# In this problem you will estimate the heat lost by a typical house, assuming that the temperature inside is T(in) = 20 degrees celcius and the temperature outside is T(out) = 0 degrees celcius. The walls have fiberglass insulation, which

90,154 results

### College Physics

In this problem you will estimate the heat lost by a typical house, assuming that the temperature inside is T(in) = 20 degrees celcius and the temperature outside is T(out) = 0 degrees celcius. The walls have fiberglass insulation, which dominates the heat conduction ...

### College physics

In this problem you will estimate the heat lost by a typical house, assuming that the temperature inside is T(in) = 20 degrees celcius and the temperature outside is T(out) = 0 degrees celcius. The walls have fiberglass insulation, which dominates the heat conduction ...

### physics

In a house the temperature at the surface of a window is 20.1 °C. The temperature outside at the window surface is 2.72 °C. Heat is lost through the window via conduction, and the heat lost per second has a certain value. The temperature outside begins to fall, while the ...

### Physics

In a house the temperature at the surface of a window is 22.3 °C. The temperature outside at the window surface is 2.82 °C. Heat is lost through the window via conduction, and the heat lost per second has a certain value. The temperature outside begins to fall, while the ...

### physic

In a house the temperature at the surface of a window is 25 ¡ãC. The temperature outside at the window surface is 5.0 ¡ãC. Heat is lost through the window via conduction, and the heat lost per second has a certain value. The temperature outside begins to fall, while the ...

### Physics

find the heat flow through the sides of an 25cm tall by 10cm wide of ice water in 46s.The glass is 6.00mm thick; the temperature is inside is 28 celcius, the temperature outside is 50 celcius

### physics

A house with a room wall of 5m by 3m is build of bricks of 20 cm. if internal temperature is 21 degrees celcius and those outside -18 degres celcius; what is the amount of heat flow if thermal conductivity is 0.63

### physics

what should be the resistance of a heating coil which will be used to raise the temperature of 500 grams of water from 28 degrees celcius to 100 degrees celcius in 2 minutes, assuming that 25% of the heat is lost? the heater utilizes 110 volts.

### Physics

If the air temperature is the same as the temperature of your skin (about 30 degrees Celcius), your body cannot get rid of heat by transferring it to the air. In that case, it gets rid of the heat by evaporating water (sweat). During bicycling, a typical 71.0 kg person’s ...

### physics

Hot water of mass 80g, at a temperature of 100degree celcius is pourd into 30g of water at 30degree celcius. Assuming that no heat is lost, calculate the final temperature

### science

A heat exchanger is used to warm apple cider using steam as the heat source. The cider is heated from an initial temperature of 4 degrees celcius to a final temperature of 65 degree celcius. The steam enters the heat exchanger as 50% quality steam and exits as water condensate...

### Food Chemestry

A heat exchanger is used to warm apple cider using steam as the heat source. The cider is heated from an initial temperature of 4 degrees celcius to a final temperature of 65 degree celcius. The steam enters the heat exchanger as 50% quality steam and exits as water condensate...

### chemistry

60.0 g of iron that has an initial temperature of 250 degrees C and 60.0 g of gold that has an initial temperature of 45.0 degrees C are brought into contact with one another. Assuming no heat is lost to the surroundings, what will be the temperature when two metals reach ...

### Physics

Consider 3 layers of a wall. The first layer is plaster 1.0 cm thick(R=0.033 SI units), the second layer is fiberglass insulation 8.9 cm thick (r=2.97), and the outside layer is woodd 3.0 cm thick(0.33). What is the heat loss through one square meter of wall if the inside ...

### physics

In lab you submerge 100 g of 41 degree Celcius iron nails in 100 g of 25 degree Celcius water (the specific heat of iron is 0.12 cal/g degrees Celcius) A)Equate the heat gained by the water to the heat lost by the nails and find the final temperature of the water. B)Your lab ...

### Chemistry

If 150.0 grams of iron at 95.0 degrees Celcius, is placed in an insulated container containing 500.0 grams of water at 25.0 degrees Celcius, and both are allowed to come to the same temperature, what will that temperature be? The specific heat of water is 4.18 J/g degrees ...

