Block in the figure weighs 52.0 . The coefficient of static friction between the block and the surface on which it rests is 0.330. The weight is 5.43 and the system remains at rest

70,759 results

Physics

Block A in the figure weighs 48.0N . The coefficient of static friction between the block and the surface on which it rests is 0.250. The weight w is 6.00N and the system remains at rest. -Find the friction force exerted on block A. -Find the maximum weight w for which the ...

Physics

The system shown in the following figure is in static equilibrium. Find the frictional force exerted on block (m1) given that the mass of block (m1) is 8.90 kg, the mass of block (m2) is 2.59 kg, and the coefficient of static friction between block (m1) and the surface on ...

physics

(a)block A weigh 60N. the coefficient of static friction between the block and the surface on which it rests is 0.25. the weight W is 12N and the system is at equilibrium. find the friction force exerted on block A. (b)find the maximum weight W for which the system will remain...

Physics

Block B in the figure below weighs 713 N. The coefficient of static friction between block and table is 0.20. Assume that the cord between B and the knot is horizontal. Find the maximum weight of block A for which the system will be stationary.

Physics

Block B in the figure weighs 739 N. The coefficient of static friction between block and table is 0.34; angle θ is 26°; assume that the cord between B and the knot is horizontal. Find the maximum weight of block A for which the system will be stationary.

Physics

Block A is 4.5 kg and Block B is 2.25 kg. a. determine the mass of block C that must be placed on block A to keep it from sliding if the coefficient of static friction between block A and the table is 0.2 b. If the coefficient of kinematic friction between the surface and ...

physics

Block B weighs 708 N. The coefficient of static friction between block and table is 0.32. Assume that the cord between B and the knot is horizontal. Find the maximum weight of block A for which the system will be stationary.

Science

A Block rests on a horizontal surface.The normal force is 20 N.The coefficient of static friction between the block and the surface is 0,40 and the coefficient of dynamic friction is 0,20. What Is the magnitude of the frictional force exerted on the block while the block is at...

physics

A large block P executes horizontal simple harmonic motion as it slides across a frictionless surface with a frequency f = 1.7 Hz. Block B rests on it, as shown in the figure, and the coefficient of static friction between the two is ìs=0.64. (b) What is the maximum force of ...

physics

A large block P executes horizontal simple harmonic motion as it slides across a frictionless surface with a frequency f = 1.7 Hz. Block B rests on it, as shown in the figure, and the coefficient of static friction between the two is ìs=0.64. (b) What is the maximum force of ...

@ elena

In the figure the coefficient of static friction between mass (MA) and the table is 0.40, whereas the coefficient of kinetic friction is 0.28 ? part a) What minimum value of (MA) will keep the system from starting to move? part b) What value of(MA) will keep the system moving ...

Physics

A block of mass m1 is on top of a block of mass m2. Block 2 is connected by an ideal rope passing through a pulley to a block of unknown mass m3 as shown. The pulley is massless and frictionless. There is friction between block 1 and 2 and between the horizontal surface and ...

Physics

A block with mass M rests on a frictionless surface and is connected to a horizontal spring of force constant k, the other end of which is attached to a wall. A second block with mass m rests on top of the first block. The coefficient of static friction between the blocks is ...

Physics

Consider the figure below. (Let w1 = 150 N and w2 = 38.0 N.) (a) What is the minimum force of friction required to hold the system of the figure in equilibrium? N (b) What coefficient of static friction between the 150-N block and the table ensures equilibrium? (c) If the ...

physics

One block rests upon a horizontal surface. A second identical block rests upon the first one. The coefficient of static friction between the blocks is the same as the coefficient of static friction between the lower block and the horizontal surface. A horizontal force is ...

physics

the system is in static equilibrium. The coefficient of static friction between the block and the table's surface is = 1/3. The mass of the block that is hanging down is n1 Kg. The tangent of the angle shown in the figure is tan theta = n2. What is the minimum value of mass, ...

Physics (dynamics)

A 47.0 kg slab rests on a frictionless floor. A 18.0 kg block rests on top of the slab. The static coefficient of friction between the block and the slab is 0.50, while the kinetic coefficient of friction is 0.40. The top block is acted upon by a force of 120 N. What is the ...

physics

Consider the system shown in the figure. Block A has weight 4.91 N and block B has weight 2.94 N. Once block B is set into downward motion, it descends at a constant speed. Assume that the mass and friction of the pulley are negligible. Whats the coefficient of kinetic ...

