# Physics / Heat Transfer

78,853 results

**Physics - Heat Transfer**

I am trying to calculate heat transfer between two objects. The units are as follows: m1: 100 g t1: 10 degrees C spec heat 1: 1.00 cal/g degree C m2: 200 g t2: 90 degrees C spec heat 2: 0.2 cal/gm degree C I set Q1 = Q2 m1 x spec heat 1 x delta T1 = m2 x spec heat 2 x delta T2...

**heat transfer**

a. Steam at 230oC flows through a steel pipe ( = 15/. ) whose inner and outer diameters are 9 cm and 10 cm, respectively in an environment at 15oC. The pipe is insulated with 5 cm thick fiberglass ( = 0.035/. ). The given heat transfer coefficients on the inside and ...

**Physical Science**

QUESTION GIVEN---Thermal conductors don’t have to be hot to transfer heat. According to Ch.16, explain a situation when an ice cube would still transfer heat to another object it is in contact with. MY ANSWER---Because, the ice may be trying to transfer cold, but if the ...

**heat transfer**

True or false (i) Steel is better conductor of heat than bricks. (ii) Radiations are ultrasonic waves. (iii) Black body is having emissivity 2. (iv) Natural convection do not need any external source for fluid flow. (v) Fins cause increase in rate of heat transfer

**physical science**

hermal conductors don’t have to be hot to transfer heat. According to Ch.16, explain a situation when an ice cube would still transfer heat to another object it is in contact with.

**physics-heat transfer**

energy conscious homeowners often insulate their homes. one form of insulation is thick pads of loosely packed glass fibres.explain how these pads reduce heat transfer. how do thick curtains help reduce heat loss from the windows of a house? builders often insulate parts of ...

**Energy Transfer and Heat flow**

1. What is entropy? 2.With every energy transfer, what form of energy is always released? I think 2 is Heat? not sure about 1

**Physics**

How is it possible for a fabric (textile) to conduct the 3 modes of heat transfer (conduction, convection and radiation?) i've been searching for a possible experiment to investigate this but no luck Anything with a higher temperature than its surroundings can move that energy...

**Energy Transfer and Heat flow**

1. What is entropy? 2.With every energy transfer, what form of energy is always released? I think 2 is Heat?

**Thermodynamics**

Can I have any energy transfer as heat transfer that is 100% available? Explain with equation

**heat transfer**

can i ask u some question? about the heat transfer..1st question ,On a hot summer day, a student turns his fan on when he leaves his room in the morning. When he returns in the evening, will the room be warmer or cooler than the neighboring rooms? Why? Assume all the doors and...

**Science**

A man relaxes in his hot tub after a long day at work. hid ody temperature is 98.6 F. The temperature of the water in the hot tub is 102 F. How does heat transfer A) Heat does not transfer between his body and the water. B) Heat transfers to his body from the water by ...

**Thermodynamics**

A lawnmower tractor engine produces 18hp using 40kW of heat transfer from burning fuel. Find the thermal efficiency and the rate of heat transfer rejected to the ambient. I converted the power to 13.24kW then found the efficiency by dividing 13.24kW by 40kW but the answer is ...

**heat transfer**

a plane wall of thickness 10 cm and thermal conductivity of 25w/m degree centigrade has a volumetric heat generation of.3*10 to the power 16w/mque .the wall is insulated on one side & other side is exposed to fluid at90 degree temperature . determine maximum temperature in ...

**surface energy budget**

I'm give the following data: Q*, QG, QH, QE for a 24-hour period, i'm required to plot these 4 data on the same graph, which I've already done. I'm also required to compute these 24 hours totals - transfer of sensible heat to the atmomsphere - transfer of latent heat to the ...

**Physics -- check answers please**

1. Which of the following best shows the transfer of heat by radiation? my answer: c 2. Which of the following best shows the transfer of heat by convection? my answer: b 3. Water has specific heat of 4200 J per kilogram per degree celsius. This means that 2 kg of water will ...

