
3. A gas is confined in a 0.47mdiameter cylinder by a piston, on which rests a weight. The mass of the piston and weight together is 150 kg. The atmospheric pressure is 101 kPa. (a)What is the pressure of the gas in kPa? (b) If the gas in the cylinder is heated, it expands, ...

A gas is confined in a 0.47mdiameter cylinder by a piston, on which rests a weight. The mass of the piston and weight together is 150 kg. The atmospheric pressure is 101 kPa. (a)What is the force (in Nt) exerted on the gas by the piston, the weight and the atmosphere ...

A gas sample is confined to a chamber with a movable piston. A small load is placed on the piston and the system is allowed to reach equilibrium, shown above. If the weight of the piston and the load is F=70.0 N and the piston has an area of A=9.00x104 m2, what is the ...

A pistoncylinder assembly with the piston resting on a set of stops, contains 0.5 Kg of He gas intially at 100kPa and 25C. The mass of the piston and the effect of the atmospheric pressure is such that a pressure of 500kPa is required to raise it. How much energy must be ...

Suppose a monatomic ideal gas is contained within a vertical cylinder that is fitted with a movable piston. The piston is frictionless and has a negligible mass. The area of the piston is 3.06 102 m2, and the pressure outside the cylinder is 1.02 105 Pa. Heat (2109 J) is ...


Suppose a monatomic ideal gas is contained within a vertical cylinder that is fitted with a movable piston. The piston is frictionless and has a negligible mass. The area of the piston is 3.06 102 m2, and the pressure outside the cylinder is 1.02 105 Pa. Heat (2109 J) is ...

Imagine a 600 g of water at 70oC in a pistoncylinder device. Initially, the 9kg, 13cm diameter piston rests on two stops such that the water occupies a volume of 0.2 m3. Heat is transferred to the system until the water is completely vaporized. Take the atmospheric pressure...

A 400N weight is sitting on a piston. The diameter of the piston is 8 cm. How much pressure does the weight exert on the piston?

A cylinder is fitted with a piston, beneath which is a spring, as in the drawing. The cylinder is open at the top. Friction is absent. The spring constant of the spring is 4000 N/m. The piston has a negligible mass and a radius of 0.022 m. (a) When air beneath the piston is ...

I need help with part b here's all information. (a) Chlorine gas is added to a glass cylinder of 2.5 cm in radius, fitted with a movable piston. Gas is added until the piston is lifted 5 cm off the bottom of the glass. The pressure on the gas is 1 atm, and the gas and cylinder...

Consider a cylinder containing 2 mol of an ideal gas at an initial temperature of 25 C. The cylinder is fitted with a piston on which a weight is placed, subjecting the gas to a constant pressure of 2.66 atm. The cylidner is then wrapped with a heater, from which 1.50 kJ of ...

A cylinder is fitted with a piston, beneath which is a spring, as in the drawing. The cylinder is open at the top. Friction is absent. The spring constant of the spring is 4100 N/m. The piston has a negligible mass and a radius of 0.023 m. (a) When air beneath the piston is ...

Read the activity 21:Force and Pressure in the lab manual (pages 167168). As described in the manual, consider a 10 cc syringe is connected to a 50 cc syringe. Information of the syringes are as follows: (mass of 10 cc piston) = 16 g (mass of 50 cc piston) = 60.6 g (diameter...

A pistoncylinder device contains 100 g of ethylene gas initially at 27oC, 115 kPa. Ethylene is heated and the piston starts to rise until the volume reaches 90 L and merely touches a linear spring that has a spring constant of 60 kN/m. More heat is added until the piston ...

A cylinder is fitted with a piston, beneath which is a spring, as in the drawing. The cylinder is open to the air at the top. Friction is absent. The spring constant of the spring is 4100 N/m. The piston has a negligible mass and a radius of 0.010 m. (a) When the air beneath ...


Read the activity 21:Force and Pressure in the lab manual (pages 167168). As described in the manual, consider a 10 cc syringe is connected to a 50 cc syringe. Information of the syringes are as follows: (mass of 10 cc piston) = 16 g (mass of 50 cc piston) = 60.6 g (diameter...