Physics

Block B weighs 716 N. The coefficient of static friction between block and table is 0.31. Assume that the cord between B and the knot is horizontal. Find the maximum weight of block A for which the system will be stationary. The figure has block B on a table and to the right ...

phys

Two blocks of mass m1 = 1.70 kg and m2 = 5.20 kg are connected by a massless cord passing over a frictionless pulley as shown in the figure below, with θ = 41.0°. The coefficient of kinetic friction between block 1 and the horizontal surface is 0.400, and the coefficient...

Physics

A 500 g block on a frictionless surface is attached to a rather limp spring of constant k = 8.7 N/m. A second block rests on the first, and the whole system executes simple harmonic motion with a period of 3.1 s. When the amplitude of the motion is increased to 60 cm, the ...

Physics

A block of mass 0.40 kg rests on the inclined surface of a wedge of mass 7.0 kg. The wedge is acted on by a horizontal force F with arrow and slides on a frictionless surface. a)If the coefficient of static friction between the wedge and the block is µs = 0.30, and the angle ...

physics

4 kg block rests on a smooth horizontal surface,upper surface of 4 kg is rough.A block of mass 2 kg is placed on its upper surface.The acceleration of upper block with respect to earth when 4 kg mass is pulled by a horizontal force of 30N?coefficient of static friction=0.8 and...

Physics

A 4 kg block rests between the floor and a 3 kg block. The 3 kg block is tied to a wall by a horizontal rope. If the coefficient of static friction is 0.800 between each pair of surfaces in contact, what force must be applied horizontally to the 4 kg block to make it move?

physics

A Block has a mass of 50.0 kilograms. the coefficient of static friction between the block and the level floor on which it rests is 0.428 A horizontal force of 618 newtons is applied to the block to the right, as shown. will the block move?

math

A block of mass M1 = 2.7 kg rests on top of a second block of mass M2 = 4.7 kg, and the second block sits on a surface that is so slippery that the friction can be assumed to be zero (see the figure below). (a) If the coefficient of static friction between the blocks is ¦ÌS...

Physics

the only part i cant figure out is the max static friction force that acts on the block. please help show me how to find it Suppose a block with mass 2.00 kg is resting on a ramp. If the coefficient of static friction between the block and the ramp is 0.320, what maximum angle...

physics

As shown in the figure, a block of mass M1 = 0.470 kg is initially at rest on a slab of mass M2 = 0.850 kg, and the slab is initially at rest on a level table. A string of negligible mass is connected to the slab, runs over a frictionless pulley on the edge of the table, and ...

Physics

A block with mass M = 5.00 kg rests on a frictionless table and is attached by a horizontal spring (k = 130 N/m) to a wall. A second block, of mass m = 1.25 kg rests on top of M. The blocks are displaced by 10 cm then released. If the coefficient of static friction between the...

Physics

A 5.00-kg block is placed on top of a 10.0-kg block which rests on a horizontal surface. The 5.00-kg block is tied to a wall with a horizontal string. A 45.0-N horizontal force directed away from the wall is then exerted on the 10.0-kg block. The coefficient of kinetic ...

physics

an 85kg concrete block rests on a flat surface with coefficient of static friction=0.42. find the maximum force that can pull on the block with, angle of 38 degrees above the horizontal without moving the block?

physics

an 85kg concrete block rests on a flat surface with coefficient of static friction us=0.42. find the maximum force that can pull on the block with, angle of 38 degrees above the horizontal without moving the block?

Physics

A block of mass m = 2.00 kg rests on the left edge of a block of mass M = 8.00 kg. The coefficient of kinetic friction between the two blocks is 0.300, and the surface on which the 8.00- kg block rests is frictionless. A constant horizontal force of magnitude F = 10.0 N is ...

physics

A 450 g block is at rest on a horizontal surface. The coefficient of static friction between the block and the surface is 0.670, and the coefficient of kinetic friction is 0.380. A force of magnitude P pushes the block forward and downward as shown in the figure below. Assume ...

Physics

Block B in the figure(Figure 1) rests on a surface for which the static and kinetic coefficients of friction are 0.65 and 0.40, respectively. The ropes are massless.What is the maximum mass of block A for which the system is in equilibrium? (Consider the state of the system ...

