A 1240 N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1970 N crate hangs from the far end of the beam. (a) Calculate

96,915 results

physics

A 1240 N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1970 N crate hangs from the far end of the beam. (a) Calculate the magnitude of the tension in the wire. (b) Calculate the magnitude of the horizontal and ...

physics

A 1240 N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1970 N crate hangs from the far end of the beam. (a) Calculate the magnitude of the tension in the wire. (b) Calculate the magnitude of the horizontal and ...

physics help

A 1240 N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1970 N crate hangs from the far end of the beamThe angle between the beam and the horizontal is 30 degrees upwards and the angle between the horizontal and the ...

physics

A 1240 N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1970 N crate hangs from the far end of the beamThe angle between the beam and the horizontal is 30 degrees upwards and the angle between the horizontal and the ...

phyics

A 1390-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1960-N crate hangs from the far end of the beam. Using the data shown in the figure, find (a) the magnitude of the tension in the wire and the magnitudes of the (b) ...

Physics! plese help

A 1320-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1960-N crate hangs from the far end of the beam. Using the data shown in the figure, find (a) the magnitude of the tension in the wire and the magnitudes of the (b) ...

Phyics

A 1390-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1960-N crate hangs from the far end of the beam. Using the data shown in the figure, find (a) the magnitude of the tension in the wire and the magnitudes of the (b) ...

Physics

A 1230 N beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1910 N crate hangs from the far end of the beam. What are the magnitude of the horizontal and vertical components of the force that the wall exerts on the left end of the beam?

physics help

A 1210 N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1820 N crate hangs from the far end of the beam. The angle between the beam and the horizontal is 30 degrees upwards and the angle between the horizontal and the...

physics help

A 1210 N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1820 N crate hangs from the far end of the beam. The angle between the beam and the horizontal is 30 degrees upwards and the angle between the horizontal and the...

physics

A 1210 N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1820 N crate hangs from the far end of the beam. The angle between the beam and the horizontal is 30 degrees upwards and the angle between the horizontal and the...

physics help me please

A 1220 N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1990 N crate hangs from the far end of the beamThe angle between the beam and the horizontal is 30 degrees upwards and the angle between the horizontal and the ...

physics

"A 1220-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1960-N crate hangs from the far end of the beam. Find a) the magnitude of the tension in the cable and b) the magnitude of the horizontal and vertical components of...

Physics

"A 1220-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1960-N crate hangs from the far end of the beam. Find a) the magnitude of the tension in the cable and b) the magnitude of the horizontal and vertical components of...

physics

A 1200-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1825-N crate hangs from the far end of the beam. (a) Using the data shown in the drawing, find the magnitude of the tension in the wire. (b) Using the data shown...

physics

A 1245-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1980-N crate hangs from the far end of the beam. (a) Using the data shown in the drawing, find the magnitude of the tension in the wire. N (b) Using the data ...

phys

A 1155-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1915-N crate hangs from the far end of the beam. (a) Using the data shown in the drawing, find the magnitude of the tension in the wire. (b) Using the data shown...

physics

A 1290-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1920-N crate hangs from the far end of the beam. the angle going from the top of the beam o the brick wall is at 50.0 degrees. the angle from the bottom of the ...

physics

A uniform, horizontal beam is 5.00m long and has a weight of 200N. The beam is hinged at one end to a wall. A 600N weight is attached to the order end of the beam. The beam is supported by cable at the end opposite the wall. The cable attaches to the wall directly above the ...

Physics

A 180-kg uniform horizontal beam is attached to a vertical wall at one end and is supported by a vertical cable at the other end making an angle of 30 degree above the x axis. What is the magnitude of the tension in the cable?

Physics

A uniform steel beam of length 5.50 m has a weight of 4.50 103 N. One end of the beam is bolted to a vertical wall. The beam is held in a horizontal position by a cable attached between the other end of the beam and a point on the wall. The cable makes an angle of 25.0° above...

Physics

A uniform steel beam of length 5.50 m has a weight of 4.50 103 N. One end of the beam is bolted to a vertical wall. The beam is held in a horizontal position by a cable attached between the other end of the beam and a point on the wall. The cable makes an angle of 25.0° above...

physics

A uniform 8 m 1500 kg beam is hinged to a wall and supported by a thin cable attached 2 m from the free end of the beam as shown in the figure. The beam is supported at an angle of 30 degrees above the horizontal. a) free diagram b) find the tension in the cable c) how hard ...