Read the activity 21:Force and Pressure in the lab manual (pages 167168). As described in the manual, consider a 10 cc syringe is connected to a 50 cc syringe. Information of the syringes are as follows: (mass of 10 cc piston) = 16 g (mass of 50 cc piston) = 60.6 g (diameter...

A piston has a diemaeter of .64 cm. A second piston has a diameter of 3.8 cm. determine the Force necessary on Piston A to support the 500.0 Newton weight on piston B (in the absence of friction.)

Suppose a monatomic ideal gas is contained within a vertical cylinder that is fitted with a movable piston. The piston is frictionless and has a negligible mass. The area of the piston is 3.06 102 m2, and the pressure outside the cylinder is 1.02 105 Pa. Heat (2109 J) is ...

A cylinder contains one liter of air at room temperature (300 K) and atmospheric pressure (10^5 N/m^2). At one end of the cylinder is a massless piston, whose surface area is 0.01 m^2. Suppose that you push the piston in very suddenly, exerting a force of 2000 N. The piston ...

Suppose a monatomic ideal gas is contained within a vertical cylinder that is fitted with a movable piston. The piston is frictionless and has a negligible mass. The area of the piston is 3.06 102 m2, and the pressure outside the cylinder is 1.02 105 Pa. Heat (2109 J) is ...

A cylinder with a movable piston has the square meter 24cm2. How far will the piston go down if 5.0 kg weight is laid on the piston and the temperature remains the same? P: 1.0 atm. Help please :)

An elevator operates on a very slow hydraulic jack. Oil is pumped into a cylinder that contains the piston. The piston lifts the elevator as the internal cylinder pressure (P2) rises in comparison to the outside pressure (P1=101,325 Pa or about 14.7 psi). If the piston can ...

An elevator operates on a very slow hydraulic jack. Oil is pumped into a cylinder that contains the piston. The piston lifts the elevator as the internal cylinder pressure (P2) rises in comparison to the outside pressure (P1=101,325 Pa or about 14.7 psi). If the piston can ...

A vertical cylindrical tank contains 1.80 mol of an ideal gas under a pressure of 1.00 atm at 20.0oC. The round part of the tank has a radius of 10.0 cm, and the gas is supporting a piston that can move up and down in the cylinder without friction. (a) What is the mass of this...


4) A 10 cm cylinder chamber has a 5cm diameter piston attached to one end. The piston is connected to an ideal spring with a spring constant of 10N/cm. Initially the spring is not compressed but is latched in place so that it cannot move. The cylinder is filled with a gas to a...

A 34.05 gram liquid sample of an unstable compound is deposited in a metal piston assembly that has a cylinder with a diameter of 20.0 cm. After the sample is added, the piston is placed in contact with the liquid and the piston vent is closed. This process removes all ...

A vertical cylindrical cylinder, closed at the bottom end, contains 0.0100 moles of gas. It is fitted at the top with a piston, which can move freely. The mass of the piston is 14.0 kg and the initial height of the piston above the bottom of the cylinder is 25 cm. What is the ...

A hydraulic lift in the shape of the letter U, two pistons are formed, one with a larger diameter and other with a smaller. If the diameter of the smaller piston is 4.0 cm and the diameter of the larger piston is 40.0 cm, what weight can the larger piston support when a force ...

In a hydraulic lift, if the radius of the smaller piston is 2 cm and the radius of the larger piston is 20 cm, what weight can the larger piston support when a force of 250 N is applied to the smaller piston? d = diameter of smaller piston D = diameter of larger piston I just ...

A hydraulic jack has an input piston with a diameter of 1.00 cm, and an output piston with a diameter of 6.00 cm. What weight (in N) can be lifted when a force of 45.8 N is applied to the input piston? Answer is 1650 N but I need someone walk me through the steps please.

Piston 1 has a diameter of 0.524cm Piston 2 has a diameter of 5.64 cm. In the absence of friction, determine the force required on piston 1 necessary to support an object, m, with weight 1072 N. (Neglect the height difference between the bottom of the two pistons, and assume ...