Physics

A block of mass M1=2.9 kg rests on top of a second block of mass2=5.5 kg, and the second block sits on a surface that is so slippery that the friction can be assumed to be zero. Question: (a) if the coefficient of static friction between the blocks is 0.21, how much force can ...

physics

Block A (Mass = 5.195 kg) and Block B (Mass = 3.330 kg) are attached by a massless string as shown in the diagram. Block A sits on a horizontal tabletop. There is friction between the surface and Block A. The string passes over (you guessed it) a frictionless, massless pulley...

physics

A 4.170 kg block of wood rests on a steel desk. The coefficient of static friction between the block and the desk is μs = 0.505 and the coefficient of kinetic friction is μk = 0.255. At time t = 0, a force F = 12.7 N is applied horizontally to the block. State the ...

Physics

A 4.500 kg block of wood rests on a steel desk. The coefficient of static friction between the block and the desk is μs = 0.455 and the coefficient of kinetic friction is μk = 0.155. At time t = 0, a force F = 12.4 N is applied horizontally to the block. State the ...

physics

A 6.110 kg block of wood rests on a steel desk. The coefficient of static friction between the block and the desk is μs = 0.455 and the coefficient of kinetic friction is μk = 0.255. At time t = 0, a force F = 16.8 N is applied horizontally to the block. State the ...

Static Friction..I really Have no Idea

A 0.40 kg block rests on a desk. The coefficient of static friction is 0.20. You push the side of the block but do not have a spring scale to measure the force you use. The block does not move. Which statement is true about the force of static friction? It is no larger than 0....

Physics

A 5.00-kg block is placed on top of a 12.0-kg block that rests on a frictionless table. The coefficient of static friction between the two blocks is 0.650. What is the maximum horizontal force that can be applied before the 5.00-kg block begins to slip relative to the 12.0-kg ...

physics

an 85kg concrete block rests on a flat surface with coefficient of static friction us=0.42. find the maximum force that can pull on the block with, angle of 38 degrees above the horizontal without moving the block? please help and show work

physics (question impossible to solve)

an 85kg concrete block rests on a flat surface with coefficient of static friction us=0.42. find the maximum force that can pull on the block with, angle of 38 degrees above the horizontal without moving the block?

Physics/Math

A 17 N horizontal force F pushes a block weighing 6.0 N against a vertical wall. The coefficient of static friction between the wall and the block is 0.68, and the coefficient of kinetic friction is 0.48. Assume that the block is not moving initially. Will the block move? In ...

physics

A block with mass = 5.0 rests on a frictionless table and is attached by a horizontal spring ( = 130N ) to a wall. A second block, of mass = 1.35 , rests on top of the block . The coefficient of static friction between the two blocks is 0.40. What is the maximum possible ...

physics

A block with mass = 5.0 rests on a frictionless table and is attached by a horizontal spring ( = 130N ) to a wall. A second block, of mass = 1.35 , rests on top of the block . The coefficient of static friction between the two blocks is 0.40. What is the maximum possible ...

physics

A 450 g block is at rest on a horizontal surface. The coefficient of static friction between the block and the surface is 0.670, and the coefficient of kinetic friction is 0.380. A force of magnitude P pushes the block forward and downward as shown in the figure below. Assume ...

physics

A 4.85-kg block is placed on top of a 12.0-kg block that rests on a frictionless table. The coefficient of static friction between the two blocks is 0.645. What is the maximum horizontal force that can be applied before the 4.85-kg block begins to slip relative to the 12.0-kg ...

Physics

A 6.99-kg block is placed on top of a 12.9-kg block that rests on a frictionless table. The coefficient of static friction between the two blocks is 0.565. What is the maximum horizontal force that can be applied before the 6.99-kg block begins to slip relative to the 12.9-kg ...

physics- please !

A 3.0kg- block sits on top of a 5.0kg block which is on a horizontal surface. The 5.0-kg block is pulled to the right with a force as shown in the figure . The coefficient of static friction between all surfaces is 0.65 and the kinetic coefficient is 0.42. PART A: What is the ...

physics- please !

A 3.0kg- block sits on top of a 5.0kg block which is on a horizontal surface. The 5.0-kg block is pulled to the right with a force as shown in the figure . The coefficient of static friction between all surfaces is 0.65 and the kinetic coefficient is 0.42. PART A: What is the ...

engineering mechanics

A block P weighing 200KN rests on the top of the block Q of weight 300KN and they are connected by a common string passing around a frictionless pulley S which is tied to a vertical wall by a horizontal string as shown if the coefficient of friction between the rubbing ...