### College Physics

The top layer of your goose down sleeping bag has a thickness of 5.0 cm and a surface area of 1.0 m^2. When the outside temperature is -18 degrees celcius you lose 24 Cal/hr by heat conduction through the bag (which remains at a cozy 34 degrees celcius inside). Assume that you...

### College Physics

The top layer of your goose down sleeping bag has a thickness of 5.0 cm and a surface area of 1.0 m^2. When the outside temperature is -18 degrees celcius you lose 24 Cal/hr by heat conduction through the bag (which remains at a cozy 34 degrees celcius inside). Assume that you...

### Math

An object is heated to 90 degrees Celcius and is then allowed to cool in a room whose air temperature is 25 degrees celcius. If the temperature of the object is 75 degrees celcius after 10 minutes, when will its temperature be 50 degrees celcius? I have no idea how to do this...

### Math

An object is heated to 90 degrees Celcius and is then allowed to cool in a room whose air temperature is 25 degrees celcius. If the temperature of the object is 75 degrees celcius after 10 minutes, when will its temperature be 50 degrees celcius? I have no idea how to do this...

### chem

NaOH + HCl ------> NaCl + HOH I need to figure out the quantity of heat in this reaction. The volume of the solution is 150 mL (NaCl + HOH). The inital temperature is 26 degrees celcius and the final temperature is 23 degrees celcius. That's all I know. How would I go about...

### chemistry HELP

A 46.2 gram sample of copper is heated to 95.4 degrees celcius and then place into a calorimeter containing 75.0 grams of water at 19.6 degrees celcius. The final temp of the water and copper is 21.8 degrees celcius. Calculate the specific heat capacity of copper, assuming all...

### Final Temperature

A sample of steam with a mass of 0.553 g and at a temperature of 100 degrees C condenses into an insulated container holding 4.25 g of water at 4.0 degrees C. Assuming that no heat is lost to the surroundings, what will be the final temperature of the mixture?

### Physics

A physicist converted 2 kg of water at 37 degrees celcius to steam at 100 degrees celcius. Assuming no heat is lost, calculate the amount of energy needed to heat to 100 degrees celcius.

### chemistry

What is the heat evolved of oxalic acid if the temperature change initial is 28 degrees celcius and the final is 29 degrees celcius and the change in temperature is 1 degree celcius,what is the heat capacity of axolic acid

### math

The temperature in your house is controlled by a thermostat. The temperatures will vary according to the sinusoidal function:f(x)=6sin(pi/12(x-11)+19, where f(x) represents the temperature in degrees Celsius (°C) and x is hours since midnight. What is the temperature of your ...

### Math

An object is heated to 90 degrees Celcius and is then allowed to cool in a room whose air temperature is 25 degrees celcius. If the temperature of the object is 75 degrees celcius after 10 minutes, when will its temperature be 50 degrees celcius?

### Precalculus ????

The temperature in your house is controlled by a thermostat. The temperatures will vary according to the sinusoidal function: f(x)=5sin(pi/12)*(x-11)+19 where f(x) represents the temperature in degrees Celsius (°C) and x is hours since midnight. What is the maximum ...

### Physics

A 100g piece of ice at 0 degrees celcius is placed into a container holding 200g of water, initially at temperature 25 degrees celcius. Heat flows from the water to the ice, cooling the water and melting the ice. Calculate a) how many moles of ice and how many moles of water ...

### Chemistry

How many joules of heat are needed to heat 25.0 g of ice at -5.0 degrees celcius to a final temperature of 40.0 degrees celcius? The specific heat of ice is 2.1 j. Our teacher mention to consider the state of water present at 40.0 degrees celcius which is confusing me. Any ...

### Physics 11th grade 'Heat'

1) Nova, whose mass is 50.0 kg, stays out skiing for too long and her body temperature drops by 2.00 degree celsius . What is the amount of heat lost from Nova's body? (cHuman body= 3470 J/kg degre celcius) 2) Phoebe's insulated foam cup is filled with 0.150 kg of the coffee (...

### physics

What would be the final temperature when 125g of 25 degrees Celcius water is mixed with 85g of 45 Degrees Celcius water? ( hint: Equate the heat gained by the cool water with the heat lost by the warm water.)

