# I'm doing the calculations on the lab "Oxidizing Power of Laundry Bleach," and I'm stuck on one part. This is what I have so far: My average volume of sodium thiosulfate is 6.94 ML. I then converted that into moles

169,803 results

1. ### Ap Chemistry

I'm doing the calculations on the lab "Oxidizing Power of Laundry Bleach," and I'm stuck on one part. This is what I have so far: My average volume of sodium thiosulfate is 6.94 ML. I then converted that into moles and got 6.94X10^-4 moles. That means that NaClO is equal to ...

Titration of a Sample of Household bleaches: The oxidizing agent in a household bleach is determined by placing 100 mL of distilled water in a 250 mL Erlenmeyer flask and adding 10 mL of the 10% (w/w) KI solution, swirling the contents of the flask to mix the solutions. Add an...
3. ### Chemistry

Hi DrBob, Sorry about that, I wasn't very clear! Can someone please help me complete these calculations for my lab; I am having some trouble. A. Standardization of Na2S2O3 -Mass of KIO3 in 100mL = 0.09600g -Calculate Molarity of KIO3= ? Please check: 0.09600g/(214.0g/mol)=4....
4. ### Chemistry 2

The bottle of bleach lists the percentage of sodium hypochlorite as 6.0%. If the density of commercial bleach is 1.084 g/mL, how many mL of .150 M sodium thiosulfate is required to reach the endpoint in a titration if a student analyzed a 2.0 mL sample of bleach.
5. ### Chemistry

I'm in 10th grade and we did a titration lab; with every lab we have to answer follow up questions and I'm totally stuck on this one: We did not uses the volume of the water added initially to the Erlenmeyer flask in our calculations. Why? Ok as far as calculations go, I'm not...
6. ### Chemistry: please double check...

Please double check one last time have to hand it in tomorrow.Thank-You in Advance. This was the lab experiment: ------------------------------------------- A. Standardization of the Sodium Thiosulfate Solution Make up a standard solution of potassium iodate by accurately “...
7. ### Chemistry

Regular-strength chlorine bleach is a 5.25% solution of NaClO. how many milliliters of 0.02005 M sodium thiosulfate will be required to reach the equivalence point in the titration of a 1.000ml sample of Bleach by reacting the ClO- ions with I, then titrating the resulting I2 ...
8. ### Chemistry

Hello, So I have recently done a lab with cobalt(II) nitrate and NaOCl (bleach) and our objective was to determine if colbalt or the bleach is part of the rate determining step. With the lab we have done trials by diluting the colbalt and leaving the concentration of bleach ...
9. ### chemistry

If 90 mL of laundry bleach containing a 5.0% w/v concentration of sodium hypochlorite is recommended per load of laundry, what mass of sodium hypochlorite is being used per load?
10. ### Chemistry

Can someone please help me complete these calculations for my lab; I am having some trouble. A. Standardization of Na2S2O3 -Mass of KIO3 in 100mL = 0.09600g -Calculate Molarity of KIO3= ? Please check: 0.09600g/(214.0g/mol)=4.486x 10^-4 mol -4.486 mol/0.1L= 44.86 M B. ...
11. ### chemistry........help!! =)

One brand of laundry bleach is an aqueous solution containing 4.00% sodium hypochlorite (NaOCl) by mass What is the molarity of this solution? (Assume a density of 1.02 g/mL .)
12. ### Chemistry

To illustrate the calculation, assume that 21.95 mL of a thiosulfate solution is required to reduce the iodine liberated by 20.85 mL of 0.0200M KIO3 and that 18.63 mL of the same thiosulfate solution reacts with the iodine replaced by 20.00 mL of an unknown solution of sodium ...
13. ### Language Arts

What fact does the author use to support her opinion about bleach? (1 point) 1. Bleach is a poison. 2. Bleach is an expensive part of processing water. 3. Bleach isn’t terrific to have around. __________________________________________ Note: This is not a question about what...
14. ### Chemistry