**Physics**

Just as no mechanical device can be 100% efficient, no heat engine can transfer 100% of its heat to a single object. Some of the heat energy must be wasted (released into the environment). We have a heat engine that produces 150 J of heat, does 40 J of work, and emits 110 J ...

**Science**

which of the following illustrates conduction as a mode of heat transfer 1 point a microwave oven produces electromagnetic waves that transfer to the food in the form of head leaving a metal spoon in a bowl of hot soup will make the spoon at a well pasta rises and falls with ...

**science**

which of the following illustrates conduction as a mode of heat transfer 1 point a microwave oven produces electromagnetic waves that transfer to the food in the form of head ** leaving a metal spoon in a bowl of hot soup will make the spoon at a well pasta rises and falls ...

**Science**

What does an Electromagnetic wave transfer into?? It can transfer to heat, electical power, mechanical power, or light.

**Physics / Heat Transfer**

How much heat must be removed from a 200 g block of copper to lower its temperature from 302 oF to 68 oF? Specific heat of copper: c = 0.092 kcal/(kg K) a. 2.4 kcal b. 2400 kcal c. 18.4 kcal d. 12 kcal e. 26 kcal

**Science**

of the following illustrates conduction as a mode of heat transfer 1 point a microwave oven produces electromagnetic waves that transfer to the food in the form of head leaving a metal spoon in a bowl of hot soup will make the spoon at a well •• pasta rises and falls with ...

**HEAT TRANSFER**

The door of a domestic refrigerates has an area of 1.7 m2 & it basically consists of a thin metal sheet with a 25 mm thick layer of insulation on the inside. The thermal conductivity of this insulation is 0.25 W / m-deg & heat transfer on each side of the door is 10 W / m2-deg...

**thermodynamics**

3.4 A heat engine operates between two heat reservoirs with temperatures of 560 and 280 K a) The heat engine itself has a temperature of 560 K during heat addition from the 560 K reservoir and a temperature of 280 K during heat rejection to the 280 K reservoir. The thermal ...

**Physics -- check answers please**

1. what is 67 K equivalent to in Celsius? answer: -206.15 C 2. what is 458.9 Celsius in K? answer: 732.05 3. heat is closely related to: a)temperature b)thermal energy c)force d)convection currents answer: b 4. What does a low efficiency score reveal about a home in terms of ...

**Physics -- check answers please**

1. what is 67 K equivalent to in Celsius? answer: -206.15 C 2. what is 458.9 Celsius in K? answer: 732.05 3. heat is closely related to: a)temperature b)thermal energy c)force d)convection currents answer: b 4. What does a low efficiency score reveal about a home in terms of ...

**physics**

A transfer of heat occurs with a pot of 8.0 kg of water that changes from 400 degrees kelvin to 320 degrees kelvin. How much heat is absorbed or given off?

**physics**

the mass of the water is 131 kg and its initial temperature is 24.2°C, how much energy must the water transfer to its surroundings in order to freeze completely? The specific heat of water is 4186 J/kg·K, and the latent heat of fusion is 333 kJ/kg

**physics**

(a) How much heat (J) flows from 1.00 kg of water at 46.0°C when it is placed in contact with 1.00 kg of 18°C water in reaching equilibrium? (b) What is the change(J/K) in entropy due to this heat transfer? (c) How much work (J) is made unavailable, taking the lowest ...

**physics**

(a) How much heat (J) flows from 1.00 kg of water at 46.0°C when it is placed in contact with 1.00 kg of 18°C water in reaching equilibrium? (b) What is the change(J/K) in entropy due to this heat transfer? (c) How much work (J) is made unavailable, taking the lowest ...

**physics**

(a) How much heat (J) flows from 1.00 kg of water at 46.0°C when it is placed in contact with 1.00 kg of 18°C water in reaching equilibrium? (b) What is the change(J/K) in entropy due to this heat transfer? (c) How much work (J) is made unavailable, taking the lowest ...

