A 2.5 kg block of ice at a temperature of 0.0 degrees Celcius and an initial speed of 5.7 m/s slides across a level floor. If 3.3 x 10^5 J are required to melt 1.0 kg of ice, how much

72,835 results

physics

A 2.5 kg block of ice at a temperature of 0.0 degrees Celcius and an initial speed of 5.7 m/s slides across a level floor. If 3.3 x 10^5 J are required to melt 1.0 kg of ice, how much ice melts, assuming that the initial kinetic energy of the ice block is entirely converted to...

Physics

A 2.5 kg block of ice at a temperature of 0C and an initial speed of 5.7 m/s slides across a level floor. If 3.3*10^5 J are required to melt 1.0 kg of ice, how much ice melts, assuming that the initial kinetic energy of the ice block id entirely converted to the ice's internal...

physics

A 2.6 kg block of ice at a temperature of 0.0C and an initial speed of 5.3 m/s slides across a level floor. If 3.3 × 105 J are required to melt 1.0 kg of ice, how much ice melts, assuming that the initial kinetic energy of the ice block is entirely converted to the ice’s ...

Physics

An aluminum block slides along a horizontal surface. The block has an initial speed of 11.6 m/s and an initial temperature of 10.7°C. The block eventually slides to rest due to friction. Assuming all the initial kinetic energy is converted to heat energy and all this energy ...

physics

An 8.7 kg block slides with initials speed of 1.66 m/s across a level floor. How far does the block slide before it comes to rest!? I used F= m(v(sq)/2s)...is that right?

Physics 1

A horizontal force of 30 N pulls a block of mass 2.5 kg across a level floor. The coefficient of kinetic friction between the block and the floor is μK = 0.25. If the block begins with a speed of 2.0 m/s and is pulled for a distance of 18 m, what is the final speed of the...

Repost-Physics 1

A horizontal force of 30 N pulls a block of mass 2.5 kg across a level floor. The coefficient of kinetic friction between the block and the floor is ìK = 0.25. If the block begins with a speed of 2.0 m/s and is pulled for a distance of 18 m, what is the final speed of the ...

Physics

A 10 g bullet is fired into a 5 kg wooden block initially at rest on the floor. The bullet lodges in the block and the block slides 10 cm across the floor before coming to rest. If the coefficient of kinetic friction between the block and the floor is 0.5 what was the speed of...

Chemistry

How do you calculate the molality of a salt solution using only temperature? Is it even possible to do so? This was part of an ice cream lab and the temperature of the ice was 1.0 degrees celcius and the temperature of the ice water salt mixture was -0.4 degrees celcius but ...

science

Fifty grams of ice at 0 degrees celcius is added to 200grams of water at 40 degrees celcius contained in a 100 grams copper calorimeter. If the final temperature of the mixture is 16 degrees celcius, find the heat of fusion of ice.

physics

An 8.56 kg block of ice at 0 degrees celsius is sliding on a rough horizontal icehouse floor (also at 0 degrees celsius) at 15.6 m/s. Assume that half of any heat generated goes into the floor and the rest goes into the ice. How much ice (in kg) has melted after the speed of ...

Chemistry

How many joules of heat are needed to heat 25.0 g of ice at -5.0 degrees celcius to a final temperature of 40.0 degrees celcius? The specific heat of ice is 2.1 j. Our teacher mention to consider the state of water present at 40.0 degrees celcius which is confusing me. Any ...

Physics

A 2.95 kg block on a horizontal floor is attached to a horizontal spring that is initially compressed 0.0330 m. The spring has force constant 900 N/m. The coefficient of kinetic friction between the floor and the block is 0.42 . The block and spring are released from rest and ...

physics

A 6 kg box with initial speed 5 m/s slides across the floor and comes to a stop after 1.4 s. a.What is the magnitude of the average net force on the box? b.You put a 3 kg block in the box, so the total mass is now 9 kg, and you launch this heavier box with an initial speed of ...

General Chemistry II

A quantity of ice at 0 degrees celcius is added to 64.3 grams of water in a glass at 55 degrees celcius. After the ice melted, the temperature of the water in the glass was 15 degrees celcius. How much ice was added? The heat of fusion of water is 6.01kJ/mole and the heat of ...

physics

A 0.6 kg block of ice is sliding by you on a very slippery floor at 2.5 m/s. As it goes by, you give it a kick perpendicular to its path. Your foot is in contact with the ice block for 0.0035 seconds. The block eventually slides at an angle of 24 degrees from its original ...