A solution of household bleach contains 5.25% sodium hypochlorite, NaOCl, by mass. Assuming that the density of bleach is the same as water, calculate the volume of household bleach that should be diluted with water to make 500.0 mL of a pH = 10.23 solution.
15. ### chemistry

A solution of household bleach contains 5.25% sodium hypochlorite, NaOCl, by mass. Assuming that the density of bleach is the same as water, calculate the volume of household bleach that should be diluted with water to make 500.0 mL of a pH = 10.23 solution.
16. ### Chemistry

A solution of household bleach contains 5.25% sodium hypochlorite, NaOCl, by mass. Assuming that the density of bleach is the same as water, calculate the volume of household bleach that should be diluted with water to make 500.0 mL of a pH = 10.10 solution.
17. ### Organic Chemistry

In lab, we did an oxidation of 2-ethyl-1, 3-hexanediol with acetic acid and sodium hydrochlorite. I understand the acid is the solvent and in combination with NaOCl produces hypochlorous acid the oxidizing agent. Then we mix with an ice salt mixture and then extract with ether...
18. ### CHEMISTRY.

Knowing that bleach contatins 5% aqueous sodium hypocholirte, how much sodium hypochlorite does 700ml of 10% bleach contain? (in grams)
19. ### o-chem

So in lab, I was to oxidize 9-fluorenol to 9 fluorenone. The chemicals I used were: 100 mg. of 9-fluorenol in 6mL of acetone. 0.25 mL of glacial acetic acid and 1.2 mL of a 5.25% sodium hypochlorite solution. My question is if I attempt to oxidize 9-fluorenol by adding only ...
20. ### Chemistry

I am trying to figure out how to calculate the reaction rate. In my question the reaction rate is: 1/2x molarity of sodium thiosulfate/reaction time Then I have to compare the rates of runs 1-3 and determine the orders of the reaction. Do I only find the reaction rate based ...
21. ### Lab/Chemistry

In lab, I weighed out and found the molarity of 1.108g Na2C2O4 and 1.100g K3Fe(C2O4)3. I titrated an average of 0.0335L of the sodium oxalate solution with KMnO4(potassium permanganate). I then titrated an average of 0.0169L of K3Fe(C2O4)3 X 3H2O with potassium permanganate. I...
22. ### Chemistry

List the grams of bleach solution necessary to provide 0.931g of NaClO(laundry bleach is 8.25% NaClO by weight) and the mL of bleach solution that contains the necessary amount... NaClO=74.442 g/mol. Need 0.931 grams of NaClO. Density of NaClO solution is 1.07 g/ml
23. ### chemistry

Somewhat confused... my homework is asking me to calculate morality of sodium thiosulfate from a 55 ml solution. the sodium's volume is 50 ml and has a concentration of 0.25M. The rest of the 55ml comes from the 5ml of HCL.
24. ### chemistry

The balanced equation doesnt seem to help because the thiosulfate is not in the equation, I think it is preventing the reaction from going backwards. THe equation is: 2iodide ion + hydrogen peroxide + 2 H3O --> elemental iodide + 4 H2O within the reaction there is also ...
25. ### chemistry

I did a lab on pressure and depth today. This lab was to simply submerge a plastic tube into a large graduated cynlinder to find the relationship between the two. I found that as the depth increases, so does the pressure. One of the questions I'm stuck on for part of my lab ...
26. ### Chemistry

A solution household bleach contains 5.25% NaClO, by mass. Assuming that the density of bleach is the same as water(1.0g/ml). Calculate the volume in mL of household bleach that should be diluted with water to make 500.0 ml of a pH= 9.80 solution. Here's what I've done so far...
27. ### Chemistry

Please help me with this chemistry question? I am working on a lab report and I am stuck on this question: Use the concept of stoichiometry to explain why balanaced equations are necessary when performing calculations in chemistry. Propose a situation where precise amounts of ...