**physics**

(a) How much heat flows from 1.00 kg of water at 46.0°C when it is placed in contact with 1.00 kg of 18°C water in reaching equilibrium? (b) What is the change in entropy due to this heat transfer? (c) How much work is made unavailable, taking the lowest temperature to be 18...

**physics**

(a) How much heat (J) flows from 1.00 kg of water at 46.0°C when it is placed in contact with 1.00 kg of 18°C water in reaching equilibrium? (b) What is the change(J/K) in entropy due to this heat transfer? (c) How much work (J) is made unavailable, taking the lowest ...

**science**

The total energy of motion in the molecules is called POTENTIAL ENERGY. TEMPERATURE is the average amount of energy of motion in the molecules of a substance. A THERMOMETER is a thin glass tube with a bulb on one end that contains a liquid,usually mercury or colored alcohol. ...

**Physics**

9. In which system is heat usually transferred from the cooler part to the warmer part? a. A stove as it heats up water. b. A refrigerator that is running. c. An electric fan that is running. d. None of the above, because it is impossible to transfer heat in this manner.

**physics**

into which part of the fridge-freezer will the rate of heat transfer be greater?

**physics**

define black body, emissivity, solar constant in relation to heat transfer.

**chemistry**

How many grams of methane must be combusted to heat 1.05 of water from 24.0 to 89.0, assuming as a product and 100% efficiency in heat transfer?

**Chemistry**

How many grams of methane must be combusted to heat 1.05 of water from 24.0 to 89.0, assuming as a product and 100% efficiency in heat transfer?

**Science**

What is the main source of energy for the water cycle? What type of heat transfer does this provide? The sun is the main source driving it: Sun heats water, water evaporates. What type of heat transfer does it provide? I think that it is radiation, but I'm not completely sure.

**Heat Transfer**

Derive the general heat conduction equation in cylindrical coordinates by applying the first law to the volume element.

**physics-heat transfer-urgent pls**

Calculate the energy absorbed when 8.5g of ice is melted at 0 Celsius. thank you

**Physics**

A 0.300 kg iron horseshoe that is initially at 550°C is dropped into a bucket containing 19.4 kg of water at 21.1°C. What is the final equilibrium temperature (in °C)? Neglect any heat transfer to or from the surroundings. Do not enter units. I'm taking (specific heat of ...

**science**

3. One calorie is the energy required to raise one gram of water one degree Celsius. Since we use the joule as the standard measurement of energy, 1 calorie = 4.184 J. If a pot is placed on the stove with 2.4 liters of water at a temperature of 27°C, how many joules are ...

**Chemistry HEAT OF FUSION**

What is the final temperature, in oC, after a 15.0 g piece of ice, at 0oC, is placed in a styrofoam cup with 128 g of water initially at 74.0oC. Assume there is no transfer of heat to or from the surroundings. The specific heat of water = 4.184 JK-1g-1 The heat of fusion of ...

**Physics**

what type of heat transfer does solar hot water heating use? (conduction, convection, radiation)

**Physics**

A person's body is covered with 1.4 m2 of wool clothing. The thickness of the wool is 1.3 10-3 m. The temperature at the outside surface of the wool is 14°C, and the skin temperature is 36°C. How much heat per second does the person lose due to conduction? You have a nice ...

**(SOL PS.7)(VBO 8.4.12)**

DESIGN AN EXPERIMENT RELATE TO HEAT TRANSFER DESIGN AN INBESTIGATION FROM A TESTABLE QUESTION RELATED TO HEAT TRANSFER, OR SOUND (SOL PS.8)(VBO8.5.10 DESIGN AN EXPERIMENT FROM A TESTAN=BLE QUESTION RELATED TO SOUND

**Physics**

Heat energy is the energy associated with changes in internal energy. If no phase changes occur, the transfer of heat energy is accompanied by a change in?