Physics

A small block slides along a track from one level to a higher level, by moving through an intermediate valley (see Figure). The track is frictionless until the block reaches the higher level. There a frictional force stops the block in a distance d. Assume that the block's ...

Physics

block of mass 3.5 kg slides down frictionless incline that is 10 m long and inclined at angle of 37 when reaches bottom of incline it collides perfectly inelastically with another block of mass 2 kg then slides along a level floor if coefficient of friction between the block ...

physics

A 5.0 MULTIPLIED BY 10 TO THE POWER OF 2g aluminium block is heated to 350 degrees celcius. determine the number of kilograms of ice at 0 degrees celcius that the aluminium block will melt as it cools.

Chemistry

A 62g piece of ice at 0 degrees celcius is added to a sample of water at 9 degrees celcius. All of the ice melts and the temperature of the water decreases to 0 degrees celcius. How many grams of water were in the sample

physics

Starting from rest, a 10.7 kg block slides 2.60 m down to the bottom of a frictionless ramp inclined 30.0° from the floor. The block then slides an additional 4.70 m along the floor before coming to a stop. (a) Determine the speed of the block at the bottom of the ramp. m/s (...

ap physics

Starting from rest, a 10.2 kg block slides 2.90 m down a frictionless ramp (inclined at 30.0° from the floor) to the bottom. The block then slides an additional 4.80 m along the floor before coming to a stop. Determine the coefficient of kinetic friction between block and floor.

physics

an ice skater applies a horizontal force to a 20 kg block on frictionless, level ice causing the block to accelerate uniformly at 1.4 m/s^2 to the right. after the skater stops pushing the block it slides onto a region of ice that is covered with a thin layer of sand. the ...

Math

An object is heated to 90 degrees Celcius and is then allowed to cool in a room whose air temperature is 25 degrees celcius. If the temperature of the object is 75 degrees celcius after 10 minutes, when will its temperature be 50 degrees celcius? I have no idea how to do this...

Math

An object is heated to 90 degrees Celcius and is then allowed to cool in a room whose air temperature is 25 degrees celcius. If the temperature of the object is 75 degrees celcius after 10 minutes, when will its temperature be 50 degrees celcius? I have no idea how to do this...

phyisics

A 0.5kg object is given an initial velocityof 3m/s after when it slides a distance of 8m across a level floor whatis the coefficient of kinetic friction between the object and the floor

Physics

A 100g piece of ice at 0 degrees celcius is placed into a container holding 200g of water, initially at temperature 25 degrees celcius. Heat flows from the water to the ice, cooling the water and melting the ice. Calculate a) how many moles of ice and how many moles of water ...

physics

In Figure 8-50, a block slides along a track from one level to a higher level after passing through an intermediate valley. The track is frictionless until the block reaches the higher level, where a frictional force stops the block in a distance d. The block's initial speed ...

Physics

A 2.0 kg block of iron slides along a floor, decreasing its speed from 4.0 m/s to 1.0 m/s. a) How much work does the frictional resistance of the floor do on the block? b) If the reduction in velocity occurred over a distance of 10 m, what was the force of friction acting on ...

Physics

Two blocks are released from the same height above the floor. Block A slides through a less inclined track to the floor, whereas block b slides on more inclined track to the floor. Assume no friction.Which block gets to the bottom(floor) of the incline first? Explain?

physics

A COPPER BLOCK ,MASS 500g AND AT 200 DEGREES CELCIUS GIVES OUT ENERGY AT AN AVERAGE RATE OF 50W. (i)what is temperature after 5 min ? (ii)how long will it take before its temperature drops to 50 degrees celcius

Physics Kinematics

A puck slides across a smooth, level tabletop at height H at a constant speed Vo. It slides off the edge of the table and hits the floor a distance x away. What is the algebraic relationship between the distances x and H?