In lab, I weighed out and found the molarity of 1.108g Na2C2O4 and 1.100g K3Fe(C2O4)3. I titrated an average of 0.0335L of the sodium oxalate solution with KMnO4(potassium permanganate). I then titrated an average of 0.0169L of K3Fe(C2O4)3 X 3H2O with potassium permanganate. I...
29. ### chemistry

Question about titration calculations in analysis of antacids lab. We did a lab yesterday with antacids, HCl and NaOH and I'm having trouble doing the calculations. The information known is the following: 1)0.10M NaOH 2)0.10M HCl 3)Mass of Antacid .22g 4)Volume of NaOH ...
30. ### chem

12.16 mL of 0.205 M thiosulfate are required to reach the endpoint in the titration of 2.26 g of bleach sample
31. ### Chemistry

Calculate the mass in grams of the undiluted bleach that was in the sample of bleach titrated. Given: Density of undiluted bleach unkown is 1.042 g/mL. 14.44 mL of .100 M Na2S2O3. .0537 grams of NaClO. Each sample should conain 1/5 of the original undiluted bleach. Since 5mL ...
32. ### Chemistry Lab

So I did a kinetics lab on the rate of reaction of peroxydisulfate ion with iodide ion. Part 1 was the effect of concentration. One of the questions asked is to calculate the amount of thiosulfate consumed in moles. My results for trial 1 were (Times taken for consumption of 1...
33. ### Chemistry

I just did a lab on Acids and Bases and I am having trouble with the lab questions I was given to complete. Concentration of NaOH: 0.09999 M Volume of NaOH: 3.25 mL # moles of NaOH: 0.325 moles Initial Concentration of Weak Acid: ? (How do we calculate this) Part 2: Hydrolysis...
34. ### Chemistry

Sorry to post again but I'm really stuck on this one! I'm doing some post lab questions and I'm stuck on one. In lab we performed Tollens test, Fehlings test, and Jones Oxidation to differentiate our unknown between an aldehyde or a ketone. The question I'm stuck on is " older...

Standardization of the Sodium Thiosulfate Solution Make up a standard solution of potassium iodate by accurately “weighing by difference” about 0.1 g of KIO3 and placing it in your 100 mL volumetric flask. Fill the flask to mark with distilled water. Potassium iodate ...
36. ### Chemistry (Acids and Bases)

I just did a lab on Acids and Bases and I am having trouble with the lab questions I was given to complete. Concentration of NaOH: 0.09999 M Volume of NaOH: 3.25 mL # moles of NaOH: 0.325 moles Initial Concentration of Weak Acid: ? (How do we calculate this) Part 2: Hydrolysis...
37. ### math

The Johnson family has been very busy and has not done their laundry for several weeks.The dirty laundry pile consists of 540 item of clothing.They figure they can put on average of 27 pieces of clothing in a single load.How many loads of laundry will the Johnson family have ...
38. ### Chemistry

CONCENTRATION OF NaClO IN COMMERCIAL BLEACH. Bleach comes as 6%(mass/volume) solution of NaClO. Calculate the Molarity of NaClO in bleach to three significant figures ( you need molar mass of NaClO)
39. ### Chemistry

How do I find the rate law? I did a iodine clock lab but i am having trouble finding the rate law equation as well as the slow and fast reactions. I used these materials: Solution 1 o 1.0 grams Starch o 10.0 mL of Acetic Acid o 4.1 grams of Sodium Acetate o Sodium Iodide 1, 2...
40. ### 11th grade CHEMISTRY TITRATION LAB!

i have a tritation lab due tomorrow and i am stumped on a couple things. its a titration lab using sodium hydroxide (NaOH)- 250 mL 0.300 M concentration, 10 mL of an unknown substance of vinegar, the avg. of titrated NaOH in the flask with vinegar is 27.7 mL firstly its a ...
41. ### College Chemistry

