Please be specific! Briefly explain whether each if the following procedural errors would result in a high, low, or an unchanged calculated mass of Ca2+ in the analyzed tablet. a)a student had difficulty decanting the supernatant solution from the test

196,887 results

chemistry

Please be specific! Briefly explain whether each if the following procedural errors would result in a high, low, or an unchanged calculated mass of Ca2+ in the analyzed tablet. a)a student had difficulty decanting the supernatant solution from the test tubes in step 9, causing...

college chemistry

Please be specific! Briefly explain whether each if the following procedural errors would result in a high, low, or an unchanged calculated mass of Ca2+ in the analyzed tablet. a)a student had difficulty decanting the supernatant solution from the test tubes in step 9, causing...

chem 121

A student rushed in order to complete this experiment quickly. In attempting to save time, the student made some procedural errors. Briefly describe the effect of each of the following errors on the calculated ratio of Mg to O (indicate whether the calculated ratio would be ...

chemistry

Would the following procedural errors result in an incorrectly high or low calculated percent NaOCl in commercial bleach solution? A student failed to allow the volumetric pipet to drain completely when transferring the diluted bleaching solution to the Erlenmeyer flask. I get...

chemistry

Would the following procedural errors result in an incorrectly high or low calculated percent NaOCl in commercial bleach solution? A student failed to allow the volumetric pipet to drain completely when transferring the diluted bleaching solution to the Erlenmeyer flask. I get...

chemistry

The following errors occurred when the above experiment was carried out. How would each affect the calculated molecular mass of the solute (too high,too low, no effect)? Explain your answer. (a) The thermometer uses actually read 1.4C too high.

chemistry

Lab on Determining hard water Not sure if I answered this currently, not completely sure how to explain either. If a student has a non-zero blank correction, but forgets to include that correction in his/her calculations:? a. Would his/her calculated [EDTA] be correct, too ...

chemistry

Lab on Determining hard water Not sure if I answered this currently, not completely sure how to explain either. If a student has a non-zero blank correction, but forgets to include that correction in his/her calculations:? a. Would his/her calculated [EDTA] be correct, too ...

Chemistry

Some of your reaction mixture splashed out of the beaker when you dropped the tablets into the acetic acid. How would this affect your measurements? Woud your final calculated mass of sodium bicarbonate in the tablet be artificially high or low as a result of this splashing?

Chem Will somebody Please help me

The Lab experiment we did today was to analyze an antacid tablets to determine the actual content of NaHCO3. Suppose I dropped the tablets into the beaker and some of the reaction mixture splashed out. Would my final calculated mass of sodium bicarbonate in the tablet be ...

Chemistry

some of the acetic acid splashed out the beaker when you dropped the tablets into the acetic acid. How would this affect your measurement? Would your final calculated mass of sodium bicarbonate in the tablet be artificially high or low as a result of this splashing?

chemistry

Molecular Mass by Freezing point Depression (Preliminary Lab) The following errors occurred when the above experiment was carried out. How would each affect the calculated molecular mass of the solute (too high,too low, no effect)? Explain your answer. (a) The thermometer uses...

Chemistry

Using Volumetric Glassware to Measure, Dilute,and Titrate Acid Solution 1)For each of the following procedural errors, indicate whether the calculated molarity of the HCl solution would be higher or lower than the actual molarity. Briefly explain. a)The NaOH titrant is ...

Chemistry

For each of the following experimental conditions determine whether molar mass would be: 1) too high, B) too low or C) unaffected. In each case, /explain/ how this result occurs a) after removing the flask from the water bath, the experimenter cools the flask to room ...

Chemistry

For each of the following experimental conditions determine whether molar mass would be: 1) too high, B) too low or C) unaffected. In each case, /explain/ how this result occurs a) after removing the flask from the water bath, the experimenter cools the flask to room ...

Chemistry

For each of the following experimental conditions determine whether molar mass would be: 1) too high, B) too low or C) unaffected. In each case, /explain/ how this result occurs a) after removing the flask from the water bath, the experimenter cools the flask to room ...

Science

For each of the following experimental conditions determine whether molar mass would be: 1) too high, B) too low or C) unaffected. In each case, explain how this result occurs a) after removing the flask from the water bath, the experimenter cools the flask to room temperature...