Physics

I need a step by step visual of how to do this question: A uniform horizontal beam 5.00m long and weighing 3.00x10^2 N is attached to a wall by a pin connection that allows the beam to rotate. Its far end is supported by a cable that makes an angle of 53 degree with the ...

physics

A uniform horizontal beam 5.00 m long and weighting 2.88 102 N is attached to a wall by a pin connection that allows the beam to rotate. Its far end is supported by a cable that makes an angle of 53.0° with the horizontal (Figure (a)). If a person weighing 5.99 102 N stands 1...

Physics

A uniform beam of weight 245 N, and length L, sticks out from a vertical wall. A lightweight cable connects the end of the beam to the wall, making an angle of 65.0° between the beam and the cable. What is the tension in the cable?

Physics

A uniform beam of length 1.0 m and mass 16 kg is attached to a wall by a cable that makes an angle of 30 degrees with the end of the beam, as shown in the figure. The beam is free to pivot at the point where it attaches to the wall. What is the tension in the cable?

physics

A 189.4 kg uniform, horizontal beam is hinged at one end and at the other is supported by a cable that is at 37 degrees to the vertical. The beam is 3.85 m long. Calculate the magnitude of the force at the hinge.

physics

A uniform rigid pole of length L and mass M is to be supported from a vertical wall in a horizontal position, as shown in the figure. The pole is not attached directly to the wall, so the coefficient of static friction, μs, between the wall and the pole provides the only ...

physics

A uniform rigid pole of length L and mass M is to be supported from a vertical wall in a horizontal position, as shown in the figure. The pole is not attached directly to the wall, so the coefficient of static friction, μs,between the wall and the pole provides the only ...

physics

A uniform rigid pole of length L and mass M is to be supported from a vertical wall in a horizontal position, as shown in the figure. The pole is not attached directly to the wall, so the coefficient of static friction, μs,between the wall and the pole provides the only ...

Physics

A uniform rigid pole of length L and mass M is to be supported from a vertical wall in a horizontal position, as shown in the figure. The pole is not attached directly to the wall, so the coefficient of static friction, μs,between the wall and the pole provides the only ...

Physics

A uniform steel beam of length 5.50 m has a weight of 4.50 103 N. One end of the beam is bolted to a vertical wall. The beam is held in a horizontal position by a cable attached between the other end of the beam and a point on the wall. The cable makes an angle of 25.0° above...

physics

A steel beam (with linear mass density of 6.88 kg/m) has a total length of 10.0m and is suspended by two cables such that the beam hangs horizontally. Cable A is attached 1.00 m from the left end of the beam and cable B is attached 3.00 m from the right end of the beam. A 75.0...

Physics

A 500N person stands 2.5m from a wall against which a horizontal beam is attached. The beam is 6m long and weighs 200N. A cable is attached to the free end of the beam and makes an angle of 45 to the horizontal and is attached to the wall. 1)Determine the magnitude of the ...

Phsyics(Please respond)

A uniform horizontal beam is attached to a vertical wall by a frictionless hinge and supported from below at an angle è = 38o by a brace that is attached to a pin. The beam has a weight of 347 N. Three additional forces keep the beam in equilibrium. The brace applies a force ...

Physics(Please help)

A uniform horizontal beam is attached to a vertical wall by a frictionless hinge and supported from below at an angle è = 38o by a brace that is attached to a pin. The beam has a weight of 347 N. Three additional forces keep the beam in equilibrium. The brace applies a force ...

physics

a uniform beam with a weight of 51.3 N and a length of 3.23 m is hinged at its lower end, and a horizontal force Upper F Overscript right-arrow EndScripts of magnitude 64.0 N acts at its upper end. The beam is held vertical by a cable that makes angle θ = 20.7° with the ...

physics

The drawing shows a uniform horizontal beam attached to a vertical wall by a frictionless hinge and supported from below at an angle θ = 38o by a brace that is attached to a pin. The beam has a weight of 346 N. Three additional forces keep the beam in equilibrium. The ...

physics

A 9.0 m uniform beam is hinged to a vertical wall and held horizontally by a 5.0 m cable attached to the wall 4.0 m above the hinge, as shown below. The metal of the cable has test strength of 1.00 KN (kilo-Newton), which is the maximum tension magnitude T the cable can ...