I DO NOT understand the following! Please HELP :) 1st Part Substances A, B, and C can all act as oxidizing agents. In solution, A is green, B is yellow, and C is red. In the reactions in which they participate, they are reduced to A-, B-, and C- ions, all of which are ...
42. ### CHEMISTRY

A solution household bleach contains 5.25% NaClO, by mass. Assuming that the density of bleach is the same as water(1.0g/ml). Calculate the volume of household bleach that should be diluted with water to make 500.0 ml of a ph= 10.26 solution. So, the first thing i do was to ...
43. ### chemistry

25ml of 0.01M KIO3 solution were put to react with an excess of KI. 32.04ml of the sodium thiosulfate solution were needed to titrate the triiodide ions that were present . What is the molar concentration of thiosulfate in the solution?
44. ### Chem

Hypothesis: A prediction of what you think the results of the project will be. Write your hypothesis before you begin the experiment and, if the experiment has more than one part, you will need a hypothesis for each section. Remember to create an ‘if-then’ statement. (...
45. ### Science

Which is a better bacteria killer? Bleach or hand sanitizer which contains 62% ethyl alcohol. i'm not sure but i think is the hand sanitizer. hand sanitizer ok thanks. What kind of germs? What temperature? In any case, I think bleach would be hard to beat but I have no proof ...
46. ### chemistry

this is what my lab report looks like (minus the graph of the first part) im stuck on part II I. A. unknown 1 melting point range (uncorr) 50.0-53.0 melting point range (corr) 50.2-53.2 (because of graph from part 1 of experiment) melting point average 51.7 b unknown 2 melting...
47. ### Honors Chemistry

We did a lab in class on Friday where we stuck a metal loop in various chemicals and stuck it in the flame of a Bunsen burner and we observed the flame's colors as the different metals went in. For every lab we do, we have to write a writeup which involves a graph. How could I...

Q. The Johnson family has been very busy and has not done there laundry for several weeks. The dirty laundry pile consists 540 items of clothing. They figure they can put average of 27 pieces of clothing in a single load. How many loads if laundry will the Johnson family have ...
49. ### CHM 300

Experiment: Redox titration;determination of ascorbic acid by an iodometric back-titration Why is sodium carbonate added to the thiosulfate solution ? why is the water used for preparing the thiosulfate solution boiled ?
50. ### gen chem 2

In the chemical kinetics experiment, determine the dilution of the stock bleach solution. The bleach used will be around 5.5% (weight/volume). Convert this to molarity
51. ### Chemistry

The experimentally measured and generally accepted value for the molar volume of Na is about 23 cm3/mol. Which of the following best explains why the value calculated in Part B is significantly smaller than the measured values? Part B Answer 16.3 cm3/mol Which one would it be...
52. ### Chemistry

Hey; I am doing a lab write up that has to do with NMR spectroscopy. Part of it asks to determine how many nonequivalent protons are in the compound 2-chloro-6-methylaniline, among other things. My problem is this is for kinetics class but this part of it has to do with ...
53. ### Chemistry

If you are using 5.25% (mass/mass) bleach solution and you determine that the density of the bleach solution is 1.08 g/mL, how many moles of sodium hypochlorite are present in a 4.00 mL sample?
54. ### Chemistry

If you are using 5.25% (mass/mass) bleach solution and you determine that the density of the bleach solution is 1.08 g/mL, how many moles of sodium hypochlorite are present in a 4.00 mL sample?
55. ### chemistry

I am stuck on this one and was wondering if anyone can help me out! Why does sodium nitrate (166.5) have a bigger molar entropy than sodium bromide (86.8)? Thanks!
56. ### Chemistry

Calculate [ClO^-] in a 6% bleach solution. A 6% bleach solution contains 6 grams of NaClO per 100 grams bleach. The density of 6% bleach is 1.07g/mL.
57. ### Chemistry

