5.70 g of NH4Cl is added to 13.3 g of water. Calculate the molality of the solution.

68,421 results

1. Chemistry

5.70 g of NH4Cl is added to 13.3 g of water. Calculate the molality of the solution.
2. chemistry

8.90 g of NH4Cl is added to 19.7 g of water. Calculate the molality of the solution
3. Chemistry

3.50 g of NH4Cl is added to 18.8 g of water. Calculate the molality of the solution.
4. Chem

4.30 grams of NH4Cl is added to 14.5 grams of water. Calculate the molality of the solution
5. Biology

3grams of ammonium chloride has been added to 20mL of water. The initial temperature of the solutionis 18.0 degrees, and once the ammonium is added to the water, the temperature declines to 11 degrees. Given the following information, calculate the enthalpy of solution per ...
6. Chemistry

An aqueous solution is 8.50% ammonium chloride, NH4Cl, by mass. The density of the solution is 1.024g/mL. Calculate the molality, mole fraction, and molarity of NH4Cl in the solution. I know the formulas needed but I'm not sure where to start. M = moles solute/1 L solution m...
7. Chemistry

If some NH4Cl is added to an aqeous solution of NH3: A. pH of solution will decrease B. PH will not change C. pH will increase D. NH4Cl cannot be added to NH3 E. The solution will not have pH I think the answer is B, because if NH4Cl is added to the solution of NH3, then ...
8. chemistry

10g of nacl were added to 10ml of water. the resulting solution was diluted to be a final volume of 250ml. Given the density of the solution is 0.9864g/ml. Calculate the molality of the solution. Who helps
9. Chemistry

A solution is 0.10M in aqueous NH3. Calculate (a) the number of moles and (b) the number of grams of NH4Cl that must be added to 500mL of this solution to prepare a buffer solution with pH=9.15. You may neglect the volume change due to addition of solid NH4Cl. Kb=1.8x10^-5. (...
10. Chemistry

What is the molality of a glucose solution prepared by dissolving 18.0g of glucose, C6H12O6 in 125g of water? A)0.000794 B)0.144 C)0.699 D)0.794 Molality is the number of moles of solute per kilogram of solvent. Because the density of water at 25°C is about 1 kilogram per ...
11. chemistr

10g of nacl were added to 10ml of water. he resulting solution was diluted to be a final volume of 250ml. Calculate the molarity of the solution. My calculation 10g/58g/mol = 0.173M 0.173M/025L =0.689M Given the density of the solution is 0.9864g/ml. Calculate the molality of ...
12. Chemistry

A buffer solution is prepared by mixing 50.0 mL of 0.300 M NH3 with 50 mL of 0.300 NH4Cl. The pKb of NH3 is 4.74. NH3 + H2O-> NH4+ +OH- 7.50 mL of 0.125 M HCl is added to the 100 mL of the buffer solution. Calculate the concentration of NH3 and NH4Cl for the buffer solution...
13. Chem help!!

A rock salt (NaCl), ice, and water mixutre is used to make homemade ice cream. How many grams of rock salt must be added to lower the freezing point 10.0 degrees C? I have no idea what to do, please help! delta T = Kf*i*m delta T = 10. Kf is the molal freezing point constant, ...
14. chemistry

In a calorimetry experiment, 2.14 g of NH4Cl is dissolved in 100.0 mL of water. The temperature drops by 1.43°C. Calculate the molar heat of solution for NH4Cl.
15. Chemistry

Another Equilibrium Question! The following reaction is at equilibrium in a closed 20.0-L container. At equilibrium, the pressures of NH3 and HCl are both equal to 0.00552 atm, and the mass of NH4Cl (s) is 35.4 g. Calculate the equilibrium pressure of NH3 after 11.3 g of NH4Cl...
16. Chemistry

Calculate mole solute in solution? I added an amount of an unknown sample to a solution. I found that the molality of the solution is 0.085m and there is 0.0156kg of solvent. Calculate the moles of solute present in solution? Thanks!
17. Chemistry

Calculate mole solute in solution? I added 0.2968g of an unknown to a solution. I found that the molality of the solution is 0.085m and there is 0.0156kg of solvent. Calculate the moles of solute present in solution? Thanks!
18. CHEMISTRY- molality

a sucrose solution was prepared by dissolving 13.5g sucrose in enough water to make 100ml of solution. the density is 1.050gml. calculate molality
19. Chemistry