Physics

A sign is supported by a cable and a horizontal beam.The beam has a length 1.4 m and a uniform mass of12 kg.a) If the cable is attached to the beam at a distance of 1.0 m from the hinge, what is the tension in the cable? (b) If the cable breaks, what is the net torque on the ...

physics

A 24 kg beam is attached to a wall with a hinge and its far end is supported by a cable. The angle between the beam and the cable is 90 degrees and the beam is inclined at an angle of 13.6 degrees with respect to the horizontal. What is the magnitude of the force that the beam...

Physics(Please, please check)

A uniform horizontal beam is attached to a vertical wall by a frictionless hinge and supported from below at an angle è = 38o by a brace that is attached to a pin. The beam has a weight of 347 N. Three additional forces keep the beam in equilibrium. The brace applies a force ...

Physics

A uniform horiztonal beam is attached to a veritcal wall by a frictionless hinge and supported from below at an angle theta = 39 degrees by a brace that is attached to a pin. The bean has a weight of 340 N. Three additional forces keep the beam in equilibrium. The brace ...

Physics

A floodlight with a mass of 20.0 kg is used to illuminate the parking lot in front of a library. The floodlight is supported at the end of a horizontal beam that is hinged to a vertical pole. A cable that makes an angle of 30 degrees with the beam is attached to the pole to ...

Physics

A 600 N uniform rectangular sign 4.00 m wide and 3.00 m high is suspended from a horizontal, 6.00-m-long, uniform, 90-N rod. The left end the rod is supported by a hinge and the right end is supported by a thin cable making a 30.0° angle with the vertical. (a) Find the ...

physics

I would tell you the steps I've taken so far but I have no idea where to even start. Any help is appreciated! Thanks! A uniform 33.5-kg beam of length = 4.15 m is supported by a vertical rope located d = 1.20 m from its left end as in the figure below. The right end of the ...

physics

the figure shows a uniform beam of weight 420 N and length 2.0 m suspended horizontally. On the left it is hinged to a wall, on the right it is supported by a cable bolted to the wall at distance D above the beam. The least tension that will snap the cable is 1100 N. What ...

physics

the figure shows a uniform beam of weight 420 N and length 2.0 m suspended horizontally. On the left it is hinged to a wall, on the right it is supported by a cable bolted to the wall at distance D above the beam. The least tension that will snap the cable is 1100 N. What ...

Physics

A sign weighing 500N is suspended at the end of a uniform 300N beam 5m in length, as shown. The beam is attatched to the wall with a hinge, and its other end is supported by a wire. What is the tension in the wire if it makes an an angle of 30o with the beam? Help please. Use ...

physics

a fis is suspended from a 6m uniform beam supported by a cable and attached by a pivot to the ground. the beam has a mass of 20 kg and the cable can withstand a maximum tension of 10000 N. find masimum wright of a fish that can be supported by this system

Physics

A uniform 34.5-kg beam of length = 4.95 m is supported by a vertical rope located d = 1.20 m from its left end as in the figure below. The right end of the beam is supported by a vertical column. a) Find the tension in the rope. b) Find the force the column exerts on the beam...

math

A uniform ladder of length 2a and mass m lies on a vertical plane with one end against a smooth vertical wall,the other end being supported on a horizontal floor. The ladder is released from rest when inclined at an angle Q to the horizontal. Find the inclination of the ladder...

Physics

A uniform beam weighing Wa=1200 N is 3.50 m long and is suspended horizontally by two vertical wires at its ends, as shown in the figure below. A small but dense weight with WL = 550 N is placed on the beam 2.00m from one end, as shown in the figure. a) are the tensions Ta (in...

physics

One end of a uniform 4.0-m long rod of weight is supported by a cable. the other end rests against the wall, where it is helf by friction. The co-efficient of static friction between the wall and the rod is .50 Determine the minimum distance,x,from point A at which an ...