**Chemistry**

What is the final temperature, in oC, after a 27.0 g piece of ice, at 0oC, is placed in a styrofoam cup with 120 g of water initially at 70.5oC. Assume there is no transfer of heat to or from the surroundings. The specific heat of water = 4.184 JK-1g-1 The heat of fusion of ...

**linguistics**

Describe what contrastive analysis is and what transfer is(both positive transfer and negative transfer)?

**linguistics**

Describe what contrastive analysis is and what transfer is(both positive transfer and negative transfer)?

**physics - Heat transfer**

A round scar of area 'A' is formed on the chest of a man of temperature 37C. The rate of heat radiated from this scar is 1% more than that from the remaining part of the body. What will be the excess temperature at this scar over other parts of the body?

**Heat Transfer**

The inside wall of a furnace needs to be designed such that it transmits a maximum heat flux of 600 W/m2 . The inside wall temperature will be 1100°C and the outside temperature will be 150°C. We have two different types of bricks from which we can make the wall: Type 1: 24 ...

**science**

The total energy of motion in the molecules of a substance is called? ?is the average amount of energy of motion in the molecules of a substance. A ? Is a thin glass tube with a bulb on one end that contains a liquid usually mercury or a colored alcohol. The energy transferred...

**chemistry**

How much ice is required to cool a 15.0oz drink from 71 F to 34 F, if the heat capacity of the drink is 4.18 J/g*C ? (Assume that the heat transfer is 100% efficient.)

**chemistry**

Islands in the middle of the oceans (for example, Great Britain, Hawaii, Bermuda) tend to have more stable climates with smaller temperature fluctuations than regions of the same mass surrounded by land (for example, continents). Use your knowledge of heat energy, specific ...

**Material Science**

A polystyrene ice chest contains 3 kg of ice at 0 degrees Celsius. Triangle H for melting = 3.34 x 10 to the 5 power J/kg p = 1000 kg/m cubed, CP =4190 J/ (kg K). Heat transfer is limited by conduction (k=0.06W/m K)) from the outside wall at 30 degrees Celsius. This means that...

**Heat Transfer**

A 1 m square verticalplate is heated to 300 deg C and placed in room air at 25 Deg C. calculate the heat loss from the one side of the plate

**Physics**

A 0.1134kg spherical meteor of diameter 3 cm enters the earth’s atmosphere at an elevation of 121920m with a velocity of 13411.2 m/s. The meteor’s temperature is -73.15˚C. The specific heat at constant volume (Cv) of the meteor is 800 J/kg˚C. (a) If the meteor has a ...

**Chemistry II**

Liquid sodium can be used as a heat transfer fluid. It's vapor pressure is 40.0 torr @ 633 degrees C and 400.0 torr @ 823 degreees C. Calculate it's heat vaporization.

**physics**

Putting a lid on a boiling pot greatly reduces the heat transfer necessary to keep it boiling. Explain why

**Physics**

A cylinderical brass rod with a radius of 2.10 cm and length of 1.50 m is placed in a fire with temperature of 490 deg. C. If the other end of the rod is at a temperature of 33 deg. C, what is the rate of heat transfer through the rod (ignore any heat loss from the sides of ...

**physics**

A combination of .403 kg of water at 45.1 C, .471 kg of aluminum at 41.1 C, and .307 kg of copper at 50.4 C is mixed in an insulated container and allowed to come to thermal equilibrium. Determine the final temperature of the mixture. Neglect any energy transfer to or from the...

**Heat Transfer**

1.The physical significance of ....... is that it tells us how fast heat is propogated or it diffuses through a material during changes of temperature with time. 2. According to Krichoff's law in thermal equilibrium absorptivity is equal to ........ 3.In conduction heat ...