Math

An object is heated to 90 degrees Celcius and is then allowed to cool in a room whose air temperature is 25 degrees celcius. If the temperature of the object is 75 degrees celcius after 10 minutes, when will its temperature be 50 degrees celcius?

physics

When a block of ice at zero degrees Celcius melts, the ice absorbs energy from its environment. As the ice is melting, the temperature of the block (remains the same, increase decrease) I think it remains the same. A sample of liquid ethyl alcohol is boiling. As more heat is ...

physics

A 0.55 kg block of ice is sliding by you on a very slippery floor at 4 m/s. As it goes by, you give it a kick perpendicular to its path. Your foot is in contact with the ice block for 0.0025 seconds. The block eventually slides at an angle of 23 degrees from its original ...

Physics

A 4 kg block slides down a frictionless incline making an angle of 60° with the horizontal. (a) What is the total work done on the block when the block slides 2 m (measured along the incline)? (b) What is the speed of the block after it has slid 1.5 m if it starts from rest...

physics

0.2 kg of ice at 0 degrees celcius is mixed with 500g of water at 25 degrees celcius. What is the resulting temperature?

Physics

block slides across table with initial speed of 8 m/s coefficient of friction between block and table is .5 and table is 4 m long and 1.2 m high determine how far the block lands from the base of the table

Physics

How many grams of ice must be added to 100 grams of water at 60 degrees so that its temperature drops to 20 degrees celcius? As far as i know I have to use: (Mass)*(specific heat of water) *(finaltemperature - initial temperature = ??

Chemistry

How much heat is required to raise the temperature of a 125g block of iron from 17.5 degrees celcius to 82.3 degrees celcius?

Chemistry

How much heat is required to raise the temperature of a 35.0g block of aluminium from 125 degrees celcius to 322 degrees celcius?

Physics

A 1000N crate is being pushed across a level floor at a constant speed by a force F of 300N at an angle of 20.0 degrees. (a) What is the coefficient of kinetic friction between the crate and the floor? (b) If the 300-N force is instead pulling the block at an angle of 20.0 ...

Physics

A 1000N crate is being pushed across a level floor at a constant speed by a force F of 300N at an angle of 20.0 degrees. (a) What is the coefficient of kinetic friction between the crate and the floor? (b) If the 300-N force is instead pulling the block at an angle of 20.0 ...

Physics B

A 40-kg block of ice at 0°C is sliding on a horizontal surface. The initial speed of the ice is 7.0 m/s and the final speed is 4.7 m/s. Assume that the part of the block that melts has a very small mass and that all the heat generated by kinetic friction goes into the block ...

physics

A 40-kg block of ice at 0°C is sliding on a horizontal surface. The initial speed of the ice is 7.0 m/s and the final speed is 4.7 m/s. Assume that the part of the block that melts has a very small mass and that all the heat generated by kinetic friction goes into the block ...

physics

a 1 kg dart moving horizntally at 10 m/s sticks to a wood block of mass 9 kg which slides across a friction free level surface. what is the speed of the block and dart after collision?

College Physics

A 2.30-cm-thick wood floor covers a 4.0 m x 5.5 m room. The subfloor on which the flooring sits is at a temperature of 16.4 degrees celcius, while the air in the room is at 19.3 degrees celcius. What is the rate of heat conduction through the floor? Use 0.200 W / m x K for the...

Chem 103

a piece of gold is heated to 100 degrees celsius. A piece of copper is chilled in an ice bath to 0 degrees celsius. Both pieces of metal are placed in a beaker containing 150 g of water at 20 degrees celcius. Will the temperature of the water be greater than or less than 20 ...

PHYSICS

A 5.00-kg box slides 7.00 m across the floor before coming to rest. What is the coefficient of kinetic friction between the floor and the box if the box had an initial speed of 3.00 m/s?

physics

A piece of iron block moves across a rough horizontal surface before coming to rest. The mass of the block is 1.8 kg, and its initial speed is 3.8 m/s. How much does the block's temperature increase, if it absorbs 69% of its initial kinetic energy as internal energy? The ...

physics

Ice at -10degrees celcius and steam at 130 degrees celcius are brought together at atmospheric pressure in a perfectly insulated container. After thermal equilibrium is reached,the liquid phase at 50 degrees celcius is present. Ignoring the container and the equilibrium vapor ...

chem

What is the final temperature (degrees celcius) of 1.36g of water with an initial temperature of 23.0degrees celcius after 6.420J of heat is added to it?