If you have a hydraulic lift and you know the density of the oil inside, the area of the cylinder and the area of the piston and the force that needs to be applied to lift as certain weight and the weight of that object...how do you find the height that the piston needs to be ...

2 moles of ideal gas are in a cylinder container with crosssectional area 1*10^2 m^3. Cylinder is fitted with a light, movable piston that is open to atmosphere, where pressure is 10^5 PA.A 50KG MASS PLACED ON PISTON KEEPS IT IN mechanical equilibrium when temperature is ...

A 1/2 inch diameter piston moves 10 inches when 30 Lbs of force is applied how far will it move a 6 inch diamter piston and how much weight will this piston lift.


A1/2 inch diameter piston moves 10 inches when 30 Lbs of force is applied, how far will it move a 6 inch Diamter piston, and how much weight will this piston lift?

A sample consisting of 22.7 g of a nongaseous, unstable compound X is placed inside a metal cylinder with a radius of 8.00 cm, and a piston is carefully placed on the surface of the compound so that, for all practicla purposes, the distance between the bottom of the cylinder ...

A quantity of gas in a piston cylinder has a volume of 0.544 m3 and a pressure of 200 Pa. The piston compresses the gas to 0.126 m3 in an isothermal (constanttemperature) process. What is the final pressure of the gas? ??__Pa

A sample consisting of 22.7 g of a nongaseous, unstable compound X is placed inside a metal cylinder with a radius of 8.00 cm, and a piston is carefully placed on the surface of eth compound so that for all practical purposes, the distance between the bottom of the cylinder ...

if the big piston is 10 times of the sizes of the smaller piston to balance a 500Nload at the big piston (assume that the piston level are the same and the weight of the big piston can be ignored

Consider 2 kg of an ideal gas (R=300 J/(kg.K) and Cp=1000 J/(kgK)) contained in a piston cylinder arrangement. The cylinder has a small valve at the end opposite to the piston.The cylinder walls are not adiabatic and allow heat transfer. The initial pressure and volumeare 0.1 ...

Energy is added to a pistoncylinder arrangement. The piston is withdrawn in such a way that the temperature remains constant. The initial pressure and volume are 200 KPa and 2m^3, respectively. If the final pressure is 100 KPa, determine the work done by the ideal gas on the ...

A piston, A, as shown below, has a diameter of 0.54 cm. A second piston, B has a diameter of 3.8 cm. Determine the force, F, necessary to support the 500.0 N weight in the absence of friction.

A piston, A, has a diameter of .87 cm. A second piston, B, has a diameter of 5.6 cm. Determine the Force "F" necessary to support the 850 N weight in the absence of friction.

Consider the figure below where a cylinder of an ideal gas is closed by an 16 kg movable piston of area = 60 cm2. When the gas is heated from 30 0C to 100 0C the piston rises by 20 cm. The piston is then fastened in place and the gas is cooled back to its original temperature ...


In a hydraulic piston set up, one circular piston has a diameter of 2 cm,while the other piston has a diameter of 6cm. Calculate the ratio of the force exerted by the larger piston to the force applied to the smaller piston?

In a hydraulic piston, the small piston has a diameter of 2cm and the large piston has a diameter of 6m. How much more force can the larger piston exert compared with the force applied to the smaller piston?

A cylinder is fitted with a piston that is connected to the bottom by a spring. The spring has a spring constant of k = 3600 N/m. The cylinder is open to air at the top and is frictionless. The radius of the cylinder is 25 mm and the piston has negligible mass. The air beneath...

A movable piston having a mass of 8.00 kg and a crosssectional area of 5.00 cm2 traps 0.200 moles of an ideal gas in a vertical cylinder. If the piston slides without friction in the cylinder, how much work is done on the gas when its temperature is increased from 18°C to ...

A movable piston having a mass of 8.00 kg and a crosssectional area of 5.00 cm2 traps 0.200 moles of an ideal gas in a vertical cylinder. If the piston slides without friction in the cylinder, how much work is done on the gas when its temperature is increased from 18°C to ...