How many grams of dry NH4Cl need to be added to 2.10L of a 0.600M solution of ammonia,NH3 , to prepare a buffer solution that has a pH of 9.00? Kb for ammonia is 1.8x10^-5. I just wanted to make sure I dd this write, can you please check my work? Thank you!!!! I found the pKa ...
20. Chemistry

An aqueous solution contains 2.0 % NaCl by mass. (1) Calculate the molality (NOT molarity!) of the solution. (2) Calculate the mole fraction of the solution. I know how to solve both but the problem is missing one other compound/element. I know that molality is moles per kg of...
21. Chemistry

Calculate the change in PH when 6 ml of 0.1 M HCl is added to 100 ml of a buffer solution that is 0.1 M in NH3 and 0.1 M in NH4Cl. And calculate the change in PH when 6 ml of 0.1 M NaOH is added to the original buffer solution.
22. Chemistry

Calculate the change in PH when 6 ml of 0.1 M HCl is added to 100 ml of a buffer solution that is 0.1 M in NH3 and 0.1 M in NH4Cl. And calculate the change in PH when 6 ml of 0.1 M NaOH is added to the original buffer solution.
23. Physical Chemistry

Calculate the concentrations of each of the following solutions. (a) the molality of chloride ions in an aqueous solution of iron(III) chloride for which xFeCl3 is 0.0195 (b) the molality of hydroxide ions in a solution prepared from 9.16 g of barium hydroxide dissolved in 179...
24. College Chemistry

A 0.05 molal aqueous solution boils at 373.102 K. What is the salt in question? a. AlCl3 b. NaHSO3 c. MgCl2 d. NH4Cl e. NaCl I guessed NH4Cl and got 3 points off. I used the formula delta T=K boiling point X molality
25. chemistry

Hi, Can anyone suggest a protocol for preparing 1 Litre ammonical solution (pH 7.8, NH4-N, 3000 mg/L) from NH4Cl and NaOH? I have worked out that I need 10.7g NH4CL and 0.45 g NaOH -is this correct? I am assuming that 1st step is to prepare 0.45 g NaoH in 0.5 L distilled water...
26. CHemistry....Please double check DrBobb

What mass of ethylene glycol C2H6O2, the main component of antifreeze, must be added to 10.0 L water to produce a solution for use in a car's radiator that freezes at -23C? Assume density for water is exactly 1g/mL. First we find out the freezing point: =(-23.0)-(0.0_ =-23.0 ...
27. chemistry

You dissolved 450.0 g of sugar (C12H22O11) in 150 mL of water. The density of water is 1.00 g/mL a. calculate the molarity of the solution b. calculate the molality of the solution
28. chemistry

A 2.500×10−2M solution of NaCl in water is at 20.0∘C. The sample was created by dissolving a sample of NaCl in water and then bringing the volume up to 1.000 L. It was determined that the volume of water needed to do this was 999.3mL . The density of water at 20.0...
29. chemistry

A 2.500×10−2M solution of NaCl in water is at 20.0∘C. The sample was created by dissolving a sample of NaCl in water and then bringing the volume up to 1.000 L. It was determined that the volume of water needed to do this was 999.3mL . The density of water at 20.0...
30. chemistry

what mass of ammonium chloride is dissolved in 100 grams water in each of the following solutions in 1.10 molal NH4Cl solution, in a solution which is 75% water by mass in solution with a mole fraction of 0.15 NH4Cl? please help me solve this problem. thank you!
31. Chemistry

In lab we did thermochemistry, where we are supposed to find the heats of solution, heat change of calorimeter and molar heat solution of the salt. I calculated that the calorimeter constant for the water we had was 883.194 Joules. We took 1/10 of a mole of NH4Cl and tried to ...
32. Molality

An aqueous solution contains 8.7% NaCl by mass. 1. Calculate the molality of the solution. 2. Calculate the mole fraction of the solution.
33. Chemistry

a solution of 0.2113 g of water dissolv ed in 25g of a solvent freezes at 11.5 degrees celcius below the freezing point of the solvent. what is the Kf for the solvent? A)0.735 B)1.36 c)5.39 D)24.5 Help!!! delta T = Kf*molality Calculate molality = #mols solute/kg solvent, plug...
34. chemistry

calculate the change in pH when 9.00ml of 0.100M HCl(aq) is added to 100.0mL of a buffer solution that is 0.100M in NH3(aq) and 0.100M NH4Cl(aq). ...Calculate the change in pH when 9.00,L if 0.100M NaOH(aq) is added to the original buffer solution.
35. Chemistry