### Science

1. How much heat energy is lost by 3 kg of water when it cools from 80 degrees C to 10 degrees C? 2. A 300 g piece of aluminum is heated from 30 degrees C to 150 degrees C. What amount of heat energy is absorbed? 3. Determine the temperature change in each of the following. (a...

### Physics

A glass windowpane in a home is 0.62 cm thick and has dimensions 1.0 m x 2.0 m. On a certain day, the indoor temperature is 25 C and the outdoor temperature is 0 C. a) What is the rate at which energy is transferred by heat through the glass? b) How much energy is lost through...

### Chemistry

A sample of steam with a mass of .550 g and at a temperature of 1 degrees C condenses into an insulated container holding 4.40 g of water at 5.0 degrees C. Assuming that no heat is lost to the surroundings, what will be the final temperature of the mixture?

### physical science

Compare the amount of heat required to change the temperature of 150 kg of copper from 12 degrees celcius to 56 degrees celcius to the amount of heat required to change the temperature of 150 kg of gold from 12 degrees celcius to 56 degees celcius.

### Chemistry

A sample of steam with a mass of 0.550 g and at a temperature of 100 degrees C condenses into an insulated container holding 4.40 g of water at 5.0 degrees C. Assuming that no heat is lost to the surroundings, what will be the final temperature of the mixture?

### AP Calculus AB

the temperature of a 10m long metal bar is 15 degrees celcius at one end and 30 degrees celcius on the other end. Assuming that the temperature increases linearly from the cooler end to the hotter end, what is the average temperature of the bar? Also, explain why at least one ...

### PHYSICS

Bricks have a thickness of 12 cm, if an external wall of the house measures 10 mx 15m, calculate the rate of heat exchange through this wall if the inside temperature is 200C and the outside temperature is 50C.

### chem

What is the final temperature (degrees celcius) of 1.36g of water with an initial temperature of 23.0degrees celcius after 6.420J of heat is added to it?

### Math

This expression 1.8C + 32, show how to convert from degrees Celcius to degrees Fahrenheit, where C represents the temperature in degrees Celcius. What is the temperature in degrees Farrenheit when the temperature is 25 degrees Celsius?

### Chemistry

1) Determine the amount of heat in kJ given off when 1.26 x 10^4 g of NO2 are produced according to the equation: 2NO (g) + O2 (g) --> 2NO2 (g) and delta (H) = 483.6 kJ/mol 2) A sheet of gold weighing 10 g and at a temperature of 18 degrees C is placed on a flat sheet of ...

### physics

A glass windowpane in a home is 0.62 cm thick and has dimensions of 1.30 m × 1.72 m. On a certain day, the indoor temperature is 26°C and the outdoor temperature is 0°C. (Assume the thermal conductivity of the glass is 0.8 J/s · m · °C.) (a) What is the rate at which ...

### physics

A glass windowpane in a home is 0.62 cm thick and has dimensions of 1.30 m × 2.22 m. On a certain day, the indoor temperature is 22°C and the outdoor temperature is 0°C. (Assume the thermal conductivity of the glass is 0.8 J/s · m · °C.) What is the rate at which energy ...

### science

A copper calorimeter of mass 150g, was half filled with water of mass 300g and temperature 0 degrees celcius. 5g of ice at 0 degrees celcius was added to the content, later some quanity of steam was passed into the mixture and the temperature rose by 20 degrees celcius. ...

### Biology

How much heat is needed to raise the temperature of 20g of copper from 20 degrees celcius to 40 degrees celcius? (The specific heat of copper is 385J/Kg degrees celcius)

### Chemistry-Dr.Bob

An unknown piece of metal weighing 100. g is heated to 90.0 degrees Celcius. It is dropped into 250 g of water at 20.0 degrees Celcius. When equilibrium is reached, the temperature of both the water and piece of metal is 29.0 degrees Celcius. Determine the specific heat of the...

### chemistry

calculate the heat energy required to raise the temperature of a 500. gram iron pipe from 25 degress celcius to 100 degrees celcius. the specific heat for iron is .45 J/g degrees celcius

### Chemistry

How do you solve this equation? A piece of aluminum with a mass of 3.90g and a temperature of 99.3 degrees celcius is dropped into 10.0 g of a water at a temperature of 22.6 degrees celcius. What is the final temperature of the system?