Chemistry

For each of the following experimental conditions determine whether molar mass would be: 1) too high, B) too low or C) unaffected. In each case, /explain/ how this result occurs a) after removing the flask from the water bath, the experimenter cools the flask to room ...

Chemistry help

The Lab experiment we did today was to analyze an antacid tablets to determine the actual content of NaHCO3. Suppose I dropped the tablets into the beaker and some of the reaction mixture splashed out. Would my final calculated mass of sodium bicarbonate in the tablet be ...

chemistry

Suppose that a student performing this experiment recorded the concentration of NaOH solution as 0.513 M, instead of the correct value of 0.531 M. Assuming there were no other errors, would each of the following experimental results be high, low, or unaffected by the error? ...

chemistry

When filling the buret with NaOH solution, you left an air bubble in the buret tip. The bubble was released durning your first KHP titration. Would the following technique error result in an erroneously high or reeoneously low calculated molarity of NaOH solution? explain ...

Chemistry

I just wanted to see if my answers made sense. 1. What effect would each of the following have on your calculated value of Kf (too high, too low, or no effect)? In each case explain your answer. a) There was a small bubble in the thermometer, causing all the temperature ...

Chem

Suggest two experimental errors which would result in too low a value for the acid EW. Explain how these errors result in a low value.

chem

What would happen to the specific heat if some of the warm metal shot were lost during the transfer to the calorimeter? Answer a. It would not affect the calculated value of specific heat b. It would cause the calculated value of specific heat to be artificially high c. It ...

Chem

Suppose the water sample has a relatively high percent of volatile solid material. How would this have affected the reported mass of: a. dissolved solids -- too high, too low, or unaffected? Explain. TDS will be unaffected b. total solids -- too high, too low, or unaffected? ...

Chemistry

1How would each of the following affect the accuracy of the calculated neutralizing power of antaid (too high, too low, no effect) explain a)The actacid tablet was not cut exactly in half before weighing b)The solution mixture of reacted antacid and excess HCL spattered out of...

Chemistry

1How would each of the following affect the accuracy of the calculated neutralizing power of antaid (too high, too low, no effect) explain a)The actacid tablet was not cut exactly in half before weighing b)The solution mixture of reacted antacid and excess HCL spattered out of...

Chemistry

1How would each of the following affect the accuracy of the calculated neutralizing power of antaid (too high, too low, no effect) explain a)The actacid tablet was not cut exactly in half before weighing b)The solution mixture of reacted antacid and excess HCL spattered out of...

Chemistry

1How would each of the following affect the accuracy of the calculated neutralizing power of antaid (too high, too low, no effect) explain a)The actacid tablet was not cut exactly in half before weighing b)The solution mixture of reacted antacid and excess HCL spattered out of...

chemistry

If the stockroom fails to dry the KHP to remove the waters of hydration, the student's calculated concentration for the standardized base will be: ____________ (low, high, or unaffected) A drop of NaOH is hanging from the buret tip before the titration of KHP. Once the student...

Chemistry

I did a lab on vinegar and titration. The question asks.. In the titration of acetic acid and NaOH the use of the color indicator mandates that excess base be present to detect the reading endpoint. Will this cause the calculated and reported mass percent of acetic acid in ...

Chemistry

a student used a 0.358 g sample of Alka-Seltzer and the mass of CO2 was found to be 0.102 g. Based on this result, answer the following questions: Determine the mass of NaHCO3 that produced the CO2 in the experiment. Determine the % mass of NaHCO3 in the sample. Determine the ...

chemistry

The following errors occurred when the experiment was carried out. How would each affect the calculated molar mass of the solute(too high, too low, no effect)? Explain. a. The thermometer used actually read 1.4 centigrade too high. b. some of the solvent was spilled before the...

Chemistry

Performing the same experiment described on your lab manual, a student used a 0.358 g sample of Alka-Seltzer and the mass of CO2 was found to be 0.102 g. Based on this result, answer the following questions: Determine the mass of NaHCO3 that produced the CO2 in the experiment...