Urea (NH2)2CO is dissolved in 100.0 g of water. The solution freezes at -0.085 degrees C. how many grams of urea were dissolved to make this solution. delta T = Kf*molality Plug in 0.085 for delta T, I assume you know Kf for water, calculate molality. Then molality x kg ...
36. Chemistry

What is the molality of the solution that results when 33.3g of C2H5OH are added to 76.7g of water?
37. Chemistry

I've got a similar question as a previous student. What is a minimum volume (in gallons) of ethylene glycol (CH2OHCH2OH, an antifreeze) that has to be added to 3.00 gal of water if you desire this engine cooling solution (for a auto radiator) NOT to be frozen below - 25.9 oC...
38. chem(freezing point)

please help! I am lost! Question: Find the expected freezing point of a water solution that contains 286g of aluminum nitrate (Al(NO3)3) in 8.5 kg of water. answer in celcius Note the correct spelling of Celsius. delta T = i*Kf*m Determine the molality of 286 g Al(NO3)3 in 8.5...
39. chemistry

this is a really long question. i don't understand how to answer it. help please. A 10.0% aquueous solution of sulfuric acid has a density of 1.0661 g/mL at 20 degrees celsius. A. how many grams of H2SO4 are found in 50.0 g of this solution? B. how many grams of water are ...
40. Chem

Some ethylene glycol, HOCH2CH2OH, is added to your car's cooling system along with 4.4 kg of water. If the freezing point of the water-glycol solution is -15.0°C, how many grams of HOCH2CH2OH must have been added? I used the equation: 15 celcius = 1 x 1.86 celcius/moles per ...
41. Chemistry

1.Calculate the pH of a solution prepared by mixing 20mL of the .07222M aspirin solution with 10mL of .2M NaOH. 2. Calculate the pH for the titration of 40mL of .1M solution of C2H5NH2 with .1M HCl for a)0 mL added and b)20 mL added c)40 mL added d)50mL added. Kb= 6.4x10^-4
42. Chemistry

How many grams of lithium fluoride must be added to 3.5 kg of water to make a solution with a molality of 2.0 molal?

Calculate the new molarity if each of the following dilutions is made. Assume the volumes are additive. (a) 52.3 mL of water is added to 27.1 mL of 0.124 M KOH solution (b) 110. mL of water is added to 54.2 mL of 0.808 M NaCl solution ((please show work, thank u so much)
44. chemistry

Calculate the change in pH when 6.00 mL of 0.100 M HCl(aq) is added to 100.0 mL of a buffer solution that is 0.100 M in NH3(aq) and 0.100 M in NH4Cl(aq). Calculate the change in pH when 6.00 mL of 0.100 M NaOH(aq) is added to the original buffer solution.
45. chemistry

Calculate the change in pH when 9.00 mL of 0.100 M HCl(aq) is added to 100.0 mL of a buffer solution that is 0.100 M in NH3(aq) and 0.100 M in NH4Cl(aq). Calculate the change in pH when 9.00 mL of 0.100 M NaOH(aq) is added to the original buffer solution.
46. chemistry

Calculate the change in pH when 6.00 mL of 0.100 M HCl(aq) is added to 100.0 mL of a buffer solution that is 0.100 M in NH3(aq) and 0.100 M in NH4Cl(aq). Calculate the change in pH when 6.00 mL of 0.100 M NaOH(aq) is added to the original buffer solution.
47. CHEMISTRY

a) Calculate the change in pH when 4.00 mL of 0.100 M HCl(aq) is added to 100.0 mL of a buffer solution that is 0.100 M in NH3(aq) and 0.100 M in NH4Cl(aq). b) Calculate the change in pH when 4.00 mL of 0.100 M NaOH(aq) is added to the original buffer solution.
48. chemistry

What is the molality of a sodium chloride solution if 3.5 grams of the salt is added to 998 g of water Your Answer:
49. Chemistry

how would I find the mass of something from the molality..... How many grams of water should be added to 25.0 g of NaCl to produce a 0.450 m solution?
50. Chemistry

The heat of solution of ammonium chloride is 15.2 kJ/mol. If a 6.187 g sample of NH4Cl is added to 65.0 mL of water in a calorimeter at 26.5°C, what is the minimum temperature reached by the solution? [specific heat of water = 4.18 J/g°C; heat capacity of the calorimeter = ...
51. chemistry

Assuming reaction goes to completion, determine the final concentration of NH4Cl in the calorimeter. heat capacity =3.03J/g.c density =1.012 5g of NH4Cl used 100 mL of water used NH4Cl(s) + H2O(l) --> NH4Cl(aq)
52. chem