Physics 101

on a uniform beam of length 5m, hangs a mass 30kg at one end. the beam then balances at a point 1.5m from this end. find the mass of the beam(g=10ms-1)

Physics

A beam of mass mb = 10.0 kg, is suspended from the ceiling by a single rope. It has a mass of m2 = 40.0 kg attached at one end and an unknown mass m1 attached at the other. The beam has a length of L = 3 m, it is in static equilibrium, and it is horizontal, as shown in the ...

math

A uniform horizontal beam weighing 136 kg is 10.4 m long and is supported by columns at each end. A vertical load of 1275 kg is applied to the beam x metres from the right end. Find x so that the reaction at the left column is 540 kg. Round your answer to 2 decimal places

Physics

A uniform beam of weight 520 N and length 3.4 m is suspended horizontally. On the left it is hinged to a wall; on the right is it supported by a cable bolted to the wall at distance D above the beam. The least tension that will snap the cable is 1200 N. What value of D ...

Physics

A uniform beam of weight 520 N and length 3.4 m is suspended horizontally. On the left it is hinged to a wall; on the right is it supported by a cable bolted to the wall at distance D above the beam. The least tension that will snap the cable is 1200 N. What value of D ...

math

Uniform rod AB with end B resting against rough vertical wall. Coefficient of friction between wall and rod is μ. Rod is 2m long and has mass 3kg. Rod is kept in limiting equilibrium by a light inextensible string, one end of which is attached to the end A of the rod and ...

physics

a uniform beam of weight 420 N and length 3.2 m is suspended horizontally. On the left it is hinged to a wall; on the right is it supported by a cable bolted to the wall at distance D above the beam. The least tension that will snap the cable is 1200 N. (a) What value of D ...

Physics

A purple beam is hinged to a wall to hold up a blue sign. The beam has a mass of mb = 6.7 kg and the sign has a mass of ms = 17.4 kg. The length of the beam is L = 2.83 m. The sign is attached at the very end of the beam, but the horizontal wire holding up the beam is attached...

Physics Classical Mechanics

A uniform steel beam of mass m1= 300.0 kg is held up by a steel cable that is connected to the beam a distance L= 5.0 m from the wall, at an angle θ= 40.0∘ as shown in the sketch. The beam is bolted to the wall with an unknown force F⃗ exerted by the wall on ...

Physics

Consider the figure above, where a rigid beam of negligible mass and 10 m long is supported by a cable attached to a spring. When NO block is hung from the beam, the length L (cable-spring) is equal to 5 m. Assume that immediately after block (weight of 280 N) is hung at the ...

Science

In the figure below, a uniform beam of weight 420 N and length 3.2 m is suspended horizontally. On the left it is hinged to a wall; on the right is it supported by a cable bolted to the wall at distance D above the beam. The least tension that will snap the cable is 1200 N. (a...

physics

The figure shows a uniform beam of mass m pivoted at its lower end, with a horizontal spring attached between its top end and a vertical wall. The beam makes an angle è with the horizontal. (a) Find expression for the distance d the spring is stretched from equilibrium. (Use ...

physics

1. A 70 kg uniform 4.0 m long beam is attached to a vertical wall and is supported by a wire. The beam makes an angle of 45 degrees with the horizontal and the wire is horizontal. The horizontal component of the force that the wall exerts on the lower end of the beam is, in ...

Physics

A purple beam is hinged to a wall to hold up a blue sign. The beam has a mass of mb = 6.7 kg and the sign has a mass of ms = 17.4 kg. The length of the beam is L = 2.83 m. The sign is attached at the very end of the beam, but the horizontal wire holding up the beam is attached...

Physics

A circular shop sign of mass 10kg is to be hung from the wall of the shop. The sign hangs from a light, rigid horizontal support of length 0.48m that is hinged to the wall at one end A. The other end B of the support is attached by a model string to a point C at a distance 0....

Physics

A scaffold of mass 50kg and length 5m is supported in a horizontal position by a vertical cable at each end. A window cleaner of mass 70kg stands at a point 2m from one end. Determine the tension in the nearer cable and also the farther cable.