### math

At a house on a particular day the outside temperature differs from the inside temperature by 65 degrees fahrenheit. The house has a 39 inch by 7 foot front door.[ with storm door] What would be the heat loss through the front door of the house on this day in btu? This cannot ...

### science

a 100.0 gram metal sample is heated to a temperature of 110 degrees celcius then placed into a calorimeter containing 100.0 r of pure water (at initial temperature of 23 degrees celcius). after the sample and water reach thermal equalibrium, their final temperature is 29 ...

### physics

A COPPER BLOCK ,MASS 500g AND AT 200 DEGREES CELCIUS GIVES OUT ENERGY AT AN AVERAGE RATE OF 50W. (i)what is temperature after 5 min ? (ii)how long will it take before its temperature drops to 50 degrees celcius

### physics

A 2.8 kg gold bar at 99 degrees celcius is dropped into 0.21 kg of water at 23 degrees celcius What is the ﬁnal temperature? Assume the speciﬁc heat of gold is 129 J/kg times degrees celcius. Answer in units of degrees celcius

### Science

A lead calorimeter with mass of 150g contains 200g of water. The calorimeter and water are in thermal equilibrium at a specific temperature. Two metallic blocks are placed into the water. One is a 50.0g piece of aluminum heated at 90 degrees celcius. The other has a mass of ...

### Science

A lead calorimeter with mass of 150g contains 200g of water. The calorimeter and water are in thermal equilibrium at a specific temperature. Two metallic blocks are placed into the water. One is a 50.0g piece of aluminum heated at 90 degrees celcius. The other has a mass of ...

### Help me!, Physics

A 60g piece of ice at an intial temperature that is unknown is placed into a glass of 250g of water sitting at room temperature when it is 80 degrees F in the room. The glass and ice come up thermal equilibrium at 4 degrees Celsius. What is the original temperature of the ...

### Chemistry

Suppose a piece of lead with a mass of 14.9g at a temperature of 92.5 degrees C is dropped into an insulated container of water. The mass of water is 165g and its temperature before adding the lead is 20.0 degrees C. What is the final temperature of the system. Following an ...

### Chemistry

If 15.0 mL of a 1.5M HCl solution at 22.5 degrees C is mixed with 25.0mL of a 1.5M NaOH solution at 21.5 degrees C that is in a calorimeter, and the final mixed solution temperature ends up at 28.5 degrees C, 1.)what is the balanced equation for this reaction? 2.) what is the ...

### math

At 9:00 pm the outside temperature was 20 celcius, by midnight the temperature had dropped x degrees. Which of the following represents the midnight temperature? 20 + x 20-x 20 20x

### Chemistry 1 HN

Find the mass of iron heated to 85 degrees celcius that was added to 54.0 grams of water. The temperature of the water changed from 20 degrees celcius to 60 degrees celcius. The specific heat of the iron is 0.045 J/g degrees celcius

### Multon Middle

A 5. pellet of aluminum at 20 degrees celcius gains 200 joules of heat. What is its final temperature? [specific heat of Aluminium, c=920 j/Kg. degrees celcius)

### precalculus

Outside temperature over a day can be modelled as a sinusoidal function. Suppose you know the temperature is 80 degrees at midnight and the high and low temperature during the day are 90 and 70 degrees, respectively. Assuming t is the number of hours since midnight, find an ...

### Physics

a BATH CONTAINS 100 KG OF WATER AT 60 DEGREES CELCIUS. HOT AND COLD TAPS ARE THEN TURNED ON TO DELIVER 20KG PER MINUTE EACH A TEMPERATURE 70 DEGREES CELSIUS AND 10 DEGREES CELSIUS RESPECTIVELY. HOW LONG WILL IT BE BEFORE THE TEMPERATURE IN THE BATH HAS DROPPED TO 45 DEGREES ...

### PHYSICS

A BATH CONTAINS 100 KG OF WATER AT 60 DEGREES CELCIUS. HOT AND COLD TAPS ARE THEN TURNED ON TO DELIVER 20KG PER MINUTE EACH A TEMPERATURE 70 DEGREES CELSIUS AND 10 DEGREES CELSIUS RESPECTIVELY. HOW LONG WILL IT BE BEFORE THE TEMPERATURE IN THE BATH HAS DROPPED TO 45 DEGREES ...

