law and the constant H is known as Hubble's constant. The evolution of our ... 
algebra
Dilbert needs to mix a 10% alcohol solution with a 30% alcohol solution to create 100 millileters of a 16% solution. How many millileters of each solution must Dilbert use? 
ALGEBRA
Alewuya needs to mix a 20% acid solution with a 40% acid solution to create 100 millileters of a 24% solution. How many millileters of each solution must Alewuya use? 
Chem
What is the density of N2O, a gas, at STP? How many moles are in 16 grams of O2? density = mass/volume 1 mol of a gas occupies 22.4 L at STP. density = molar mass/molar volume = ?? #2. 1 mol O2 has a mass of 32 grams? grams = mols/molar mass = ?? 
Nuhu Bamali Poly zaria Nig
Chemistry volumetric analysis. B is a solution of Na2CO3 containing 5g/dm3. A is a solution of oxalic acid of uknown concentration 25cm3 of 25.25,25.0 and 24.80 respectively (I) Calculate the average volume of acid used (II) The molar concentration of solution A (III) The ... 
Chemistry
O.k. I am confused. So here is what I did. Mass of empty flask plus stopper: 37.34g mass of stoppered flask plus water: 63.67g Mass of stoppered flask plus liquid: 52.01g Mass of water: 63.67  37.34= 26.33 Volume of Flask(density of H20 at 25*C, 0.9970 g/cm^3: (37.34g)/(0.... 
Chemistry  Equilibrium
You have an unknown concentration of ammonia. When you add 15.0mL of a 0.400 M HCl solution to 50.0mL of the ammonia solution, the pH of the solution becomes 8.75. What is the concentration of the original ammonia solution? [Kb (NH3) = 1.8 x 10^5] 
PHYSICS NEED HELP FAST
a 1.0kg beaker containgin 2.00kg of oil with a density of 916kg/m3 rests on a scale. a 2.0kg block of iron is suspended from a spring scale and completly submerged in the oil, find the euilibrium readings of both scales.density of iron 7860. 
PHYSICS NEED HELP FAST
a 1.0kg beaker containgin 2.00kg of oil with a density of 916kg/m3 rests on a scale. a 2.0kg block of iron is suspended from a spring scale and completly submerged in the oil, find the euilibrium readings of both scales.density of iron 7860. 
PHYSICS NEED HELP FAST
a 1.0kg beaker containgin 2.00kg of oil with a density of 916kg/m3 rests on a scale. a 2.0kg block of iron is suspended from a spring scale and completly submerged in the oil, find the euilibrium readings of both scales.density of iron 7860. 
Chemistry
The density of diamond is 3.51g/cm^3,and the density of platinum is 21.43g/cm^3.If equal masses of diamond and platinum are transferred to equal volumes of water in separate graduated cylinders,which graduated cylinder would have the greatest volume change? Explain or show ... 
Algebra
What is the solution to 5t=23? My answer is 18. What is the value of b if 7+b=8? My answer is 1. What is the solution to 5q=75? My answer is either 25 or 15. What is the solution to 6z=72? My answer is 12. What is the solution to 7+h=12? My answer is 19. What is the ... 
Chem
.1 M HCl + .1 M NaCl .1 M HF + .1 M NaF .1 M HBr + .1 M NaBr Which of the above would be considered buffers? 
chemistry
What are the different physical properties between HCl and NaCl? And explain the causes of their differences? THANKS 
chemistry
What are the different physical properties between HCl and NaCl? And explain the causes of their differences? 
chemistry11111111
What are the different physical properties between HCl and NaCl? And explain the causes of their differences? 
chemistry
How would you prepare the following solutions? A)2%NaCL(w/v) B)0.35M glucose C)0.12M CaCI2 
Chemistry
Calculate the pH of (1)0.150M KC2H3O2: (2)0.200M pyridine chloride, C5H5NHCl: and(3) 0.500M NaCl 
Chemistry
Calculate the pH of (1)0.150M KC2H3O2: (2)0.200M pyridine chloride, C5H5NHCl: and(3) 0.500M NaCl 
chemistry
5. What is the conversion factor that you would want to use to convert 2.0 moles of NaCl into grams? 
Chemistry
What is the concentration of NO3 ions when equal volumes of 0.1M AgNO3 and 0.1M NaCl are mixed together? 
Chemistryor
Will Zn(NO3)2 react in a metathesis reaction with NACl, BACL2, NAIO3 or AL2(SO4)3 
Chemistry
Does Na2CO3 have a methatesis reaction with NaCl, NaIO3, or Al2(SO4)3. If it does which one and why. 
Chemistry I
I need to convert 0.17mg of NaCl to formula mass units. How would I go about that? 
Chem
Does any solid PbCl2 form when 3.1 mg NaCl is dissolved in 0.228 L of 0.12 M Pb(NO3)2. Find the Qsp. 
chemistry
What type of chemical reaction is this? Is it double displacement? Thank you! HCL + NaOH – H20 + NaCl 
chemistry
using a litmus paper only,how would you distinguish between HN4 and NaCl 
Chemistry
Calculate the solubility of 43g of NaCl containing 100ml of water at temperature of 20 degrees 
Chemistry
How many moles of sodium ions are present in a 50.0 g sample of NaCl? Do I use avagadros number? 
Chemistry
What is the concentration when each of the following is dissolved in 1.50 L of water: a) 3.00 moles of NaCl b) 10 g of KCl c) 110 mg of NaCO3 
Science
minimum temperature required to dissolve 40g NaCl in 100g water thanks a ton 
Math
A chemistry teacher needs 2.5 liters of a sulfuric acid solution that is 20% sulfuric acid and 80% water . He has 2 liters of a 15% sulfuric acid solutionleft over from earlier laboratory exercises. He also has 44 liters of a 50% solution. Let x represent the number of liters ... 