Calculate the final concentration of a. 4.0 L of a 4.0 M HNO3 solution is added to water so that the final volume is 8.0L b. Water is added to 0.35L of a 6.0M KOH solution to make 2.0L of a diluted KOH solution. c.A 20.0 mL sample of 8.0% (m/v)NaOH is diluted with water so ...
53. AP Chem

Calculate the pH after 0.010 mol gaseous HCl is added to 250.0 mL of each of the following buffered solutions: a. .050 M NH3/.15 M NH4Cl b. .5 M NH3/ 1.5 M NH4Cl
54. Chemistry

Calculate the pH after 0.010 mol gaseous HCl is added to 250.0 mL of each of the following buffered solutions: a. .050 M NH3/.15 M NH4Cl b. .5 M NH3/ 1.5 M NH4Cl
55. Chemistry AP

Calculate the pH of a 0.44 M aqueous solution of NH4Cl. Kb = 1.8 × 10−5 . I've tried used the Ka=Kw/Kb equation then used the resulting 5.5e-10 in Kw=([H+][Cl-])/[NH4Cl] , using that to get the [H+], but it isn't correct and I don't know what else to do.
56. chemistry

The freezing point of a 0.010 m aqueous solution of a nonvolatile solute is ?0.072°C. What would you expect the normal boiling point of this same solution to be? have no clue, thanks for the thelp Freezing point depression= N*kf* molality you have freezing point depression, ...
57. Chemistry

A saturated solution of NH4Cl was made using 500g of water at 90 degrees. the solution was cooled to 50 degrees. what mass of NH4Cl was crystallized
58. Chemistry

Urea (NH2)2CO is dissolved in 100.0 g of water. The solution freezes at -0.085 degrees C. how many grams of urea were dissolved to make this solution. delta T = Kf*molality Plug in 0.085 for delta T, I assume you know Kf for water, calculate molality. Then molality x kg ...
59. Chemistry

Urea (NH2)2CO is dissolved in 100.0 g of water. The solution freezes at -0.085 degrees C. how many grams of urea were dissolved to make this solution. delta T = Kf*molality Plug in 0.085 for delta T, I assume you know Kf for water, calculate molality. Then molality x kg ...

'A buffer is prepared by mixing a 100.omL of a 0.100 M NH3 solution with a 0.200M solution of NH4CL solution and making the total volume up to 1.000L of water. What is the volume of NH4Cl solution required to achieve a buffer at ph=9.5? Ka of NH4=5.6x10^-10. The textbook says ...
61. chemistry

Calculate the change in pH when 4.00 mL of 0.100 M HCl(aq) is added to 100.0 mL of a buffer solution that is 0.100 M in NH3(aq) and 0.100 M in NH4Cl(aq). Delta pH=? Calculate the change in pH when 4.00 mL of 0.100 M NaOH(aq) is added to the original buffer solution. Delta pH=?
62. AP Chem

Hey guys! Stuck on some pH problems! Thanks so much in advanced: A) Calculate the pH of a 0.200 M solution of potassium acetate, KCH3CO2, in water at 25 °C. At this temperature, Ka = 1.76 × 10-5 for acetic acid. 1. 2.73 2. 5.45 3. 9.02 4. 9.94 5. 10.16 6. none of these Maybe...
63. chemistry/ molarity, molality

A solution is made by mixing 20.0 mL of C6H5CH3, d=.867g/mL, with 140.0mL of C6H6, d=.874g/mL. assuming that the volumes add upon mixing, what is the molarity? what is the molality? i know that molarity= moles/L and molality= moles sol/kg solvent... but im not sure which ...
64. chemistry

Calculate the molality of a 10% H3PO4 solution in water.
65. Chem

1) Which solution will have the lowest OH- A) Na2CO3 B) NaHCO3 C) NaCl D) NaHSO4 E) NH4Cl 2) Which solution will be the strongest base? A) Na2CO3 B) NaHCO3 C) NaCl D) NaHSO4 E) NH4Cl 3) Which aqueous solutions are acidic? A) Na2CO3 and NaHCO3 B) NaCl and NH4Cl C) NaHSO4 and ...
66. chemistry

A solution is prepared by dissolving 20.2 {\rm mL} of methanol ({\rm{CH}}_3 {\rm{OH}}) in 100.0 {\rm mL} of water at 25 ^\circ {\rm C}. The final volume of the solution is 118 {\rm mL}. The densities of methanol and water at this temperature are 0.782 {\rm g/mL} and 1.00 {\rm ...
67. Chemistry

