# PH3

62 results

### Chemistry

Put the following in order in terms of increasing melting point: SiH4, SiO2, CH4, NH3, PH3. Lowest → Highest (A) NH3, PH3, CH4, SiH4, SiO2 (B) SiO2, PH3, NH3, CH4, SiH4 (C) SiH4, CH4, NH3, PH3, SiO2 (D) CH4, SiH4, PH3, NH3, SiO2 (E) CH4, SiH4, SiO2, NH3, PH3

### chemistry

what is the maximum number of grams of PH3 that can be formed when 6.2 g of phosphorus reacts with 4.0 g of hydrogen to form PH3

### chemistry

calculate the mass of phosphorus required to make 200g of phosphine ,PH3 by the reaction: P4(S) +3NaOH(aq) +3H2O(I) ¨3NaH2PO4(aq) +PH3(g)

### chemistry

what is the maximum number of grams of PH3 that can be formed when 6.2grams of phosphorus reacts with 4.0 grams of hydrogen to form PH3? P4+6H2--> 4PH3

### chemistry

What is the maximum number of grams of PH3 that can be formed when 6.2 grams of phosphorus reacts with 4.0 grams of hydrogen to form PH3? P4+6H2-->4PH3. how do i do this question

### CHEMISTRY

Consider the reaction shown below. 4 PH3(g) P4(g) + 6 H2(g) If, in a certain experiment, over a specific time period, 0.0061 mol PH3 is consumed in a 1.9-L container each second of reaction, what are the rates of production of P4 and H2 in this experiment?

### chemistry

Many reaction involving heterogeneous catalysts are zeroth order, that is rate=k. An example is the decomposition of phosphine (PH3) over tungsten (w): 4Ph3---> P4 + 6H2 It is found That the reaction is independent of PH3. As lon 1 g as phosphine's pressure is sufficiently ...

### Science

Consider the following reaction, 4 PH3(g) + 8 O2(g) → P4O10(s) + 6 H2O(g) If a container were to have 32 molecules of PH3 and 32 molecules of O2 initially, how many total molecules (reactants plus products) would be present in the container after this reaction goes to ...

### Chemistry

8) ( 1 point) What is the maximum number of grams PH₃ that can be formed when 3.4 g of phosphorus reacts with 4 grams of hydrogen to form PH₃? P₄ (g) +6H₂ (g) → 4PH₃ (g) * 3.7 g 6.8 g 45 g 270 g 10. Lead nitrate can be decomposed by heating. What is the percent ...

### Science

8. The balanced equation P4 (s) + 6H2 (g) --> 4PH3 tells us that 2 mol H2 a. reacts with 1 mol 4 b. produces 4 mol PH3 c. cannot react with phosphorus d. produces 2 mol PH3 e. reacts with 2 mol P4 idk y i cant seem to get the answer from the choices above?

### chemistry

For each pair of substances listed below, identify the one with the lower boiling point. (a) Silane (SiH4) and Phosphine (PH3) answer = silane (b) Ammonia (NH3) and Phosphine (PH3) answer = phosphine (c) Lithium fluoride (LiF) and Hydrogen Fluoride (HF) answer = HF

### chemistry

PH3 has a mass of 17.33 grams, what is the mass in grams of H2 produced? 4 PH3 -> P4 + 6 H2

### AP CHEMISTRY

At 80.°C, Kc = 1.87 10-3 for the reaction. PH3BCl3(s) PH3(g) + BCl3(g) (a) Calculate the equilibrium concentrations of PH3 and BCl3 if a solid sample of PH3BCl3 is placed in a closed vessel at 80.°C and decomposes until equilibrium is reached. (b) If the flask has a volume ...

### AP CHEM

Kc = 1.87 10-3 for the following reaction. PH3BCl3(s)=>PH3(g) + BCl3(g) (a) Calculate the equilibrium concentrations of PH3 and BCl3 if a solid sample of PH3BCl3 is placed in a closed vessel and decomposes until equilibrium is reached. (b) If the flask has a volume of 0.400...

### chemistry

enthalpy change^H is +23kJ mol-1 of phosphine (PH3) for the reaction 2P(s)red+3H2(g)---->2PH3(g) a) Calc. entropy change for this reaction. Explain how this information allows you to determine the spontaneity or non-spontaneity of this reaction at any temp (S for PH3 is ...

### chemistry

Which of the following substances can act as a Bronsted acid in aqueous solution? (Select all that apply.) C3H8 NH41+ HCl H2 H2O H2CO3 PH3 Which of the following substances can act as a Bronsted base in aqueous solution? (Select all that apply.) PH3 PH41+ CO32- SO42- H2 CH4 NH3

### Science

Ammonia is used as a refrigerant not ph3 why...?

What is the balanced chemical equation for P+H2>PH3?