Chem 151

Would my calculated molarity of HOAc in vinegar be too high, low, or unchanged if a) i forgot to rinse wet buret with vinegar b)delivered vinegar into a wet flask c)used a buret with a broken tip Any help please!!!

chemistry

If the stockroom fails to dry the KHP to remove the waters of hydration, the student's calculated concentration for the standardized base will be (low, high, or unaffected) A drop of NaOH is hanging from the buret tip before the titration of KHP. Once the student begins the ...

chemistry

If the stockroom fails to dry the KHP to remove the waters of hydration, the student's calculated concentration for the standardized base will be (low, high, or unaffected) A drop of NaOH is hanging from the buret tip before the titration of KHP. Once the student begins the ...

Chem

Interpretation of the data plots consistently show that the freezing points of three solutions are too high. As a result of this "misreading of the data," will the reported molar mass of the solute be too high, too low, or unaffected? Explain please.

chem

An aspirin tablet weighing 0.650 g has been analyzed and contains 68.2 % ASA (180.16 g/mol) by mass. A student dissolved the tablet in hot NaOH and the cooled solution was diluted with DI water to the mark in a 250 mL volumetric flask. Exactly 3.00 mL of the solution was ...

Chemistry

"Hi there! So I have a chemistry project due in a few hours. I need to find the molar mass of a specific antacid tablet, but all I know is that the tablet is made up of 550mg CaCO3 and 110mg Mg(OH)2 I also know that the tablet has a mass 1.35g. How do I find the molar mass of ...

chemistry help-

Which of the following has the lowest second ionization energy? a. Ca b. Ne c. K d. Ar e. Na Arrange the following set of ions in order of increasing atomic radii. Ca2+, Cl-, K+, P3-, S2- a. Ca2+ < K+ < P3- < S2- < Cl- b. K+ < Cl- < Ca2+ < S2- < P3- c. ...

chem

A student determines the composition of a copper chloride compound. Tell whether each of the situations described below would cause the student’s experimental value for the percent of copper in the compound to be greater than less than, or unchanged from the theoretical ...

Chemistry

Titration of an Unknown Acid... What effect on the molar mass of the unknown acid would each of the following have... Would it make the calculated molar mass high, low, or would it have no effect? 1. Adding 5 drops of phenolphthalein instead of 1 drop... Answer: No effect. 2. ...

Chemistry

What would be the effect on the percent by mass of iron (whether it would be higher, lower or unchanged from what it should be) calculated to be in the unnkown sample and why if the sample contained some Fe3+ as well as some Fe2+

Chemistry

Pharmacists sell tablets containing magnesium hydroxide, Mg(OH)2, to combat indigestion. A student carried out an investigation to find the percentage by mass of Mg(OH)2 in an indigestion tablet. The student reacted the tablet with dilute hydrochloric acid. Mg(OH)2(s) + 2HCl(...

Chemistry

1. If a student forms CaCO3 from the presence of carbon dioxide, but continued with the trial anyway, how would this affect his/her calculations (too high, too low, or no effect)? Explain your answers. a) The volume of NaOH required for the back titration. b) The calculated ...

Chemistry

I got think I got the following questions almost figured, but I just want someone to make sure that I am correct. 1) The whole experiment involves using the ideal gas law to predict the molar mass of an unknown liquid. The formula is molar mass of liquid = gR(0.0821)T(...

chemistry

A student performed the freezing point depression experiment according to directions but mistakenly recorded the mass of lauric acid as 8.300g instead of8.003g. The calculated molar mass of the unknown acid will be GREATER/LESS than true value b/c mass of lauric acid appears ...

science

objects of different masses are suspended from a height. which combination of features will have the greatest gravitational potential energy low mass low height low mass high height high mass high height high mass low height

chemistry

How will the relative number of moles of Mg and O be affected if the following procedural errors are made? Briefly explain (1) the crubile is not brought to constatn mass before the Mg is added. (2) water is not added after the first heating of Mg, and the entire solid in the ...

chemistry

If the freezing point of the solution had been incorrectly read 0.3degrees C lower than the true freezing point, would the calculated molar mass of the solute be too high or too low? Explain.

chemistry

An aspirin tablet weighing 0.502 g has been analyzed and contains 68.2 % ASA (180.16 g/mol) by mass. A student dissolved the tablet in hot NaOH and the cooled solution was diluted with DI water to the mark in a 250 mL volumetric flask. Exactly 3.00 mL of the solution was ...

chemistry

An aspirin tablet weighing 0.502 g has been analyzed and contains 68.2 % ASA (180.16 g/mol) by mass. A student dissolved the tablet in hot NaOH and the cooled solution was diluted with DI water to the mark in a 250 mL volumetric flask. Exactly 3.00 mL of the solution was ...