Physics

Which of the following forces does NOT have a zero work done on the object. Choices The normal force on a box that slides across a horizontal level floor. The weight on a box that slides across a horizontal level floor. The normal force on a box that slides down an inclined ...

chemistry

What is the heat evolved of oxalic acid if the temperature change initial is 28 degrees celcius and the final is 29 degrees celcius and the change in temperature is 1 degree celcius,what is the heat capacity of axolic acid

science

A heat exchanger is used to warm apple cider using steam as the heat source. The cider is heated from an initial temperature of 4 degrees celcius to a final temperature of 65 degree celcius. The steam enters the heat exchanger as 50% quality steam and exits as water condensate...

Food Chemestry

A heat exchanger is used to warm apple cider using steam as the heat source. The cider is heated from an initial temperature of 4 degrees celcius to a final temperature of 65 degree celcius. The steam enters the heat exchanger as 50% quality steam and exits as water condensate...

Physics

Which of the following forces does NOT have a zero work done on the object: a)The normal force on a box that slides across a horizontal level floor. b)The weight on a box that slides across a horizontal level floor. c)The normal force on a box that slides down an inclined ...

Physics

A 100 lb block of ice slides down an incline 5.0 ft long and 3.0 ft high. A worker pushes up on the ice parallel to the incline so that it slides down at constant speed. The coefficient of friction between the ice and the incline is 0.10. Find (a) the force exerted by the ...

Physics

A 100 lb block of ice slides down an incline 5.0 ft long and 3.0 ft high. A worker pushes up on the ice parallel to the incline so that it slides down at constant speed. The coefficient of friction between the ice and the incline is 0.10. Find (a) the force exerted by the ...

Physics

A 100 lb block of ice slides down an incline 5.0 ft long and 3.0 ft high. A worker pushes up on the ice parallel to the incline so that it slides down at constant speed. The coefficient of friction between the ice and the incline is 0.10. Find (a) the force exerted by the ...

science

A copper calorimeter of mass 150g, was half filled with water of mass 300g and temperature 0 degrees celcius. 5g of ice at 0 degrees celcius was added to the content, later some quanity of steam was passed into the mixture and the temperature rose by 20 degrees celcius. ...

physics

An 8.65-kg block slides with an initial speed of 1.52 m/s up a ramp inclined at an angle of 27.6° with the horizontal. The coefficient of kinetic friction between the block and the ramp is 0.56. Use energy conservation to find the distance the block slides before coming to rest.

Math

This expression 1.8C + 32, show how to convert from degrees Celcius to degrees Fahrenheit, where C represents the temperature in degrees Celcius. What is the temperature in degrees Farrenheit when the temperature is 25 degrees Celsius?

Grade 12 Chemistry

If 100g of zinc (c=377J/kg degrees celcius) at 95 degrees celcius is dropped into 60g of water contained in a 100g calorimeter (c=419J/kg degrees celcius) at 20 degrees celcius, what will the final temperature be?

Physics

An 8.74-kg block slides with an initial speed of 1.52 m/s down a ramp inclined at an angle of 27.0° with the horizontal. The coefficient of kinetic friction between the block and the ramp is 0.64. Use energy conservation to find the distance the block slides before coming to ...

Physics

An 8.70 kg block slides with an initial speed of 1.56 m/s **down** a ramp inclined at an angle of 28.4 with the horizontal. The coefficient of kinetic friction between the block and the ramp is 0.62. Use energy conservation to find the distance the block slides before coming ...

Physics

A block of ice at 0 degrees C, whose mass is initially 40.0 kg, slides along a horizontal surface, starting at a speed of 5.26 m/s and finally coming to rest after traveling 22.5 m. Compute the mass of ice melted (in grams) as a result of friction between the ice and the ...

physics

a bar is pushed so that it slides across the floor. how far will it go, given the coefficient of kinetic friction is 0.25, and the push imparts an initial speed of 2.5m/s?

physics

Hi, ive been trying to get this problem for a couple of days now but i have no idea of what to do. A very slippery block of ice slides down a smooth ramp tilted at angle pheta. a)The ice is released from rest at vertical height h above the bottom of the ramp. Find an ...

Chemistry

A 35.0 g block of copper at 350.0 degrees celcius is added to a beaker containing 525 g of water at 35.0 degrees celcius. What is the final temperature of water?

science

a 100.0 gram metal sample is heated to a temperature of 110 degrees celcius then placed into a calorimeter containing 100.0 r of pure water (at initial temperature of 23 degrees celcius). after the sample and water reach thermal equalibrium, their final temperature is 29 ...

physics

suppose that a horizontal force of 0.7 n is required to pull a 5.0 kg block across the table at constant speed. what is the initial speed of a 20 g bullet, fired horizontally into the block, if the bullet imbeds in the initially stationary block and causes the block to slide 1...