Physics

A 5.1- kg concrete block rests on a level table. A 3.4- kg mass is attached to the block by a string passing over a light, frictionless pulley. If the acceleration of the block is measured to be 1.3 m/s2, what is the coefficient of friction between the block and the table? ...

physics

A 3.0kg- block sits on top of a 5.0kg block which is on a horizontal surface. The 5.0-kg block is pulled to the right with a force as shown in the figure . The coefficient of static friction between all surfaces is 0.65 and the kinetic coefficient is 0.42. Part a: What is the ...

Physics

If a block of mass 10.0 kg rests on a horizontal surface, and the coefficient of static friction is 0.300, what is the maximum static friction that can act on the block? If you could walk me step by step on completing this problem, I would be extremely grateful and it would be...

high school physics static friction

The system shown below is in equilibrium. Using the fact that block A is placed on a table, has a normal force of 40.2 N and it is not moving, what is the coefficient of static friction on block A? I know you can't answer this but if you have any suggestions: Calculate the ...

Physics

The blocks A and B are connected by a piece of spring. Block B rests on an inclined plane of 40° and block A hangs vertically. The coefficient of kinetic friction between block A and the inclined plane is 0.29. Calculate the acceleration of the system if the mass of block A ...

physics

1. The weight in the following diagram has a mass of 0.750 kg and the cart has a mass of 0.52 kg. There is a friction force of 2.1 N acting on the cart. What is the tension in the string? a. 4.4 N b. 4.3 N c. 4.1 N d. 4.2 N 2. An 8.5 kg block is attached to a weight. The ...

Physics

What force must be exerted on block A in order for block b not to fall. The coefficient of static friction between block A and B is 0.55, and the horizontal surface is frictionless.

physics

The density of an unspecified material is 3.27 g/cm (cubed) . if the mass of a block of this material is 10.9kg, what is the volume of the block in cubic meters? A Wooden block is pulled to the right across a level surface at a constant velocity by a force of 47 Newtons, the ...

Physics(IMPORTANT)

A block of mass m = 2 kg on a horizontal surface is connected to a spring connected to a wall (see figure). The spring has a spring constant k =10 N/m. The static friction coefficient between the block and the surface is mμs =0.7 , and the kinetic friction coefficient is m...

Physics plz help :(

Q.) A block of mass m=2 kg on a horizontal surface is connected to a spring connected to a wall (see figure). The spring has a spring constant k= 18 N/m. The static friction coefficient between the block and the surface is μs= 0.7 , and the kinetic friction coefficient is...

Physics

A 0.5 kg wooden block is placed on top of a 1.0 kg wooden block. The coefficient of static friction between the two blocks is 0.35. The coefficient of kinetic friction between the lower block and the level table is 0.2. What is the maximum horizontal force that can be applied ...

Physics

the coefficient of friction between block A and the horizontal surface is 0.43. What must be the weight of the hanging block B if this block is to descend at constant speed once it has been set into motion? Mass of block A is 5.0 kg

physics

A block of a mass of 1 kg rests on the inclined surface of a wedge of a mass of 2.2 kg. The wedge is acted upon by a horizontal force F and slides on a frictionless surface. The acceleration of gravity is 9.81 m/s^2. If the coefficient of static friction between the wedge and ...

Physics

A wooden block with mass 0.26{\rm kg} rests on a horizontal table, connected to a string that hangs vertically over a friction-less pulley on the table's edge. From the other end of the string hangs a 0.20{\rm kg} mass. What minimum coefficient of static friction \mu _{{\rm s...

physics

A 10-KG block is pulled along a rough horizontal floor by a 12-N force acting at a 30 degrees angle with respect to the horizontal. The block accelerates at 0.1 m/s2. Calculate A....... the weight of the block B...... the force of friction acting on the block C.... the normal ...

physics

A 10-KG block is pulled along a rough horizontal floor by a 12-N force acting at a 30 degrees angle with respect to the horizontal. The block accelerates at 0.1 m/s2. Calculate A....... the weight of the block B...... the force of friction acting on the block C.... the normal ...