Calculate [ClO^-] in a 6% bleach solution. A 6% bleach solution contains 6 grams of NaClO per 100 grams bleach. The density of 6% bleach is 1.07g/mL.
58. ### Chemistry Lab

In chemistry we are doing a lab that involves crucibles and Mg ribbon, we have three days to complete the lab. Anyways do you think it would be alright to substitute the mass of the crucible we had the first day with the mass of the crucible we had today? We know how much the ...
59. ### chemistry

Household bleach contains (NaClO)2 that decomposes in water, NaClO + h2o = Na+ + OH- + Cl2 + O2 If 15ml bleach containing 5.85℅ NaClO is allowed to decomposes completely, then hoe many mL of o2 at 22C and 755mmHg can be liberated. Density of bleach= 1.12g/ml Answer I ...
60. ### chemistry

A stock solution's hypochlorite activity was determined as follows: . - 2.00g of liquid sodium hypochlorite (NaOCl) was weighed into a flask and diluted with 50mL deionized water.10mL of 10% sulfuric acid and 10mL of 10% potasssium iodide were added, followed by titration with...
61. ### Science

What is the scentific formula for Sodium Thiosulphate? What is the mass of a 30 N rock in the school yard? Sodium thiosulfate is Na2S2O3.
62. ### math

a bathroom cleaner contains 1 part of bleach with 4 parts of water. if you need 10 parts of bathroom cleaner, how much water and bleach do you need? If 1 part bleach and 4 parts water = 5 parts, then what do you need to do to get 10 parts? Although this does not solve the ...
63. ### chemistry

I understand part (I) but We have only briefly gone over the HH equation in class and I understand how to use it to get the pH but I really don't understand how to use it in part (II), assuming I should be using it in this question? (I)Calculate the pH of an acetate buffer ...
64. ### chemistry

calculate the numbers of moles of sodium thiosulfate (Na2S2O3) and hence the moles of S2O3^2- ions present in the volume of 43mL can someone plz help me?
65. ### chemistry

calculate the numbers of moles of sodium thiosulfate (Na2S2O3) and hence the moles of S2O3^2- ions present in the volume of 43mL someone plz help
66. ### Chemistry

I'm doing some post lab questions and I'm stuck on one. In lab we performed Tollens test, Fehlings test, and Jones Oxidation to differentiate our unknown between an aldehyde or a ketone. The question I'm stuck on is " older bottles of benzaldehyde are often contaminated with ...
67. ### chemistry

An unidentified compound (A) was reacted with bleach using the same experimental protocol as that performed in the lab. Molecule B was formed. Answering the questions below should allow you to interpret the following information in order to determine the structures of A and B...
68. ### Chemistry

Currently studying for an lab exam. Just have a few question about a typical Iodine Clock reaction lab. In an typical Iodine Clock reaction lab what would be the state of effect of an increase in the initial concentration of thiosulfate ion (S2O3 2-) and the increase in the ...
69. ### Chemistry

Currently studying for an lab exam. Just have a few question about a typical Iodine Clock reaction lab. In an typical Iodine Clock reaction lab what would be the state of effect of an increase in the initial concentration of persulfate ion and the increase in the initial ...
70. ### chemistry,

in analyzing household bleach. I have a flask that contains 10.00 mL diluted bleach + 0.4g KI + 20 mL distilled water and 20 drops of 2M HCl. To that I titrated 30.60 mL Na2S2O3 and I need to calculate the number of moles of NaOCl reacted. This is what I was thinking.. ...
71. ### chemistry

I have a lab finished and I have to find the dehydrated sample (show calculations) and the value of n (show calculations). I just need to know how I go about finding these answers using my data?
72. ### CHEMISTRY> HELP QUICK! pls