### Chemistry

Calculate the specific heat of a metallic element if 314 jouldes of heat energy are needed to raise the temperature of a 50g sample from 25 degrees Celcius to 50 degrees Celcius?

### physics

120 grams of an unknown metal at a temperature of 95 degrees celcuius is poured into 140 grams of aluminum calorimeter containing 220 grams of water. If the inital temperature of the water and calorimeter was 15 degree celcuius and the final temperature was 18 celcius, find ...

### College Chemistry

A 542-g piece of copper tubing is heated to 89.5 degrees Celcius and placed in an insulated vessel containing 159 g of water at 22.8 degrees Celcius. Assuming no loss of water and a heat capacity for the vessel of 10.0 J/K, what is the final temperature of the system (c=0.387 ...

### Heat and Molar Mass

An aqueous solution containing 34.6 g of an unknown molecular nonelectrolyte compound in 142.0 g of water was found to have a freezing point of 1.2 degrees C. Calculate the molar mass. A sample of steam with a mass of 0.553 g and at a temperature of 100 degrees C condenses ...

### math

Katie converts the outside temperature from degrees fahrenheit, f, to degrees celsius, c. She uses the formula below to convert the temperature. (F-32)5/9=c if the outside temperature is 50 degrees fahrenheit, what is the outside temperature in degrees celsius

### math

the temperature is -10 degrees outside. The temperature inside is 72 degrees. what is the difference between the two temperatures?

### physics

Assuming that the human body has a 1.2-cm-thick layer of skin tissue and a surface area of 1.5m2 , estimate the rate at which heat is conducted from inside the body to the surface if the skin temperature is 34 ∘C. (Assume a normal body temperature of 37 ∘C for the ...

### chemistry

When 45 grams of an alloy is dropped into 100.0 grams of water at 25 degrees celcius, the final temperature is 37 degrees celcius. what is the specific heat of the alloy? the alloys Temperature is 100 degrees celsius

### Science

90 calories of heat is added to 1 gram of fresh water with an initial temperature of 10 degrees Celcius. What is the final temperature of this liquid? (latent heat of fusion = 80cal/g°C, latent heat of vaporization = 540 cal/g°C)

### Physics

You hold an inflated balloon over a hot air vent in your house and watch it slowly expand. You then remove it and let it cool back to room temperature. During the expansion, which was larger: the heat added to the balloon or the work done by the air inside? explain. (assume ...

### Physics conceptual

You hold an inflated balloon over a hot air vent in your house and watch it slowly expand. You then remove it and let it cool back to room temperature. During the expansion, which was larger: the heat added to the balloon or the work done by the air inside? explain. (assume ...

### physics

How much energy is needed to increase the temperature of 500g of lead from 20 degrees celcius to 45. The specific heat heat capacityof lead is 128J/kg/degrees celcius

### science

what is the heat capacity of iron when a 15.75-g piece of iron absorbs 1086.75 joules of heat energy, and it's temperature changes from 25 degrees celcius to 175 degrees celcius

### Heat & Properties of Matter

A platinum resistance thermometer has a resistance of 10.59ohms at 0 degree celcius and 15.59ohms at 100 degree celcius. Assuming that the resistance changes uniformly with temperature, what is: (i) the temperature when the resistance is 10.59ohms? (ii) the resistance of the ...

### Heat & Properties of Matter

A platinum resistance thermometer has a resistance of 10.59ohms at 0 degree celcius and 15.59ohms at 100 degree celcius. Assuming that the resistance changes uniformly with temperature, what is: (i) the temperature when the resistance is 10.59ohms? (ii) the resistance of the ...

### math

1. Estimating the Temperature of a Yam Suppose you put a yam in a hot oven, maintained at a constant temperature of 200C. As the yam picks up heat from the oven, its temperature rises.16 (a) Draw a possible graph of the temperature T of the yam against time t (minutes) since ...