**Physics**

A steam engine's boiler completely converts 155 kg of water to steam. This process involves the transfer of 3.5 x 10^8 J by heat. If steam escaping a safety valve does 1.76 x 10^8 J of work against the outside atmosphere, what is the net internal energy of the water-steam ...

**physics--heat**

a piece of glass is 6mm thick and the coefficient of thermal conductivity of this glass is K=0.75Wm^-1K^-1. if we add a 2nd identical piece of glass separated by an airgap of 5cm, the total thermal conduction will be reduced. what is the ratio of heat transfer by conduction ...

**CHEMISTRY**

I know this question is already on here but the answer wasn't helpful to me. Liquid Sodium can be used as a heat transfer fluid. Its vapor pressure is 40.0 torr at 633 C and 400.0 torr at 823 C. Calculate its heat of vaporization.

**Physics**

Imagine a vessel containing 2.000 kg of liquid whose specific heat equals 1.50 kcal/kg/°c. Suposse that all of the liquid exists at its vaporization temperature of 450 k. We transfer 150 cal of heat energy to the liquid. What is the temperature of the liquid in the vessel ...

**Heat Transfer**

Fill In the Blanks: 1.The physical significance of ....... is that it tells us how fast heat is propogated or it diffuses through a material during changes of temperature with time. 2. According to Krichoff's law in thermal equilibrium absorptivity is equal to ........ 3.In ...

**Physics**

A 0.300 kg iron horseshoe that is initially at 550°C is dropped into a bucket containing 19.4 kg of water at 21.1°C. What is the final equilibrium temperature (in °C)? Neglect any heat transfer to or from the surroundings. Do not enter units.

**Heat Transfer**

A hollow tube having an inside diameter of 2.5 cm and a wall thickness of 0.4 mm is exposed to an environment at h=100 W/m2¨¬C and T¡Ä =40¨¬C. What heat generation rate in the tube will produce a maximum tube temperature of 250¨¬C for k =24 W/m¨¬C?

**Heat Transfer**

A hollow tube having an inside diameter of 2.5 cm and a wall thickness of 0.4 mm is exposed to an environment at h=100 W/m2¨¬C and T¡Ä =40¨¬C. What heat generation rate in the tube will produce a maximum tube temperature of 250¨¬C for k =24 W/m¨¬C?

**physics**

A monatomic ideal gas (Cv = 3/2 R) undergoes an isothermal expansion at 300 K, as the volume increased from .05 m^3 to .15 m^3 The final pressure is 130kPa The heat transfer to the gas, in kJ, is closest to?

**Physics- Help!!**

1. What is the heat required in kilocalories to convert 2 kg of ice at 0°C completely into steam at 100°C? (I thought it was 2000 kilo cals but I think I'm wrong??) a. 80 Calories b. 1440 Calories c. 4186 Calories d. 540 Calories 2. A gaseous refrigerant undergoes ...

**Chemistry**

When ice melts, it absorbs 0.33 per gram. How much ice is required to cool a 11.0 drink from 75 to 37, if the heat capacity of the drink is 4.18 ? (Assume that the heat transfer is 100 efficient.)

**Chemistry**

When ice melts, it absorbs 0.33 per gram.How much ice is required to cool a 12.0 drink from 72 to 37, if the heat capacity of the drink is 4.18 ? (Assume that the heat transfer is 100 efficient.)

**Material Science**

A polystyrene ice chest contains 3 kg of ice at 0 degrees Celsius. Triangle H for melting = 3.34 x 10 to the 5 power J/kg p = 1000 kg/m cubed, CP =4190 J/ (kg K). Heat transfer is limited by conduction (k=0.06W/m K)) from the outside wall at 30 degrees Celsius. This means that...

**Chemistry I**

When ice melts, it absorbs 0.33 kJ per gram. How much ice is required to cool a 24.0 fluid ounce drink from 75°F to 35°F, if the heat capacity of the drink is 4.18 J/g·°C? (Assume that the heat transfer is 100% efficient.)