Physics

A beam with a length of 7 m and a mass of 110 kg is attached by a large bolt to a support at a distance of d = 3 m from one end. The beam makes an angle θ = 30° with the horizontal, as shown in the figure. A mass M = 492 kg is attached with a rope to one end of the beam...

Physics

A uniform rod 8m long weighing 5kg is supported horizontally by two vertical parallel strings at P and Q,and at distances of 2m,and 6m from one end. Weights of 1kg,1.5kg and 2kg are attached at distances of 1m,5m and 7m respectively from thesame end. What is tension in each ...

Physics

One end of a uniform 3.20-m-long rod of weight Fg is supported by a cable at an angle of θ = 37° with the rod. The other end rests against the wall, where it is held by friction as shown in the figure below. The coefficient of static friction between the wall and the rod...

physics

A uniform beam weighing 1300N is attached to a vertical wall so that it is perfectly horizontal. the beam is 8 m long. A support race is anchored to the wall beneath the beam, making contact with the beam 3 m away from the wall at an angle of 25 degrees. the maximum force the ...

Physics

A purple beam is hinged to a wall to hold up a blue sign. The beam has a mass of mb = 6.1 kg and the sign has a mass of ms = 16.4 kg. The length of the beam is L = 2.83 m. The sign is attached at the very end of the beam, but the horizontal wire holding up the beam is attached...

Science

MOMENTS A uniform rod 8m long weighing 5kg is supported horizontally by 2 vertical parallel strings @ p & Q and @ distances of 2m and 6m from one end.Weights of 1kg,1.5kg and 2kg are attached at distances of 1m, 5m and 7m respectively from the same end. Find the tension in ...

Physics

A uniform rod 8m long weighing 5kg is supported horizontally by two vertical parallel strings at P and Q,and at distances of 2m,and 6m from one end. Weights of 1kg,1.5kg and 2kg are attached at distances of 1m, 5m and 7m respectively from the same end. Find the tension in each...

Applied physics

two men are carrying a 12m uniform ladder on their shoulders. Man A is 1.0m from one end, and man B is 3.0m from the other end. If the beam has a mass of 200kg, determine the load supported by each man.

Physics

Beam supported by a rope that can rotate about a hinge. The beam is supported by a rope attached 1.00 meter from the end of the beam. The beam has a mass of 10.0 kg and is 6.00 meters long. The rope makes a 60degree angle. What is the tension in the rope? What is the magnitude...

Physics

A solid bar of length L = 1.32 m has a mass m1 = 0.751 kg. The bar is fastened by a pivot at one end to a wall which is at an angle θ = 35.0 ° with respect to the horizontal. (in other words, the angle between the wall and the beam is 35 degrees).The bar is held ...

phy

A scaffold of mass 50 kg and length 7.0 m is supported in a horizontal position by a vertical cable at each end. A window washer of mass 80 kg stands at a point 1.5 m from one end. (a) What is the tension in the cable closer to the painter? N (b) What is the tension in the ...

Physics

A scaffold of mass 60 kg and length 5.0 m is supported in a horizontal position by a vertical cable at each end.A painter of mass 80 kg stands at a point 1.5 m from one end. (a)Find the tension in the cable nearer to the painter. (b)Calculate the tension in the second cable

Physics

A beam that weighs 10.0 N/m is 2.5m long. It is supported at point a point 0.78 m from one end.? Find the weight of the object that must be placed on the other end of the beam to balance it

physics

A 160kg horizontal beam is supported at each end. A 330kg piano rests a quarter of the way from one end. What is the vertical force on each of the supports?

physics

Consider a beam as shown in the figure that is 2 m long and supported by a rope. It is pressed against the wall. There is no friction between the wall and the beam. If the beam has a mass of 2 kg and a sign with a mass of 10 kg is hung off of the end of the beam, can the ...

Physics

A non-uniform beam of length L and weight w makes an angle of è with the horizontal. It is held in position by a frictionless pivot at its upper-right end and by a cable a distance of farther down the beam and perpendicular to it. The center of gravity of the beam is a ...

physics

A uniform ladder AB of length 6m and mass 40kg rests in a vertical plane with his end B on smooth horizontal ground and the end A against a smooth vertical wall. A mass 20kg is hung from a point on the ladder at a distance 2m from B. The ladder is kept in equilibrium by rope ...