College Physics

An 8.67-kg block slides with an initial speed of 1.50 m/s down a ramp inclined at an angle of 27.1° with the horizontal. The coefficient of kinetic friction between the block and the ramp is 0.65. Use energy conservation to find the distance the block slides before coming to ...

physics

A 20 kg block slides with an initial speed of 11 m/s up a ramp inclined at an angle of 25o with the horizontal. The coefficient of kinetic friction between the block and the ramp is 0.8. Use energy conservation to find the distance along the incline that the block slides ...

Physics

The drawing shows two frictionless inclines that begin at ground level (h = 0 m) and slope upward at the same angle θ. One track is longer than the other, however. Identical blocks are projected up each track with the same initial speed v0. On the longer track the block ...

Physics

The drawing shows two frictionless inclines that begin at ground level (h = 0 m) and slope upward at the same angle θ. One track is longer than the other, however. Identical blocks are projected up each track with the same initial speed v0. On the longer track the block ...

Physics

The drawing shows two frictionless inclines that begin at ground level (h = 0 m) and slope upward at the same angle θ. One track is longer than the other, however. Identical blocks are projected up each track with the same initial speed v0. On the longer track the block ...

physics

A block of ice at 0°C whose mass initially is m = 48.4 kg slides along a horizontal surface, starting at a speed vo = 4.91 m/s and finally coming to rest after traveling a distance d = 12.28 m. Compute the mass of ice melted as a result of the friction between the block and ...

Physics

A 15 kg box is given an initial push so that it slides across the floor & comes to a stop. If the coefficient of friction is .30, A) Find the Ffr Fg=mg=Fg=15(9.8)=147N Ffr=mu(Fn)- Ffr=.3*147N=44.1N B)Find the acceleration. Hint: what is the net force as the box slides to a ...

phys101

in a calorimeter can(water equivalent=40g)are 200g of water and 50g of ice,all at 0 degreea celcius.into these poured 30g of water at 90degrees celcuis.what will be the final temperature of the system?specific capacity of water is 4186j/kg per degrees celcius,of ice is 2310j/...

physics

The figure below shows an initially stationary block of mass m on a floor. A force of magnitude F = 0.570·mg is then applied at upward angle è = 22°. (a) What is the magnitude of the acceleration of the block across the floor if (a) ìs = 0.600 and ìk = 0.500? (b) What is ...

science

a 25 lb block has an initial speed of vo=10ft/s when it is midway between springs A and B. After striking spring B, it rebounds and slides across the horizontal plane toward spring A, etc. If the coefficient of kinetic friction between the plane and the block is mew k= 0.4, ...

physics

A 2.8 kg gold bar at 99 degrees celcius is dropped into 0.21 kg of water at 23 degrees celcius What is the final temperature? Assume the specific heat of gold is 129 J/kg times degrees celcius. Answer in units of degrees celcius

physics

A 63.8 kg block of silver is at initially at 107 C. 1.0 kg of ice at its freezing point is placed onto the block to cool it. As the ice melts, the water is free to flow off (so that the water never increases in temperature). After all the ice melts, what is the final ...

Physics - Mechanics and Ocsillatory Motion

An 8.70 kg block slides with an initial speed of 1.56 m/s up a ramp inclined at an angle of 28.4 with the horizontal. The coefficient of kinetic friction between the block and the ramp is 0.62. Use energy conservation to find the distance the block slides before coming to rest...

physics 221

Question Part Points Submissions Used An 8.61-kg block slides with an initial speed of 1.72 m/s down a ramp inclined at an angle of 27.4° with the horizontal. The coefficient of kinetic friction between the block and the ramp is 0.73. Use energy conservation to find the ...

Physics

Figure 6-24 shows an initially stationary block of mass m on a floor. A force of magnitude 0.540mg is then applied at upward angle 16 degrees. What is the magnitude of the acceleration of the block across the floor if (a)Us=.6 and Uk=.5 and (b) Us=.4 and Uk=.3?

physics, please help

A 63.8 kg block of silver is at initially at 107 C. 1.0 kg of ice at its freezing point is placed onto the block to cool it. As the ice melts, the water is free to flow off (so that the water never increases in temperature). After all the ice melts, what is the final ...