The drawing shows an ideal gas confined to a cylinder by a massless piston that is attached to an ideal spring. Outside the cylinder is a vacuum. The crosssectional area of the piston is A = 2.50 103 m2. The initial pressure, volume, and temperature of the gas are, ...

The drawing shows an ideal gas confined to a cylinder by a massless piston that is attached to an ideal spring. Outside the cylinder is a vacuum. The crosssectional area of the piston is A = 2.50 103 m2. The initial pressure, volume, and temperature of the gas are, ...

The drawing shows an ideal gas confined to a cylinder by a massless piston that is attached to an ideal spring. Outside the cylinder is a vacuum. The crosssectional area of the piston is A = 2.50 × 103 m2. The initial pressure, volume, and temperature of the gas are, ...

The drawing shows an ideal gas confined to a cylinder by a massless piston that is attached to an ideal spring. Outside the cylinder is a vacuum. The crosssectional area of the piston is A = 2.50 × 103 m2. The initial pressure, volume, and temperature of the gas are, ...

The drawing shows an ideal gas confined to a cylinder by a massless piston that is attached to an ideal spring. Outside the cylinder is a vacuum. The crosssectional area of the piston is A = 2.50 × 103 m2. The initial pressure, volume, and temperature of the gas are, ...


Piston 1 has a diameter of 0.643 cm. Piston 2 has a diameter of 4.59 cm. In the absence of friction, determine the force required on piston 1 necessary to support an object, m, with weight 1151 N. (Neglect the height difference between the bottom of the two pistons, and assume...

A movable piston having a mass of 7.26 kg and a crosssectional area of 5.26 cm2 traps 0.250 moles of an ideal gas in a vertical cylinder. If the piston slides without friction in the cylinder, how much work will the gas do when its temperature is increased from 20.5oC to 286oC?

A) a picture shows a container that is sealed at the top by a movable piston. Inside the container is a ideal gas at 1.00atm , 20.0 *C, and 1.00L. (The pic is of a 2L container which has a piston pushed downward to the 1L level. Under the piston, under the 1L mark, is a sample...

A cylinder that has a 40.0 cm radius and is 50.0 cm deep is filled with air at 20.0°C and 1.00 atm. A 21.0 kg piston is now lowered into the cylinder, compressing the air trapped inside. Finally, a 79.0 kg man stands on the piston, further compressing the air, which remains ...

When gasoline is burned in the cylinder of an engine, it creates a high pressure that pushes on the piston. If the pressure is 150 poundforce per square inch, and it moves the 3inch diameter piston a distance of 6 centimeters in 0.1 seconds...

A car's brake system transfers pressure from the main cylinder to the brake shoes on all four wheels. The surface area of the main cylinder piston is 7.2 sq cm, and that of the piston in each individual brake cylinder is 1.80 sq cm. The driver exerts a 5.00 N force on the ...

in the hydraulic machine shown, you observe that when the small piston is pulled down 10cm, yhe large piston is raised 1 cm. if the small piston is pushed down with a force of 100n, what is the most weight that the large piston can support?

Water in a piston/cylinder is at 100degC, x=0.5 with mass 1kg and the piston rests on two stops. The equilibrium pressure that will float the piston is 300 kPa. The water is heated to 300degC by an electrical heater. a) At what temperature would all the liquid be gone? I ...

Piston Circle 1 in the figure below has a diameter of 0.29 in.; Piston Circle 2 has a diameter of 1.7 in. In the absence of friction, determine the force vector F necessary to support the 500lb weight.

Piston circled 1 in the figure below has a diameter of 0.28 in.; Piston circled 2 has a diameter of 1.6 in. In the absence of friction, determine the force vector F necessary to support the 500lb weight. in lb i got 1.53 lb but it is incorrect


A cylinder of gas is compressed by a piston from an initial volume of 125litres to a final volume of 90 litres.The compression occurs at constant pressure,and the work done on the gas by the piston is 10^4J.What is the gas pressure during the compression?