Physics

A 10-KG block is pulled along a rough horizontal floor by a 12-N force acting at a 30 degrees angle with respect to the horizontal. The block accelerates at 0.1 m/s2. Calculate A....... the weight of the block B...... the force of friction acting on the block C.... the normal ...

physics

a 4.00 kg block rests on a 30.0 incline. If the coefficient of static friction between the block and the incline is 0.700, what magnitude horizontal force F must act on the block to start it moving up the incline

Physics

A 3.66 kg block is placed on an inclined surface that makes an angle of 18.5° relative to horizontal. The coefficients of static and kinetic friction between the block and surface are 0.534 and 0.239, respectively. The block remains at rest when released. What is the ...

Physics

The figure is just mass A on top of mass B. There are no forces or anything shown. Block A, of mass 3.2 kg, is on block B, of mass 7 kg, as shown in the above figure. The lower block is on a frictionless surface while the coefficient of static friction is 0.25 between the two ...

Physics

two blocks aA and B are placed as in figure, and connected by ropes to block C. Blocks A and B weigh 20 N each and the coefficient of kinetic friction between each block and surface is .40. Block C descends with an acceleration of 2 m/s2... A. Find the tension in the ropes B. ...

Physics

A 4.00-kg block rests on a 30.0° incline. If the coefficient of static friction between the block and the incline is 0.700, what magnitude horizontal force F must act on the block to start it moving up the incline, given g= 9.80m/s^2?

Physics, Science

A 26 kg block is connected to an empty 1 kg bucket by a cord running over a frictionless pulley. The coefficient of static friction between the table and the block is 0.435 and the coefficient of kinetic friction between the table and the block is 0.320. Sand is gradually ...

Phsics

What force must be exerted on block A in order for block b not to fall. The coefficient of static friction between block A and B is 0.55, and the horizontal surface is frictionless. A= 100kg and B=10kg A is on the horizontal surface and B is attached to A.

Physics

What force must be exerted on block A in order for block b not to fall. The coefficient of static friction between block A and B is 0.55, and the horizontal surface is frictionless. A= 100kg and B=10kg A is on the horizontal surface and B is attached to A.

Physics

Assume a block on unknown weight rests on an incline of 25 degrees and is initially not moving. What push (P) is required to start moving the block if the coefficient of static friction is 0.7?

Physics

Assume a block on unknown weight rests on an incline of 25 degrees and is initially not moving. What push (P) is required to start moving the block if the coefficient of static friction is 0.7?

physics

A 3.3 kg wooden block is placed on 22 degree inclined plane and is connected by a string that passes over a light friciton less pulley at the top of the incline and then attached to a hanging 3.0kg block.If the coefficient of static friction bet the 1st block and the surface ...

Physics

A 3.3 kg wooden block is placed on 22 degree inclined plane and is connected by a string that passes over a light friciton less pulley at the top of the incline and then attached to a hanging 3.0kg block.If the coefficient of static friction bet the 1st block and the surface ...

Physics for Life science

1. A block of mass m=100kg rests on a level ground. With what force, parallel to the ground, must you push the block so that it is just ready to start sliding? The coefficient of static friction between the block and the ground is 0.40.

Physics for Life science

1. A block of mass m=100kg rests on a level ground. With what force, parallel to the ground, must you push the block so that it is just ready to start sliding? The coefficient of static friction between the block and the ground is 0.40.

PHYSICS

A block with mass m1 = 9.0 kg is on an incline with an angle θ = 32.0° with respect to the horizontal. For the first question there is no friction, but for the rest of this problem the coefficients of friction are: μk = 0.28 and μs = 0.308. To keep the mass ...

Physics

1. The weight in the following diagram has a mass of 0.750 kg and the cart has a mass of 0.52 kg. There is a friction force of 2.1 N acting on the cart. What is the tension in the string? a. 4.4 N b. 4.3 N c. 4.1 N d. 4.2 N 2. An 8.5 kg block is attached to a weight. The ...

Physics

A bullet with a velocity of 200 m/s is shot at a 2-kg block resting on a horizontal frictionless surface. The bullet imbeds in the block and the bullet-block system slides across the surface with a speed of 5 m/s. A) what is the mass of the bullet? B)The coefficient of ...