1. What is the amount of oxalate in 2 mL of 0.035M solution? a) 7 ¡Á 10¨C2 mole b) 1.75 ¡Á 10¨C2 mole c) 7 ¡Á 10¨C5 mole d) 1.75 ¡Á 10¨C5 mole 2. Sodium oxalate may be prepared by titrating oxalic acid (C2H2O4) with sodium hydroxide, according to the equation: ...
73. ### Chemistry lab

In my lab class I am having to write a lab experiment and preform it tomorrow. It deals with specific heat of unknown metal and density. the first part you have boil water with the metal in it, and then put it in a cup and measure the temp change. I have completed to specific ...
74. ### chemistry

I am trying to answer a bunch of lab questions about a lab I did and am stuck on finding the morality of the diluted vinegar solution? Can anyone help me? (I hope I gave enough info) Here where the lab procedures that I already went through: Transfer 10mls (Vc)of vinegar to a ...
75. ### MOLARITY QUESTION

I am trying to answer a bunch of lab questions about a lab I did and am stuck on finding the morality of the diluted vinegar solution? Can anyone help me? (I hope I gave enough info) Here where the lab procedures that I already went through: Transfer 10mls (Vc)of vinegar to a ...
76. ### Quantum Physics

Has anyone done Block 7-8 for TMA 6 for s103 - discovering Science, as i am struggling big time, any help would be much appreciated yes i am like you really phased by this how much of the tma have you managed to do Me, too what r u stuck on? I have been doing really well but ...
77. ### biology

In a pre-lab for nutrient food testing , I was assigned to answer these questions, but I have no idea what they are talking about. And no, we have not discusses the answers in class. Here are the questions: Answer the following questions: 1. What is a positive standard? 2. ...
78. ### Chemistry (molarity) (sorta an emergency)

I'm doing a titration lab and writing a lab report where I'm sort of stuck on how exactly to find the concentration of HCl. These are the following info I have from the lab, Equation: HCl(aq)+NaOH(aq)-> H2O(l)+NaCl(aq) -Calculated molarity of NaOH solution is .103M -Volume ...
79. ### chemistry

Molar Volume of Sodium If you assume that an atom is a hard sphere, you can estimate the average volume of space it occupies using basic geometry. Question Estimate the volume, V , of a sodium atom ( Na ) using its metallic radius of 186
80. ### Chemistry

I have a question related to oxidizing agents. Why do some oxidizing agents have to be in acid medium? For example the potassium permanganate. I would also like to know if there are other examples of oxidizing agents that have to be in acid medium or where I can find them.
81. ### Dilution

What volume of H2O should be added to 500 ML of a 1.0 mol/L CuSO4 solution to dilute it to 0.5 mol/L? This is what I have so far... H20 + CuSO4 --------> H2SO4 + CuO So you use the formula M1V1 = M2V2 so its (0.500)(1.0) = (0.5)(V) Solve for V, I got 1.0 L. HOWEVER, the ...
82. ### Chemistry Titration Lab HELP!

Hi everyone! I just got a new lab that I MUST complete today, and it's about titration- I have absolutely no clue how to do it, it just doesn't make sense to me! I hope that someone can help explain to me how to do it so I can finish ASAP!! Thanks a lot, -Angel Lab--Titrations...
83. ### Chem

Sodium thiosulfate, Na2S2O3, is an important reagent for titrations. Its solutions can be standardized by titrating the iodine released when a weighed amount of potassium hydrogen iodate, KH(IO3)2 (389.912 g/mol), is allowed to react with excess potassium iodide in acidic ...
84. ### Derivatives

Find f'(x): (abs(((x^2)*((3x+2) ^(1/3)))/((2x-3)^3)) So I thought I should split it into two parts: A and B. A) (x^2)/((2x-3)^2) B) ((3x+2)^(1/3))/(2x-3) My plan was to differentiate each part and then multiply them together, since multiplying their denominators together gives...
85. ### Chemitry

the average adult human male has a total blood volume of 5.0 L. if the concentration of sodium ion in this average individual is 0.135 M, what is the mass of sodium ion circulating in the blood
86. ### Chemistry