### science

Balance in acid solution PH3+ I2-> H3PO4+ I-

### chemistry

HOW MANY LITERS OF H2 must react to produce 75.0g of PH3

### chemistry

What is the shape and bond angle of PH3? Explain

### chemistry

Write the expression for Kc and Kp for the reaction PH3BCl3(s) <==> PH3(g) + BCl3(g)

### Chemistry

What mass of phosphine gas yields 3.5x10^-6 moles of PH3

### chemistry

The total number of atoms in 0.111 mol of FeCO3(PH3)2...?

### Chemistry

Draw the Lewis structure for each of these molecules. 1. PH3 2. H2S 3. HCl 4. CCl4 5. SiH4

### science

I need help with balancing redox reactions Balance in acid solution: 1) PH3+ I2 --> H3PO4+ I- 2) ClO3- + Cl- --> Cl2

### chem

would you expect the nonbonding electron pair domain in nh3 to be greater or less in size than for the corresponding one in PH3?

### chemistry

What would Qc be if the volume of the container decreased by a factor of 1.774 for the following reaction? PH3(g) + BCl3(g) → PH3BCl3(s) KC = 534.8 at 353.0oC

### Chemistry

If the standard enthalpy of formation of PH3(g) is +5.4 kJ mol-1, calculate the reaction enthalpy for 2PH3(g)--->2P(s)+3H2(g)

### chemistry

identify and show the bond in the formation of the following; AsH3 BaO BCL3 SO2 ZnC2 CL2 K2S PH3 PLS I NEED AN ANSWER THANKS

### Chemistry

Are these shapes correct?PH3-trigonal pyramidal, CHCl3-tetrahedral, H2S-linear and PO4^-3-tetrahedral?

### Chemistry

what are the coumpound names? Ex: H20: Dihyrdogen monoxide PH3 H3N H3PO2 CuSO4 P2O2 H2SO5 What is the formula? Ex: Nitric Acid: HNO3 Titanium (IV) Oxide:

### Biochemistry 105

8. Arrange the following molecules in the order of increasing polarity. a. (PH3, HCl, H2O, CCl4) b. (NH3, HF, H2O, HBr)

### Chem

How do you tell what type of solid (atomic, molecular, ionic, covalent network) will any substance form (i.e. PH3, H2, acetate)? I know that its mainly determined by what is at the lattice points but still have no clue how to go about it.

### Chem help

For which of the following molecules would the intermolecular forces be influenced mainly by dipole-dipole forces? PH3 CH3OHO HF C2H5OH CH3COCH3 how do I determine this

### MSJH

When heated, elemental phosphorus, P4, produces phosphine, PH3, and phosphoric acid, H3PO4. How many grams of phosphine are produced if 56 grams of P4 have reacted?

### chemistry

When heated, elemental phosphorus, P4, produces phosphine, PH3, and phosphoric acid, H3PO4. How many grams of phosphine are produced if 56 grams of P4 have react

### Chemistry

The boiling point of phosphine, PH3(-88C) is lower than that of ammonia, NH3(-33C) even though phosphine has twice th molar mass of NH3. Why?

### science

Balancing redox reactions Balance in acid solution 1. PH3+ I2 -> H3PO4 + I- 2. ClO3- + Cl- -> Cl2 Balance in basic solution Se -> Se2- + SeO3^2- BrO- + Cr(OH)4^- -> Br- + CrO4^2-

### chem 1211

P2 +3H2=2ph3 How many grams of ph3 can be formed when 37.5 grams of p2 and 83 L of h2 gas are reacted at 1 atm and 273.25 K? I really need a step by step of this problem. Thanks in advance!

### CHEMISTRY- intermolecular forces

What intermolecular forces act in the following: H2 PH3 CH3NH2

### Chemistry

consider the following molecules:SiH4, PH3, H2S. What is similar about these molecules? What is different about these molecules and why?

### Chemistry

For the following: i) HClO4 > HBrO4 > HIO4 ii) NH3 > PH3 > AsH3 > SbH3 iii) HOClO3 > HOClO2 > HOClO > HOCl iv) HBr>HCl>HF The order of acidity is correct for which series? 1. ) all are correct 2. ) ii and iii 3. ) ii and iv 4. ) ii 5. ) i, iii, iv

### Chemistry

Consider the following reaction in water: P4 (s) + 6 H2O (l) → 2 PH3 (g) + 2 H3PO3 (aq) If you allow 23.42 g of P4 to react what would be the pressure that the dry gas would exert on a 15.00 mL container at STP. Assume all of the phosphorus reacted. This can be solved by...

### science

(Points: 10) For the following: i) HClO4 > HBrO4 > HIO4 ii) NH3 > PH3 > AsH3 > SbH3 iii) HOClO3 > HOClO2 > HOClO > HOCl iv) HBr>HCl>HF The order of acidity is correct for which series? 1. ) all are correct 2. ) ii and iii 3. ) ii and iv 4. ) ii 5...