Chemistry 1 HN

Find the mass of iron heated to 85 degrees celcius that was added to 54.0 grams of water. The temperature of the water changed from 20 degrees celcius to 60 degrees celcius. The specific heat of the iron is 0.045 J/g degrees celcius

chemistry

a block of aluminum is placed in 10.0g of water. the initial temperature of the water is 22.0 degrees celcious and its final temperature is 27.0 degrees celcious. what is the amount of heat released by the block of aluminum in calories if it had an initial temperature of 48.0 ...

Chemistry

How many joules (J) are needed to increase the temperature of 43.0g of aluminum from 25 degrees celcius to 50 degrees celcius? (Cp of Al=0.90J/g degrees of celcius) I also need the formula, data, and answer.

physics

a box of mass 5.7 kg slides across a floor and comes to a complete stop. if its initial speed was 10km/h and mu = 0.34 find the acceleration of the box

Physics

A block of mass m is being dragged across the floor by a force F. The coefficient of friction between the block and floor is u. Show that if the block is being accelerated by the force F from rest for a time t, the speed of the block at time t can be found from: Vf= (F/m - ug)t

PHYSICS

The drawing shows two frictionless inclines that begin at ground level (h = 0 m) and slope upward at the same angle θ. One track is longer than the other, however. Identical blocks are projected up each track with the same initial speed v0. On the longer track the block ...

Mechanics (M1) A level?

A block moves on a rough slope of length 10 m inclined at 30 degrees to the horizontal. The coefficiebt of friction between the block and the slope is 0.4. The block starts from rest at the top of the slope. a) Find the speed at which the block reaches the bottom of the slope...

physics

Suppose that 90 g of hot water at a temperature of 75 degrees C is poured into a cavity in a very large block of ice at 0 degrees C. (a) What will be the final temperature of the water in the cavity? (b) What mass of ice must melt in order for the water to cool down to the ...

physics please help!

Suppose that 90 g of hot water at a temperature of 75 degrees C is poured into a cavity in a very large block of ice at 0 degrees C. (a) What will be the final temperature of the water in the cavity? (b) What mass of ice must melt in order for the water to cool down to the ...

physics

A box slides across a frictionless floor with an initial speed v = 1.8 m/s. It encounters a rough region where? If instead the strip is only 0.413265306122449 m long, with what speed does the box leave the strip? vf =

physics

Years ago, a block of ice with a mass of about 22kg was used daily in a home icebox. The temperature of the ice was 0.0 degrees Celsius when delivered. As it melted, how much heat did a block of ice that size absorb? The latent heat of fusion of water is 3.34 x 10 ^ 5 J/kg. ...

Chemistry

If 150.0 grams of iron at 95.0 degrees Celcius, is placed in an insulated container containing 500.0 grams of water at 25.0 degrees Celcius, and both are allowed to come to the same temperature, what will that temperature be? The specific heat of water is 4.18 J/g degrees ...

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. 21
  22. 22
  23. 23
  24. 24
  25. 25
  26. 26
  27. 27
  28. 28
  29. 29
  30. 30
  31. 31
  32. 32
  33. 33
  34. 34
  35. 35
  36. 36
  37. 37
  38. 38
  39. 39
  40. 40
  41. 41
  42. 42
  43. 43
  44. 44
  45. 45
  46. 46
  47. 47
  48. 48
  49. 49
  50. 50
  51. 51
  52. 52
  53. 53
  54. 54
  55. 55
  56. 56
  57. 57
  58. 58
  59. 59
  60. 60
  61. 61
  62. 62
  63. 63
  64. 64
  65. 65
  66. 66
  67. 67
  68. 68
  69. 69
  70. 70
  71. 71
  72. 72
  73. 73
  74. 74
  75. 75
  76. 76
  77. 77
  78. 78
  79. 79
  80. 80
  81. 81
  82. 82
  83. 83
  84. 84
  85. 85
  86. 86
  87. 87
  88. 88
  89. 89
  90. 90
  91. 91
  92. 92
  93. 93
  94. 94
  95. 95
  96. 96
  97. 97
  98. 98
  99. 99
  100. 100