Can someone please help me on this two Chemistry questions...they are from my lab....the lab was on Acids and Bases using Red Cabbage Indicator. Q1- How consistent was the cabbage juice indicator for this lab? Discuss the limitations of using red cabbage juice as an indicator ...
87. ### Chemistry Titration Lab

We did not use the volume of the water added initially to the Erlenmeyer in our calculations. Why?
88. ### chemistry

SOMEONE CAN PLZ EXPLAIN IN DETAIL HOW TO SOLVE THIS PROBLEM..THNKS Molar Volume of Sodium If you assume that an atom is a hard sphere, you can estimate the average volume of space it occupies using basic geometry. Question Estimate the volume, V , of a sodium atom ( Na ) using...
89. ### Chemistry 12

Hi, I did the acid-base titration lab with HCl and 0.5M NaOH. I need to calculate the moles of NaOH from molarity of NaOH and the average volume used. My English isn't good but is it asking me to find the moles of NaOH using the molarity of NaOH and the average volume used ...
90. ### Chemi

Photographic film contains silver bromide in gelatin. Once exposed, some of the silver bromide decomposes, producing fine grains of silver. The unexposed silver bromide is removed by treating the film with sodium thiosulfate. Soluble sodium silver thiosulfate (Na3Ag(S2O3)2) is...
91. ### Chemisty

Photographic film contains silver bromide in gelatin. Once exposed, some of the silver bromide decomposes, producing fine grains of silver. The unexposed silver bromide is removed by treating the film with sodium thiosulfate. Soluble sodium silver thiosulfate (Na3Ag(S2O3)2) is...
92. ### science

when you use a graph to solve a problem about how far a car traveled during a specified time during which it was accelerating how many area calculations do you have to make? what is/ are the shape/shapes you are calculating? a. one area calculation, a rectangle b. one area ...
93. ### math

Gisela finished washing 3/4 of her laundry. She washed 1/3 of this laundry today. Use a rectangle to draw a model to match your expression. What fraction of her laundry did she wash today?
94. ### fractions

Gisela finished washing 3/4 of her laundry. She washed 1/3 of this laundry today. Use a rectangle to draw a model to match your expression. What fraction of her laundry did she wash today?
95. ### Physics

When Using A Graph To Solve A Problem About How Far A Car Traveled During Specified Time During Which It Was Accelerating, How Many Area Calculations Do You Have To Make? What Is/are The Shape/shapes You Are Calculating? ( I believe the answer is D) A. One area calculation, a ...
96. ### CHEMISTRY

I'm in the same class as Catie, and we're working on the same lab; however, i chose a different approach. here's what i have below, your help is much appreciated. so i have X= g AgNO3 0.953-x = Ba(NO3)2 therefore .953-X-NO3=? so far I caluclated the % of Ag and Ba in their ...
97. ### chemistry

Lab: Creating a Redox Table Purpose: The purpose of this lab exercise is to construct a table of relative strengths of oxidizing and reducing agents. By completing this exercise, you will see how more extensive tables of relative strengths of oxidizing and reducing agents have...
98. ### Chemistry

a certain brand of laundry aid called "Oxydoodle" is 12.5% (w/w) sodium percarbonate and 87.5% (w/w) sodium carbonate. Calculate the % (w/w) h2o2 in Oxydoodle
99. ### Psychology

I am writing a paper and am stuck on one part can some give me an idea what i am needing. paper in which you analyze the function of emotions as motive. Be sure to address the following items on your analysis: This is the part I am stuck on Analyze at lease two research ...
100. ### Orgo

What volume of 1.20 M nitric acid is needed to convert 5.5g of m-chlorophenol to 3-chloro-2,6-dinitrophenol? I So far I have converted the 5.5g chlorophenol to mols and I got .043 mol. I know Volume * Molarity (1.2M)=moles. At this point I am stuck.