### calculus

1. Estimating the Temperature of a Yam Suppose you put a yam in a hot oven, maintained at a constant temperature of 200C. As the yam picks up heat from the oven, its temperature rises.16 (a) Draw a possible graph of the temperature T of the yam against time t (minutes) since ...

### Chemistry

The temperature of a 12.58g sample of calcium carbonate increases from 23.6degrees celcius to 38.2 degrees celcius. If the heat capacity is 0.82J/g-K, how many Joules of heat are absorbed

### Chemistry

How much heat energy is required to raise the temperature of 4.50 liters of water from 36 degrees celcius to 44.6 degrees celcius?

### Chemistry

How much heat is required to raise the temperature of a 125g block of iron from 17.5 degrees celcius to 82.3 degrees celcius?

### Chemistry

A 30 ounce iron bar at 425 degrees Fahrenheit is placed in 2.00 quarts of water at 80.0 degrees Fahrenheit. What will be the change in temperature of the iron bar in degrees Fahrenheit? (Assume 1/3 heat lost to the surroundings) Specific heat of iron= .473 Joules/grams degrees...

### science

Fifty grams of ice at 0 degrees celcius is added to 200grams of water at 40 degrees celcius contained in a 100 grams copper calorimeter. If the final temperature of the mixture is 16 degrees celcius, find the heat of fusion of ice.

### science

When 90 kJ is removed from a 2-kg copper bar its temperature drops from 200 degrees celcius to 85 degrees celcius what is the specific heat of the iron?

### chemistry

how much heat would it take to raise the temperature of 52.0 grams of water from 22.0 degrees celcius to 100.0 degrees celcius

### Chemistry

How much heat is required to raise the temperature of a 35.0g block of aluminium from 125 degrees celcius to 322 degrees celcius?

### CHEMISTRY

Suppose a sample of hot iron is dropped in a cup of room temperature water. a) what happens to the temperature of the iron & water? b.) in what direction does heat flow occur? c.) when does heat flow stop? d.) assuming no heat is lost to the environment, compare heat gained ...

### chemistry

29.8 ml of ethanol (density = 0.789 g/ ml) initially at 9.9 degree celsius is mixed with 33.8 mL of water (density = 1.0 g/mL) initially at 27.8 degree celcius in an insulated beaker. Assuming that no heat is lost, what is the final temperature of mixture? How do I start this ...

### ap chemistry

A sample of KOH is dissolved into 100.0 grams of water in a coffee cup calorimeter. if the dissolution produces 6.45 kJ of heat and the temperature change is 25.4 degrees celcius to 40.0 degrees celcius, how much KOH (in grams) is added to the water? (the specific heat of the ...

### Physics- LOST!

If the air temperature is the same as the temperature of your skin (about 30.0 C), your body cannot get rid of heat by transferring it to the air. In that case, it gets rid of the heat by evaporating water (sweat). During bicycling, a typical 70.0 kg person's body produces ...

### physics

a)Estimate how long it takes for the cold air to fall out when you open the door of your refrigerator. For simplicity, assume your fridge is a cube of height 1 meter, and that the cold air inside is 5% denser than the warm air outside. Imagine that you remove the top and ...

### physics

How much heat is lost in one hour through a 0.15 m × 3.7 m × 6.1 m concrete floor if the inside temperature is 22.0 °C and the ground temperature is 13.0 °C?

### chemistry

calculate the heat energy required to raise the temperature of a 500 gram iron pipe from 25 degrees celcius to 100 degrees celcius

### chemistry

The heat lost or gained by a system is related to its temperature change by a property called its heat capacity. The molar heat capacity of metals at or above room temperature equals 24.92 J/K.mol. The temperature of a block of lead (MM 207.2) was raised by 13.1 degrees when ...

### math/physics

Estimate the percentage savings in the fuel bill if the thermostat is set back from 68 degrees F to 50 degrees F for 12 hours of the day, and left at 68 degrees F for the other 12 hours, assuming an outside temperature of 15 degrees F all day.

### Heat Transfer

The inside wall of a furnace needs to be designed such that it transmits a maximum heat flux of 600 W/m2 . The inside wall temperature will be 1100°C and the outside temperature will be 150°C. We have two different types of bricks from which we can make the wall: Type 1: 24 ...