chem

An aspirin tablet weighing 0.650 g has been analyzed and contains 68.2 % ASA (180.16 g/mol) by mass. A student dissolved the tablet in hot NaOH and the cooled solution was diluted with DI water to the mark in a 250 mL volumetric flask. Exactly 3.00 mL of the solution was ...

chemistry

An aspirin tablet weighing 0.475 g has been analyzed and contains 68.2 % ASA (180.16 g/mol) by mass. A student dissolved the tablet in hot NaOH and the cooled solution was diluted with DI water to the mark in a 250 mL volumetric flask. Exactly 3.00 mL of the solution was ...

Chem.

An aspirin tablet weighing 0.400 g has been analyzed and contains 68.2 % ASA (180.16 g/mol) by mass. A student dissolved the tablet in hot NaOH and the cooled solution was diluted with DI water to the mark in a 250 mL volumetric flask. Exactly 3.00 mL of the solution was ...

Chemistry

An aspirin tablet weighing 0.475 g has been analyzed and contains 68.2 % ASA (180.16 g/mol) by mass. A student dissolved the tablet in hot NaOH and the cooled solution was diluted with DI water to the mark in a 250 mL volumetric flask. Exactly 3.00 mL of the solution was ...

Chemistry

Experiment 10: Which Fuels provide the most heat? There are many possible sources of error in this experiment. List three that you can think of. Would each error have a large effect, a medium effect, or a small effect on the calculated heat content of a fuel? Also indicate ...

college chemistry

An aspirin tablet weighing 0.502 g has been analyzed and contains 68.2 % ASA (180.16 g/mol) by mass. A student dissolved the tablet in hot NaOH and the cooled solution was diluted with DI water to the mark in a 250 mL volumetric flask. Exactly 3.00 mL of the solution was ...

Analytical Chemistry

1. If the unknown solid were not dried before analysis, would the calculated percent of KHP be too high or too low? Explain

APChem

If an air bubble passes unnoticed through the tip of a buret during a titration (where a weak nonvolatile acid HA is the analyte) , the calculated molar mass of HA would be too high, too low, or not affected? I thought it would be too high, since an air bubble in the buret ...

chem

An aspirin tablet weighing 0.475 g has been analyzed and contains 68.2 % ASA (180.16 g/mol) by mass. A student dissolved the tablet in hot NaOH and the cooled solution was diluted with DI water to the mark in a 250 mL volumetric flask. Exactly 3.00 mL of the solution was ...

Chemistry

Some antacid tablets actually contain a mixture of calcium carbonate and magnesium hydroxide (though they usually have the same “strength” as those that only contain CaCO3). If this had been the case for the antacid you tested, but you still assumed it only contained CaCO3...

physics

what kind of errors of the procedural, systematic, and random errors could possibly occur while finding the mass of a burning candle by placing a candle on an electronic scale and lighting it?

probabilityv

A school's administrators are concerned about absenteeism at their school and the e ect it has on students' grades. The following data were compiled, based on a sample of students. Student's Absent Medium Absent Grade Infrequently Absent Frequently Low 1 9 8 Medium 6 35 7 High...

Chemistry help

Hey...I just want to make sure my answers to these questions are correct... 1. d=2.507 g/1.22 mL = 2.054918033 g mL^-1 explain how both the rules for significant figures and the random error calculation (p(d) = +-0.34 g mL^-1) indicate that the digits after the hundreths place...

science-chem- theory questions

please, help me.. i think i know the answers, but i just want to make sure! i'd love your feed back :) 1) an air bubble is trapped in the tip of a buret before a titration. during the titration, the bubble is passed from the buret tip. will the reported volume of titrant used ...

Chemistry

Would the percent yield of Ni(NH3)nCl2 be high, lower, or unchanged if you made the following procedural changes? a) You performed the synthesis reaction at 100 degrees instead of 60 degrees b) you dissolved the NiCl2*6H2O in 50 mL of distilled water instead of 10mL c) You did...

Chemistry

I am totally confused. Does my answer make sense or do I need to start over? The more I read it the more I doubt my answer. I am also confused when it states Please be specific. Is it looking for a specific number for the temperature and pressure or just the conditions? Under ...