Hi, i'm really desperate! could anyone please help me with this question, I'm stumped. 'A buffer is prepared by mixing a 100.omL of a 0.100 M NH3 solution with a 0.200M solution of NH4CL solution and making the total volume up to 1.000L of water. What is the volume of NH4Cl ...
68. C

A solution contains 19.0 g of NH4Cl in water and is 9.10% NH4Cl. What is the mass of water present?
69. chemistry

Calculate the pH values and draw the titration curve for the titration of 500 mL of 0.010 M acetic acid (pKa 4.76) with 0.010 MKOH. Calculate the pH of the solution after 490 mL of the titrant have been added. Calculate the pH of the solution after 500 mL of the titrant have ...
70. chemistry

Calculate the pH values and draw the titration curve for the titration of 500 mL of 0.010 M acetic acid (pKa 4.76) with 0.010 MKOH. Calculate the pH of the solution after 490 mL of the titrant have been added. Calculate the pH of the solution after 500 mL of the titrant have ...
71. Chemistry

Hello I need help with this excersise: How many moles of NH4Cl are neccesary to add to 1 liter of solution of Co2+ 0,20 M in order to prevent the precipitation when the solution is saturated with H2S (0,1M) and the pH is 7,50. It 's known that pKbNH3=4,75 ; Kps(CoS)=2,0×10^-...
72. Chemistry

I have a test on monday and I NEED to ace it in order to raise my grade > . < ldsfkjaslkf right now, acids and bases are killing me can somebody help me with these problems? A buffer solution is prepared by mixing the weak base ammonia (Kb=1.77x10^-5) with ammonium ...
73. chemistry

A 2.5 g sample of NaOH (Mw = 40.00) was dissolved in water to give a solution of final volume 250 cm3. (i) With reasons, state whether NaOH is a strong or a weak base. Give the conjugate acid of NaOH and decide whether this conjugate acid is acid, alkaline or neutral. (ii) ...
74. chemistry

Finding molarity and molality(best answer)? An aqueous solution is prepared by diluting 3.30 mL acetone,(d= 0.789g/mL) with water to a final volume of 75.0 mL. The density of the solution is 0.993 g/mL. What is the molarity, molality and mole fraction of acetone in this solution?
75. Chemistry: molality and freezing point?

What mass of ethylene glycol C2H6O2, the main component of antifreeze, must be added to 10.0 L water to produce a solution for use in a car's radiator that freezes at -23.3C? Assume the density for water is exactly 1g/mL. m = moles solute / kg solvent Help please?
76. Chemistry

Which of the following would involve the largest production of heat per mole? a)the burning of gasoline b)the evaporation of water c)the fission of uranium d)the freezing of water e)the rusting of iron Is it C) Which of the following would involve the greatest absorption of ...
77. CHEMISTRY MOLALITY!!!!!

A bottle of wine contains 13.1% ethanol by volume. The density of ethanol (C2H5OH) is 0.789 g/cm3. Calculate the concentration of ethanol in wine in terms of mass percent and molality. i don't know how to get molality. please help!!!! Molality is the number of moles of solute ...
78. thermodynamics?

calculate the number of grams of glycerol, C3H5(OH)3 (MW=92.1 g/mol), that must be dissolved in 520 grams of water to raise the boiling point to 102.00 degrees Celsius. this whole chapter really lost me. delta T = Kb*molality delta T = 2 degrees. Kb = boiling point elevation ...
79. Chemistry

A 100 milliliter sample of 0.100-molar NH4Cl solution was added to 80 milliliters of a 0.200-molar solution of NH3. The value of Kb for ammonia is 1.79 x 10^-5. (a) What is the value of pKb for ammonia? (b) What is the pH of the solution described in the question? (c) If 0.200...
80. Chemistry

A 100 milliliter sample of 0.100-molar NH4Cl solution was added to 80 milliliters of a 0.200-molar solution of NH3. The value of Kb for ammonia is 1.79 x 10^-5. (a) What is the value of pKb for ammonia? (b) What is the pH of the solution described in the question? (c) If 0.200...
81. Molarity/molality