### science

(Points: 10) For the following: i) HClO4 > HBrO4 > HIO4 ii) NH3 > PH3 > AsH3 > SbH3 iii) HOClO3 > HOClO2 > HOClO > HOCl iv) HBr>HCl>HF The order of acidity is correct for which series? 1. ) all are correct 2. ) ii and iii 3. ) ii and iv 4. ) ii 5...

### science

Which of the following has a boiling point which does not fit the general trend. NH3 PH3 SbH3 AsH3 I am going with NH3 as i think its to do with "the larger the compound the greater the boiling point"(Vander waals forces) Am I correct?

### chemistry

For the following: i) H3PO4 > H3AsO4 > H3SbO4 ii) H2Te > H2Se > H2S > H2O iii) HCl > HBr > HI iv) SbH3 > AsH3 > PH3 > NH3 The order of acidity is correct for which series? 1. ) all are correct 2. ) i and ii 3. )i, ii and iv 4. ) ii, iii 5. ii, iv ...

### need help for chemistry

Account for the following observation: 1)Ammonia is exceptionally soluble in water. 2)Hydrogen fluoride ,HF, has a higher boiling temperature than methane, CH4. 3)The boiling temperature of ammonia (NH3)is -33˚C but that of phosphine (PH3) is -88˚C

Account for the following observation: 1)Ammonia is exceptionally soluble in water. 2)Hydrogen fluoride ,HF, has a higher boiling temperature than methane, CH4. 3)The boiling temperature of ammonia (NH3)is -33˚C but that of phosphine (PH3) is -88˚C

### Chemistry

Dr Bob Can you please confirm for me that only NH3 has a boiling point that does not fit the general trend from these choices NH3 PH3 SbH3 AsH3 many thanks andy I am picking NH3 because of the reason that the larger the compound the greater the boiling point Am I right with my...

### Chem

I just need to know if I did the problem correctly. The decomposition of phosphine, a very toxic gas, forms phosphorus and hydrogen in the following reaction: 4PH3(g) → P4(g) + 6H2(g) If the instantaneous rate of the reaction with respect to PH3 is -0.41 M s-1, what is ...

### chemistry

a) Define the following terms: • Electronegativity • Bond polarity • Ionization energy b) What is the difference between ionic bonds, covalent bonds and polar covalent bonds? Give two examples of each c) Draw Lewis structures for each of the following: • BF3 • BF4...

### chemistry

Balance each of the following equations a)CH4+CL2......>CCl4+HCl b)AL(OH)3+H2SO4.....>Al2(SO4)3+H2O c)Fe+H2O......>fe3O4+H2 d)Al4C3+HCl......>AlCl3+CH4 e)C2H6+O2......>CO2+H2O f)P2H4.......>PH3+P4 g)S2Cl2+NH3......>N4S4+NH4CL+S8 h)Ag+HNO3.......>AgNO3+...

### Chemistry

Which one of the following compounds does not follow the octet rule? a) NF3 b) CF4 c) SF4 d) PH3 e) HCl I know I can eliminate A and B because nitrogen and carbon follow the octet rule. I know I can eliminate E because the total amount of valence electrons in HCl is 8. I am ...

### CHEM

4. The decomposition of phosphine, a very toxic gas, forms phosphorus and hydrogen in the following reaction: 4PH3 (g) P4 (g) + 6H2 (g) (a) Express the rate of reaction with respect to each of the reactants and prducts (b) If the instanteneous rate of the reaction with respect...

### Chemistry

Why does I2 have a higher boiling point than F2? And why does NH3 have a higher boiling point than PH3?

### Chemistry

The PH3 molecule is 1. linear 5. tetrahedral 2. bent 6. trigonal bipyramidal 3. planar triangular 7. octahedral 4. trigonal pyramidal 8. None of these Do you think the professor is asking for molecular shape or electron geometry. I know the electron geometry is tetra and the ...

### Physiology

Indicate whether the following circumstances would tend to increase, decrease or have no effect on the rate of enzyme activity. 1.adding more substrate but keeping the amount of enzyme of the same 2.adding more enzyme but keeping the amount of substrate the same 3. adding a ...

### Chemistry

Chart: Group, Bond length, Bond strength, H-X-H Bond Angle NH3: 1.000, 391, 107 PH3: 1.412, 322, 93.5 AsH3: 1.510, 247, 92 SbH3: 1.688, 247, 92 What physical states do these molecules exist at room temperature? Gas Briefly explain the observed trend in bond length. Briefly ...

### science(chem)

Hi =) I have two Q's 1. What are the 2 purposes of using a caffine standard during the HPLC process? In general not talking about HPLC I would think a standard is for a)comparing to your own results to see how good your results came out. b) seeing if you have any contamination...

### Chemistry

I am super confused when it comes to these types of questions! Can someone check my work? None of my answers matched those of my teacher when she read them this morning for last night's homework. Please help! 1. Consider the following equilibrium reaction: 2PH3(g) <-> 2P...

1. 1