An ideal gas is enclosed in a cylinder with a movable piston on top of it. The piston has a mass of 8,000 g and an area of 5.00 cm2 and is free to slide up and down, keeping the pressure of the gas constant. (a) How much work is done on the gas as the temperature of 0.230 mol ...

An ideal gas is enclosed in a cylinder with a movable piston on top of it. The piston has a mass of 8,000 g and an area of 5.00 cm2 and is free to slide up and down, keeping the pressure of the gas constant. (a) How much work is done on the gas as the temperature of 0.230 mol ...

An ideal gas is enclosed in a cylinder with a movable piston on top of it. The piston has a mass of 8,000 g and an area of 5.00 cm2 and is free to slide up and down, keeping the pressure of the gas constant. (a) How much work is done on the gas as the temperature of 0.230 mol ...

Air at 1 atm is inside a cylinder 17.9 cm in radius and 17.9 cm in length that sits on a table. The top of the cylinder is sealed with a movable piston. A 24.1kg block is dropped onto the piston. a) From what height above the piston must the block be dropped to compress the ...

A hydraulic press has an input cylinder 1 m in diameter and an output cylinder 2 meters in diameter. Assuming 100% efficiency, find the force exerted by the output piston when a force of 10 Newtons is applied to the input piston. pounds If the input piston is moved through 5 ...

a hydraulic press contains oil of density=800kg/meter cube,and the areas of the large cylinder=0.5meter squad and area of small cylinder=0.0001meter squad.the mass of the large piston is 51kg,while the small piston has unknown mass m.If an additonal mass of 510kg is placed on ...

The small piston has a diameter of 2cm and the large piston has a diameter of 6cm. How much more force can the larger piston exert compared with the force applied to the smaller piston?

A cylinder which is in a horizontal position contains an unknown noble gas at 4.63 × 104 Pa and is sealed with a massless piston. The piston is slowly, isobarically moved inward 0.202 m, while 1.95 × 104 J of heat is removed from the gas. If the piston has a radius of 0.283 ...

3. A cylinder and an airtight piston are used in the following experiment. The piston is pushed up and down in the cylinder and the resulting pressure of the air inside the cylinder is measured with a pressure gauge. The results of the experiment are recorded in the following ...


A cylinder with a valve at the bottom is filled with an ideal gas. The valve is now opened and some of the gas escapes slowly. The valve is then closed, after which the piston is observed to be at a lower position. Assume that the system is in thermal equilibrium with the ...

consider a vertical piston system. the piston has a 50g mass and a given radius of 3mm. what amount of pressure does the piston exert? ( use g==9.8 m/s^2 )

A sample of gas confined in a cylinder with a movable piston is kept at constant pressure. The volume of the gas doubles when the temperature of the gas is changed from a. 200. K to 400. K b. 200. C to 400. C How do you know if it's kelvin or celsius? k= c + 273, by the way.

A 10m height cylinder with cross sectional area of 0.1 m2 has a massless piston at the bottom as shown in Figure Q2. Water is at the top of the piston with air at 20oC over it. Under the piston there is air at 300K. The volume of the air is 0.3m3. Heat is now transferred to ...

A 10m height cylinder with cross sectional area of 0.1 m2 has a massless piston at the bottom as shown in Figure Q2. Water is at the top of the piston with air at 20oC over it. Under the piston there is air at 300K. The volume of the air is 0.3m3. Heat is now transferred to ...

A cylinder of gas is compressed by a piston from an intial volume of 125 litres to a final volume of 90 litres.The compression occurs at constant pressure and work done on the gas by the piston is 10^4J.What is the gas pressure during compression

Given: Compressor speed is 1500rpm. The compressor has a bore of 3.125 in, a stroke of 3.26in and a connecting rod crank ratio to 3.5. Inlet pressure is atmospheric 14.7 psia, peak cylinder pressure is 132psia, and mean active pressure mep is 26psia. Flow is 8.9 cfm at mep, ...

The head of a round piston has a pressure of 210 psi pushing down on it. The piston is 3 inches in diameter. What is the force pushing the piston down?