A 3.29 m solution of the solute H2O dissolved in the solvent acetone is available. Calculate the mass ( kg ) of the solution that must be taken to obtain 26.70 mol of H2O. m= molality I have no idea how to approach this problem, I'm not interesting in getting the answer, I ...
82. science

a solution is made by dissolving 25 g NaCl in enough water to make 1.0 L solution. Assume that density of the solution is 1.0 g/mL. calculate the mass percent, molarity, molality, and mole fraction of NaCl.
83. science

a solution is made by dissolving 25 g NaCl in enough water to make 1.0 L solution. Assume that density of the solution is 1.0 g/mL. calculate the mass percent, molarity, molality, and mole fraction of NaCl.
84. chemistry

If a student added 42.6 grams of sodium sulfite to 780.4 grams of water and determined that 3.40 grams of the new solution occupied 3.20ml, what is the weight percent, molality, and molarity of the solution produced?
85. college chemistry

a solution is made by dissolving 25 g NaCl in enough water to make 1.0 L solution. Assume that density of the solution is 1.0 g/mL. calculate the mass percent, molarity, molality, and mole fraction of NaCl.
86. Chemisty

Consider a 1.50 L aqueous solution of 3.75 M NH3, where 17.5 g of NH4Cl are dissolved. To this solution, 5.00 g of MgCl2 are added. a. What is [OH-] before MgCl2 is added? b. Will a precipitate form? c. What is [Mg2+] after equilibrium is established? I don't need the answers...
87. Chemistry

A dilute electrolyte solution is prepared by dissoving iron (III) chloride in water. It is found to have a freezing point of -2.10 degrees C. Calculate the molality of the solution.
88. Chemistry Class

What is the molality of a solution made by adding 0.145 g of sodium acetate to 119 ml water? How do I find molality?
89. "Given Molality, calculate..."

"Given: An aqueous solution of C6H12O6 with a density of 1.18 g/ml" I) Calculate Molarity 1) It firsts asks me to, "State the moles of solute" 2) Calculate the mass of the solute in grams - I think I can do this if I know how to get #1 3) Later it also asks, "State the ...
90. Chemistry

A solution is made by dissolving 55g of KCl in enough water to make 1.00 L of solution. Assume that the density of the solution is 1.00 g/mol. Calculate the mass percent, molarity, molality, and mole fraction of KCl.
91. Chemistry

A 5.00-gram sample of glucose, C6H12O6, [molar mass = 180.] is dissolved 10.0 grams of water What is the molality of the glucose solution? Calculate the boiling(BP) and freezing points(FP) of this solution to the nearest 0.1 C°. The vapor pressure of pure water at 30ºC is 25...
92. Chemistry

30cm of 0.3molar solution (0.3mol) were diluted to 0.1molar solution(0.1mol) by addition of water calculate A. The new molar solution B. Volume of water added
93. chemistry

I have two that I can not figure out: #1: calculate the MOLALITY of 10.00 g/L of the salt, if its molar mass is 100.0 g/mol and solution density D=1.100 g/mL work: 10.00 g NaCl x (1mL/1.100g) x (1kg/1000 mL)= 0.00909 kg 100.0 g x (1 mol NaCl/58.4 g Nacl)= 1.7 mol 1.7/0.0090= ...
94. Chmistry

Sodium metal dissolves in liquid mercury to form a solution called a sodium amalgam. The densities of Na(s) and Hg(l) are 0.97 g/cm3 and 13.6 g/cm3, respectively. A sodium amalgam is made by dissolving 1.0 cm3 Na(s) in 20.0 cm3 Hg(l). Assume that the final volume of the ...
95. Chemistry

Sodium metal dissolves in liquid mercury to form a solution called a sodium amalgam. The densities of Na(s) and Hg(l) are 0.97 g/cm3 and 13.6 g/cm3, respectively. A sodium amalgam is made by dissolving 1.0 cm3 Na(s) in 20.0 cm3 Hg(l). Assume that the final volume of the ...
96. CHEM

calculate the molality of a solution formed by dissolving 27.8g of LiI in 500mL of water
97. chemistry

Calculate the molality of sulphuric acid solution in which mole fraction of water is .85
98. chem

calculate the molality of a solution of 2.34g acetic acid, HC2H3O2, in 35.0 g water
99. Chemistry

Calculate the molality of a solution prepared by dissolving 31.6 g of Fe2O3 in 750. g of water
100. Chemistry

Which of the following combinations will make a good buffer solution? 0.05 M H2CO3 + 0.05 M KHCO3 0.5 M HI + 0.5 M CsI 0.3 M NH4Cl 0.3 M NH4Cl + 0.1 M NH3 0.3 M NH4Cl + 0.1 M HCl thanks