Physics

A 6.40 kg block rests on a 12.5 kg block as shown in the diagram. The interface between the lower mass and the table is frictionless, but there is friction (static friction μS and kinetic friction μK) between the two blocks. A horizontal force F r acts on the UPPER ...

physics

A 17 N horizontal force F pushes a block weighing 3.0 N against a vertical wall. The coefficient of static friction between the wall and the block is 0.65, and the coefficient of kinetic friction is 0.45. Assume that the block is not moving initially. (a) Will the block move? ...

physics

A 12 N horizontal force pushes a block weighing 5.0 N against a vertical wall (Fig. 6-26).The coefficient of static friction between the wall and the block is 0.60, and the coefficient of kinetic friction is 0.40. Assume that the block is not moving initially. (a) Will the ...

physics

A block with mass = 5.0 rests on a frictionless table and is attached by a horizontal spring ( = 130 ) to a wall. A second block, of mass = 1.35 , rests on top of . The coefficient of static friction between the two blocks is 0.40. What is the maximum possible amplitude of ...

physics

A block with mass = 5.0 rests on a frictionless table and is attached by a horizontal spring ( = 130 ) to a wall. A second block, of mass = 1.35 , rests on top of . The coefficient of static friction between the two blocks is 0.40. What is the maximum possible amplitude of ...

physics

The 2 kg block in Figure 7-25 slides down a frictionless curved ramp, starting from rest at a height of h = 3 m. The block then slides d = 12 m on a rough horizontal surface before coming to rest. Figure 7-25 (a) What is the speed of the block at the bottom of the ramp? (b) ...

Physics

When the three blocks in the figure below are released from rest, they accelerate with a magnitude of 0.370 m/s2. Block 1 has mass M, block 2 has 5M, and block 3 has 5M. What is the coefficient of kinetic friction between block 2 and the table? block 1 is haging off the table ...

friction

A 40 kg slab rests on a friction less floor.a 10 kg block rests on top of the slab.the coefficient kinetic friction between the block and the slab is 0.40.a horizontal force of 100N is applied on the 10 kg block.find the resulting acceleration of the slab.

Physics

The two blocks (m = 37 kg and M = 109 kg) in the figure below are not attached to each other. The coefficient of static friction between the blocks is µs = 0.55, but the surface beneath the larger block is frictionless. What is the minimum magnitude of the horizontal force ...

physics

Question # 1 : What is the maximum acceleration a car can undergo if the coefficient of static friction between the tires and the ground is 0.82? Question # 2 : A 1.5-kg block rests on top of a 7.5kg block. The cord and pulley have negligible mass, and there is no significant ...

physics

Question # 1 : What is the maximum acceleration a car can undergo if the coefficient of static friction between the tires and the ground is 0.82? Question # 2 : A 1.5-kg block rests on top of a 7.5kg block. The cord and pulley have negligible mass, and there is no significant ...

physics

Question # 1 : What is the maximum acceleration a car can undergo if the coefficient of static friction between the tires and the ground is 0.82? Question # 2 : A 1.5-kg block rests on top of a 7.5kg block. The cord and pulley have negligible mass, and there is no significant ...

physics

Question # 1 : What is the maximum acceleration a car can undergo if the coefficient of static friction between the tires and the ground is 0.82? Question # 2 : A 1.5-kg block rests on top of a 7.5kg block. The cord and pulley have negligible mass, and there is no significant ...

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. 21
  22. 22
  23. 23
  24. 24
  25. 25
  26. 26
  27. 27
  28. 28
  29. 29
  30. 30
  31. 31
  32. 32
  33. 33
  34. 34
  35. 35
  36. 36
  37. 37
  38. 38
  39. 39
  40. 40
  41. 41
  42. 42
  43. 43
  44. 44
  45. 45
  46. 46
  47. 47
  48. 48
  49. 49
  50. 50
  51. 51
  52. 52
  53. 53
  54. 54
  55. 55
  56. 56
  57. 57
  58. 58
  59. 59
  60. 60
  61. 61
  62. 62
  63. 63
  64. 64
  65. 65
  66. 66
  67. 67
  68. 68
  69. 69
  70. 70
  71. 71
  72. 72
  73. 73
  74. 74
  75. 75
  76. 76
  77. 77
  78. 78
  79. 79
  80. 80
  81. 81
  82. 82
  83. 83
  84. 84
  85. 85
  86. 86
  87. 87
  88. 88
  89. 89
  90. 90
  91. 91
  92. 92
  93. 93
  94. 94
  95. 95
  96. 96
  97. 97
  98. 98
  99. 99
  100. 100