Physics Using hydrostatic equilbrium)
3. A model of Earth’s interior: Look up the radius and mass of the Earth. Radius is 6,371 km Mass is 5.974 x 10^24 kg Calculate its average density. p_e = (5.974 x 10^24 kg)/ (4/3)pi r^3 = (5.974 x 10^24 kg)/ (4/3)pi (6371)^3 = 5.54 g/cm^3 Using this Imagine a planet of the ... 
Chemistry
A solution is prepared using 15.0 mL of 1.0 M HCl and 20.0 mL of 0.5 M HNO3. The final volume of the solution is 1.25 L. What are the [H3O+] and [OH] in the final solution? What is the pH of the final solution? Ok. I got 0.015 mol HCl and 0.1 mol HNO3. Do I just add the moles... 
chemistry lab
When 0.969 g of CaO is added to 200.0 mL of 0.500 M HCl(aq), a temperature increase of 397C is observed. Assume the solution's final volume is 200.0 mL, the density is 1.00 g/mL, and the heat capacity is 4.184 J/gC. (Note: Pay attention to significant figures. Do not round ... 
chemistry
4. Compound B is provided as a solution and has a specific gravity of 0.65 (Specific gravity is the weight in grams per mL of solution) and is known to be 90% pure (each gram of compound B solution only contains 90% Compound B and 10% of degradation products). 4.5 mL of ... 
chemistry
4. Compound B is provided as a solution and has a specific gravity of 0.65 (Specific gravity is the weight in grams per mL of solution) and is known to be 90% pure (each gram of compound B solution only contains 90% Compound B and 10% of degradation products). 4.5 mL of ... 
science
Compound B is provided as a solution and has a specific gravity of 0.65 (Specific gravity is the weight in grams per mL of solution) and is known to be 90% pure (each gram of compound B solution only contains 90% Compound B and 10% of degradation products). 4.5 mL of Compound ... 
Algebra Help
1. Verify that (4, 12) is the solution to the system. Show work to justify your answer 2x+y=5 5x2y=6 2. Solve the system by graphing. State the solution. x + y =2 2y – x = 10 3. Solve the system by substitution. State whether the system has one solution, infinite ... 
Chemistry
When 0.702 g of Ca metal is added to 200.0 mL of 0.500 M HCl(aq), a temperature increase of 114C is observed. Assume the solution's final volume is 200.0 mL, the density is 1.00 g/mL, and the heat capacity is 4.184 J/gC. (Note: Pay attention to significant figures. Do not ... 
Chemistry
When 0.655 g of Ca metal is added to 200.0 mL of 0.500 M HCl(aq), a temperature increase of 107C is observed. Assume the solution's final volume is 200.0 mL, the density is 1.00 g/mL, and the heat capacity is 4.184 J/gC. (Note: Pay attention to significant figures. Do not ... 
Chemistry Lab
When 0.671 g of Ca metal is added to 200.0 mL of 0.500 M HCl(aq), a temperature increase of 109C is observed. Assume the solution's final volume is 200.0 mL, the density is 1.00 g/mL, and the heat capacity is 4.184 J/gC. (Note: Pay attention to significant figures. Do not ... 
Chemistry
Tartaric acid has two acidic (ionizable) hydrogens. The acid is often present in wines and precipitates from solution as wine ages. A solution containing an unknown concentration of the acid is titrated with NaOH. It requires 22.62 mL of 0.2000 M NaOH solution of titrate both ... 
Chemistry
An unlabeled bottle containing a solution was found in the lab. It contains one of the following: AgNo3, CaCl2, or Al2(SO4)3. Describe how you would test the solution to determine which solution it is. Include equations in your answer. 
chemistry
A student dissolved 3.65 g of hydrogen chloride gas,HCL in water to make 1.0dm^3 of solution.Calculate the volume of a 0.1 mol dm^3 barium hydroxide,Ba(OH)2 solution required to completely neutralise 25.0 cm^3 of the acid solution.(RAM:H,1;CL,35.5) 
chemestry
To 400mL of a 0.1 M CH3COOH solution(Ka=1.8 x 105),two subsequent additions of 100mL of 0.2 M NaOH solution have been done.determine the solution pH after each addition. Drbob,I don't understand this problem how to solve.Can you help me and give me the full calculation. 
CHEMISTRY
1.) A solution is prepared by dissolving 5.00 g of stannic nitrate in enough water to make 250.0 mL of stock solution. A 15.0 mL aliquot (portion) of this stock solution is then removed and added to 75.0 mL of water. Calculate the concentrations of all ions in the final ... 
Chemistry
How would you usually prepare starch indicator solution for iodine titrations? Can the solution be stored for a few months in the fridge? I noticed that sometimes the starch indicator solution in the fridge has turned cloudy, in which case we should prepare a new solution? 
chemistry
The concentration of a certain ionic compound in aqueous solution is 0.186mol/L . It is only solute in the solution. The concentration of pottassium ions in the same solution ia 0.558mol/L. Explain why the concentrations of the ions in the solution are different. What might ... 
Chemistry
If some NH4Cl is added to an aqeous solution of NH3: A. pH of solution will decrease B. PH will not change C. pH will increase D. NH4Cl cannot be added to NH3 E. The solution will not have pH I think the answer is B, because if NH4Cl is added to the solution of NH3, then ... 
Chemistry Help Please!
1) You have a protein at 20 ug/ml. Its MW =10,000. What is the concentration in molarity? Show work please! 2) You are asked to make 30 mL of a solution at 0.03M using the 0.10M stock solution. How many mililliliters of water do you use to make this solution? How many ...