A sample consisting of 22.7 g of a nongaseous, unstable compound X is placed inside a metal cylinder with a radius of 8.0 cm, and a piston is carefully placed on the surface of the compound so that, for all practical purposes, the distance between the bottom of the cylinder ...

A sample consisting of 22.7 g of a nongaseous, unstable compound X is placed inside a metal cylinder with a radius of 8.0 cm, and a piston is carefully placed on the surface of the compound so that, for all practical purposes, the distance between the bottom of the cylinder ...


A sample consisting of 22.7 g of a nongaseous, unstable compound X is placed inside a metal cylinder with a radius of 8.00 cm, and a piston is carefully placed on the surface of the compound so that, for all practicla purposes, the distance between the bottom of the cylinder ...

I have the following marathon problem but am unsure where to start: A Sample consisting of 22.7g of nongaseous, unstable compound X is placed inside a metal cylinder with a radius of 8.00cm, and a piston is carefully placed on the surface of the compound so that, for all ...

I have the following marathon problem but am unsure where to start: A Sample consisting of 22.7g of nongaseous, unstable compound X is placed inside a metal cylinder with a radius of 8.00cm, and a piston is carefully placed on the surface of the compound so that, for all ...

a 10.0 cm cylindrical chamber has a 5.0cm diameter piston attached to one end. The piston is connected to an ideal spring with a spring constant of 10.0N/cm. Initially, the spring is not compressed but is latched in place so that it cannot move. When the cylinder is filled ...

A gas is confined to a container with a massless piston at the top. (Part C figure) A massless wire is attached to the piston. When an external pressure of 2.00 atm is applied to the wire, the gas compresses from 4.90 to 2.45 L. When the external pressure is increased to 2....

A certain amount of chlorine gas was placed inside a cylinder with a movable piston at one end. The initial volume was 3.00 and the initial pressure of chlorine was 1.75 . The piston was pushed down to change the volume to 1.00 . Calculate the final pressure of the gas if the ...

Suppose a monatomic ideal gas is contained within a vertical cylinder that is fitted with a movable piston. The piston is frictionless and has a negligible mass. The area of the piston is 3.06 102 m2, and the pressure outside the cylinder is 1.02 105 Pa. Heat (2109 J) is ...

A certain amount of chlorine gas was placed inside a cylinder with a movable piston at one end. The initial volume was 3.00 and the initial pressure of chlorine was 1.65 . The piston was pushed down to change the volume to 1.00 . Calculate the final pressure of the gas if the ...

The motion of a piston in an auto engine is simple harmonic. The piston travels back and forth over a distance of 23 cm, and the piston has a mass of 1.7 kg. 2515 rpm 23 cm max speed of the piston 30.28757 m/s What is the maximum force acting on the piston when the engine is ...

A car of mass 1420 kg rests on a hydraulic lift with a piston of radius 0.26 m that is connected to a second piston of radius 0.032 m. If the car is just barely lifted off the ground, what is the force at the second piston?


Air trapped in a cylinder fitted with a piston occupies 162.2 mL at 1.08 atm pressure. What is the new volume when the piston is depressed, increasing the pressure by 25%?

Air trapped in a cylinder fitted with a piston occupies 163.1 mL at 1.08 atm pressure. What is the new volume when the piston is depressed, increasing the pressure by 25%?

A certain amount of chlorine gas was placed inside a cylinder with a movable piston at one end. The initial volume was 3.00 L and the initial pressure of chlorine was 1.30atm . The piston was pushed down to change the volume to 1.00 L. Calculate the final pressure of the gas ...

A mixture of gasoline vapor and air is placed in an engine cylinder. The piston has an area of 7.4*10^3 m^2 and is displaced inward by 7.2*10^2 m. If 9.5*10^5 Pa of pressure is placed on the piston, how much work is done during this process? Is work being done on or by the ...

a 15000N car on a hydrolyic lift rests on a cylinder with a piston of radius 0.20M,. if a connecting cylinder with a piston of 0.04M radius is driven by compressed air, what force must be applied to the smaller piston in order to lift the car? am i doing this right? (0.04M / 0...
 Pages:
 1
 2
 3
 4
 5
 6
 7
 8
 9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
 100