**heat transfer**

what are Biot & Fourier members?

**physics**

The formation of condensation on a glass of ice water causes the ice to melt faster than it would otherwise. If 7.40 g of condensation forms on a glass containing water and 210 g of ice, how many grams will melt as a result? Assume no other heat transfer occurs. Use the heat ...

**physics**

The formation of condensation on a glass of ice water causes the ice to melt faster than it would otherwise. If 7.40 g of condensation forms on a glass containing water and 210 g of ice, how many grams will melt as a result? Assume no other heat transfer occurs. Use the heat ...

**physics**

Which of the following is a True Statement? PLEASE EXPLAIN ANSWER A) It is possible for heat to flow spontaneously from a hot body to a cold one of from a cold one to a hot one, depending on whether or not the process is reversible or irreversible. B) It is impossible to ...

**Physics - Unit Conversion**

I am trying to calculate heat transfer between two objects. The units are as follows: mass: grams specific heat: cal/gm degree celsius temperature: degree celcius My numbers aren't working out and I know how to do the problem. So, what's the deal with the gm. Is that gram mass...

**physics**

The formation of condensation on a glass of ice water causes the ice to melt faster than it would otherwise. If 8.80 g of condensation forms on a glass containing water and 170 g of ice, how many grams will melt as a result? Assume no other heat transfer occurs. Use the heat ...

**physics**

The formation of condensation on a glass of ice water causes the ice to melt faster than it would otherwise. If 8.80 g of condensation forms on a glass containing water and 170 g of ice, how many grams will melt as a result? Assume no other heat transfer occurs. Use the heat ...

**physical science**

How do heat and work transfer energy?

**thermodynamic**

what is the difference between thermodynamics and heat transfer

**Heat Transfer**

Define Thermal diffusivity law?

**heat transfer**

thermal conductivity of solids depends on ??

**science**

explain to to transfer heat from a electric stove?

**Math**

(1) which of the following correctly identifies the methods of heat transfer? 1. A- convention B- radiaton C- conduction ~~~~~~~~~~~~~ 2. A- conduction B- radiaton C- convention ~~~~~~~~~~~~~ 3. A- convention B- conduction C- radiaton ~~~~~~~~~~~~~ 4. A- radiaton B- convention...

**general science**

When heat energy travelsby convection enrgy is transferred by the circulation of heated material is this tru? Yes. Convection heat transfer takes place as the result of circulation of a fluid between hot and cold regions.

**Chemistry**

When ice melts, it absorbs 0.33 kJ/g. How much ice is required to cool a 11.0oz drink from 76F to 39F, if the heat capacity of the drink is 4.18J/gC ? (Assume that the heat transfer is 100% efficient.) I got 11 g, but I guess that's wrong...

**physics**

A heat transfer of 8.7 multiplied by 105 J is required to convert a block of ice at -12°C to water at 12°C. What was the mass of the block of ice?

**PLEASE HELP ME IN THIS PHYSICS PROBLEM**

A heat transfer of 9.5 x 10^5 J is required to convert a block of ice at -15°C to water at 15°C. What is the mass of the block of ice?

**chem**

What would happen to the specific heat if some of the warm metal shot were lost during the transfer to the calorimeter? Answer a. It would not affect the calculated value of specific heat b. It would cause the calculated value of specific heat to be artificially high c. It ...

**Science**

Which of the following correctcly identifies the methods of heat transfer?

**HEAT TRANSFER**

Compute the heat flux thoroughly a 10 cm thick brick wall (k= 0.69 W/m-deg) Which has temperature of 105° C & 10° C maintained on its two faces. How this heat flux would vary when 3cm thick layers of magnesia insulation is added on the inside & outside faces of the wall? ...

**More Chem**

Consider the combustion of propane. Delta H is -2221 kJ. Assume all heat is from combustion of propane. What mass of propane must be burned in order to furnish this amount of energy assuming the heat transfer process is 60% efficient.