Science

A crate of mass 2000 kg is hanging from a crane at the end of a cable 12 m long. If we attach a horizontal rope to this crate and gradually apply a pull of 1800 N, what angle will the cable finally make with the vertical?

geometry

a zip line consists of a pulley attached to a cable that is strung at an angle between two objects. in the zip line at the right one end of the cable is attached to a tree. the other end is attached to a post parallel to the tree. what is the measure of <1 and the the given...

physics

A 30.0-kg child sits on one end of a long uniform beam having a mass of 20.0 kg, and a 43.0-kg child sits on the other end. The beam balances when a fulcrum is placed below the beam a distance of 1.10 m from the 30.0-kg child. How long is the beam?

physics

A 43 kg, 5.3-{\rm m}-long beam is supported, but not attached to, the two posts in the figure . A 23 kg boy starts walking along the beam.How close can he get to the right end of the beam without it falling over?

physics

A weight (with a mass of 71 kg) is suspended from a point near the right-hand end of a uniform boom with a mass of 51 kg . To support the uniform boom a cable runs from this same point to a wall (the left-hand vertical coordinate y=7 x=6) and by a pivot on the same wall at an ...

Physics

A 1.500m long uniform beam of mass 30.00 kg is supported by a wire as shown in the figure. The beam makes an angle of 10.00 degrees with the horizontal and the wire makes and angle of 30.00 degrees with the beam. A 50.00 kg mass, m, is attached to the end of the beam. What is ...

physics

a 3 m long weightless beam is supported at each end by cables. a painter weighing 90 N stands 1 m from the left cable. Calculate the tension in each cable.

Phsyicssss PLease helppp ASAP

A helicopter is lifting two crates simultaneously. One crate with a mass of 151 kg is attached to the helicopter by cable A. The second crate with a mass of 79 kg is hanging below the first crate and attached to the first crate by cable B. As the helicopter accelerates upward ...

Physicsss helppp pleaseee

A helicopter is lifting two crates simultaneously. One crate with a mass of 151 kg is attached to the helicopter by cable A. The second crate with a mass of 79 kg is hanging below the first crate and attached to the first crate by cable B. As the helicopter accelerates upward ...

Physicssss please help

A helicopter is lifting two crates simultaneously. One crate with a mass of 151 kg is attached to the helicopter by cable A. The second crate with a mass of 79 kg is hanging below the first crate and attached to the first crate by cable B. As the helicopter accelerates upward ...

Physics

The figure (Figure 1) shows a model of a crane that may be mounted on a truck.A rigid uniform horizontal bar of mass m1 = 80.0 kg and length L = 5.30 m is supported by two vertical massless strings. String A is attached at a distance d = 1.90 m from the left end of the bar and...

Physics

A beam of mass mb = 10.0 kg, is suspended from the ceiling by a single rope. It has a mass of m2 = 40.0 kg attached at one end and an unknown mass m1 attached at the other. The beam has a length of L = 3 m, it is in static equilibrium, and it is horizontal, as shown in the ...

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. 21
  22. 22
  23. 23
  24. 24
  25. 25
  26. 26
  27. 27
  28. 28
  29. 29
  30. 30
  31. 31
  32. 32
  33. 33
  34. 34
  35. 35
  36. 36
  37. 37
  38. 38
  39. 39
  40. 40
  41. 41
  42. 42
  43. 43
  44. 44
  45. 45
  46. 46
  47. 47
  48. 48
  49. 49
  50. 50
  51. 51
  52. 52
  53. 53
  54. 54
  55. 55
  56. 56
  57. 57
  58. 58
  59. 59
  60. 60
  61. 61
  62. 62
  63. 63
  64. 64
  65. 65
  66. 66
  67. 67
  68. 68
  69. 69
  70. 70
  71. 71
  72. 72
  73. 73
  74. 74
  75. 75
  76. 76
  77. 77
  78. 78
  79. 79
  80. 80
  81. 81
  82. 82
  83. 83
  84. 84
  85. 85
  86. 86
  87. 87
  88. 88
  89. 89
  90. 90
  91. 91
  92. 92
  93. 93
  94. 94
  95. 95
  96. 96
  97. 97
  98. 98
  99. 99
  100. 100