Chemistry

A calorimetric determination of specific heat and enthalpy of solution was performed. How would each of the following procedural changes affect (higher than the correct value, lower than the correct value, or no change) the value of the specific heat of the metal determined in...

chemistry

A) solve for the number of grams of Ca2+ ion in a solution prepared by adding 1 gram of calcium oxalate powder to 100 mL at pH 9. (B) explain what happens to the dissolved Ca2+ calculated before if you reduce the pH of this solution to 2.

Chemistry

If your partner did not take into account the vapor pressure of water when calculating the moles of hydrogen produced, would the mass of Mg that was calculated at the end of the experiment be too high or too low? Why?

physics

which way do electric-field lines point, from high to low potential or from low to high? Explain please

HARD PHYSICS

which way do electric-field lines point, from high to low potential or from low to high? Explain please

college chem

Mg and O lab how will the relative number of moles of mg and o be affected if the following procedural errors are made? a)crucible is not brought to constant mass before the Mg is added. b)water is not added after the first heating of Mg, and the entire solid in the crucible ...

college chemistry

Mg and O lab how will the relative number of moles of mg and o be affected if the following procedural errors are made? a)crucible is not brought to constant mass before the Mg is added. b)water is not added after the first heating of Mg, and the entire solid in the crucible ...

Chemistry

How would each of the folowing affect the accuracy of the calculated neutralizing power of the antacid (too high, too low, no effect)? Explain why. a) Titration flask was wet with distilled water b) The burette was initally not rinsed with 0.10M NaOH and some water was left in...

chemistry

would the molar mass of a volatile liquid, calculated using the procedure in this experiment, be incorrectly high, incorrectly low, or unaffected by the following? You forgot to measure the volume of the flask, so you used the volume printed on the g=flask for your ...

chem

would the molar mass of a volatile liquid, calculated using the procedure in this experiment, be incorrectly high, incorrectly low, or unaffected by the following? You forgot to measure the volume of the flask, so you used the volume printed on the g=flask for your ...

Physics

For each of the following scenarios, indicate whether the oscillation period of the block becomes shorter, longer or remains unchanged. Note: you must clearly mark your answer (for example, highlight it in red) from the multiple-choice list below and you must provide an ...

Chemistry

What effect on the molar mass of the unknown acid would each of the following have-that is-would it make the calculated molar mass high, low, or would it have no effect? 1. Adding 5 drops of phenolphthalein instead of 1 drop. 2. Using a standard NaOH solution that has been ...

Science

Which of the following would have the greatest force? (1 point) 1. an object with low mass accelerating slowly 2. an object with low mass accelerating quickly 3. an object with high mass accelerating quickly 4. an object with high mass accelerating slowly (i picked 3 but im ...

ap chemistry

what would have happened to the calculated molar mass if some benzoic acid was spilled before adding it to the lauric acid? also, what would have happened to the calculated molar mass if the thermometer used actually read 1.4C too high I NEED HELP PLEASE THANKS

Math

4.The following table shows the high and low temperatures predicted for Dallas during the week beginning Monday, August 29 2011. Which day has the biggest difference between the high and low temperatures? A.Mon D.Tue C.Wed D.Sun Monday High temp 106 Low temp 79 Tuesday High ...

chemistry

1. When performing this experiment, a student mistakenly used impure KHP to standardize the NaOH solution. If the impurity is neither acidic nor basic, will the percent by mass of acetic acid in the vinegar solution determined by the student be too high or too low? Justify ...

8th grade physical science

A student measured the mass of an object and obtained the following results: 10.1 g, 11.0 g, and 10.5 g. The actual mass of the object was 10.6 g. a. What should the student report as the mass of the object? My answer: The student should report the mass as 10.5, because that ...

Chemistry

Describe how you could find the % by mass of water in the hydrate CuSO4Ÿ5H2O assuming that you did not already know the formula. Be specific and list the laboratory procedural steps you would take in the order that you would perform them.

Science

which of the following would have the greatest force? •an object with low mass accelerating slowly •an object with low mass accelerating quickly •an object with high mass accelerating quickly •an object with high mass accelerating slowly (and yes i go to to conexus, ...

Chemistry HELP!

a) How would a too low molarity of NaOH affect the calculated molar mass of the unknown acid? b) How would it affect the calculated Ka of the unknown acid? If mistakenly calibrated pH meter using pH6 buffer instead of pH7 buffer, all ph meter readings were too low.... how does...

Chemistry HELP!

a) How would a too low molarity of NaOH affect the calculated molar mass of the unknown acid? b) How would it affect the calculated Ka of the unknown acid? If mistakenly calibrated pH meter using pH6 buffer instead of pH7 buffer, all ph meter readings were too low.... how does...

CHM

Some of the cyclohexane solvent vaporized during the temperature versus time measurement. Will this loss of cyclohexane result in its freezing point being recorded as too high, too low or unaffected? Explain. Please someone explain this to me I don't understand it...Thank you

chemistry URGENT

I need someone to check my answers to make sure that I have the correct answers. (3 Part Question) Two students each measure the density of a quartz sample three times: Student A Student B 3.20 g/mL 2.82 g/mL 2.58 g/mL 2.48 g/mL 2.10 g/mL 2.59 g/mL mean 2.63 g/mL 2.63 g/mL 1. ...

Chemistry

Can you help me with the explaining and identifying below? A found a link in which the lab is similar to what I did in class. Here it is: icn2. umeche. maine. edu /newnav /NewNavigator /Labs /Deter_1493.htm thanks for the help! Indicate whether the following conditions would ...

chemistry

Titration was used to determine the molarity of acetic acid in vinegar. A primary standard solution of KHP was used to standardize the NaOH. 1. When performing this experiment, impure KHP was used to standardize the NaOH solution. If the impurity is neither acidic or basic, ...

chemistry

(A) A student performed the freezing point depression experiment according to directions but mistakenly recorded the mass of lauric acid as 8.300 g instead of 8.003 g. The calculated molar mass of the unknown acid will be ___________ than the true value, because the mass of ...

chemistry

A) A student performed the freezing point depression experiment according to directions but mistakenly recorded the mass of lauric acid as 8.300 g instead of 8.003 g. The calculated molar mass of the unknown acid will be ___________ than the true value, because the mass of ...

health

Which type of exercise increases fat loss? A. High-intensity B. High-duration C. High-duration/low-intensity D. High-intensity/low-duration im stuk on this question and i can't get any information about it inside my head.weird can any one explain to me simple words please

Statistics for Decision

Calorie Level Fiber Type High Calorie Low Calorie Totals High Fiber 18 4 22 Medium Fiber 23 6 29 Low Fiber 12 21 33 Totals 53 31 84 1. What is the probability that the cereal would be high calorie? In other words, what is P(high calorie)? 2. What is the probability that the ...

Chemistry

If I was to test a set of unkowns in each of the following categories (located below). What would be my best method to figure out the unknowns I was given? --I was thinking a flow chart starting with high/low conductivity, but I'm not sure where to go from there? K+ salts ...

chemistry

A TUMS tablet was dissolved in 110.00 ml of 0.1022 M HCl and analyzed for CaCO3 according to the procedure described in the lab manual. It took 7.48 ml of 0.1005 M NaOH to reach the endpoint. Calculate the mass of CaCO3 in TUMS tablet to the correct number of significant ...

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. 21
  22. 22
  23. 23
  24. 24
  25. 25
  26. 26
  27. 27
  28. 28
  29. 29
  30. 30
  31. 31
  32. 32
  33. 33
  34. 34
  35. 35
  36. 36
  37. 37
  38. 38
  39. 39
  40. 40
  41. 41
  42. 42
  43. 43
  44. 44
  45. 45
  46. 46
  47. 47
  48. 48
  49. 49
  50. 50
  51. 51
  52. 52
  53. 53
  54. 54
  55. 55
  56. 56
  57. 57
  58. 58
  59. 59
  60. 60
  61. 61
  62. 62
  63. 63
  64. 64
  65. 65
  66. 66
  67. 67
  68. 68
  69. 69
  70. 70
  71. 71
  72. 72
  73. 73
  74. 74
  75. 75
  76. 76
  77. 77
  78. 78
  79. 79
  80. 80
  81. 81
  82. 82
  83. 83
  84. 84
  85. 85
  86. 86
  87. 87
  88. 88
  89. 89
  90. 90
  91. 91
  92. 92
  93. 93
  94. 94
  95. 95
  96. 96
  97. 97
  98. 98
  99. 99
  100. 100