25 cm of 1.0 mol dm− NaOH is added to 25 cm of 1.0 mol dm− HCl. The temperature rise is 6¢XC. Which reactants will also give a temperature rise of 6¢XC?

60,471 results

Science

25 cm of 1.0 mol dm− NaOH is added to 25 cm of 1.0 mol dm− HCl. The temperature rise is 6¢XC. Which reactants will also give a temperature rise of 6¢XC? A. 25 cm of 2.0 mol dm− NaOH and 25 cm of 2.0 mol dm− HCl. B. 50 cm of 1.0 mol dm− NaOH and ...

CHEM

Which of the following mixtures will result in the formation of a buffer solution when dissolved in 1.00 L of water? i) 0.50 mol NaOH and 0.50 mol HCl. ii) 0.50 mol NaCl and 0.25 mol HCl. iii) 0.50 mol NaF and 0.25 mol HF. iv) 0.50 mol NaOH and 0.25 mol HF. v) 0.25 mol NaOH ...

chemistry

Which of the following mixtures will be a buffer when dissolved in a liter of water? a. 0.1 mol Ca(OH)2 and 0.3 mol HI b. 0.3 mol NaCl and 0.3 mol HCl c. 0.4 mol NH3 and 0.4 mol HCl d. 0.2 mol HBr and 0.1 mol NaOH e. 0.2 mol H3PO4 and 0.1 mol NaOH i think e is answer but not ...

Chemistry

The heat of neutralization of HCl(aq) and NaOH(aq) is -55.90 kJ/mol of water produced. If 50.00 mL of 1.16 M NaOH at 25.15 ºC is added to 25.00 mL of 1.79 M HCl at 26.34 ºC in a plastic-foam cup calorimeter, what willthe solution temperature be immediately after the ...

Chemistry(Please check)

Which of the following mixtures will be a buffer when dissolved in 1 liter of water? 0.10 mol Ba(OH)2 and 0.20 mol HCl 0.30 mol KCl and 0.30 mol HCl 0.40 mol NH3 and 0.40 mol HCl 0.20 mol HNO2 and 0.10 mol NaOH 0.20 mol HBr and 0.10 mol KOH My answer is that HNO2 and NaOH will...

Chemistry

when pure sodium hydroxide is dissolved in water , heat is evolved in a laboratory experiment measure a molar heat of solution of sodium hydroxide the following procedure was followed. to a calorimeter containing 300g of water at 20.0 C and 10.65g of NaOH also at 20.0 C was ...

Chemistry

I need help I can't seem to get the right answer. Please help! 1/2 H_2 (g) + 1/2 Cl_2 (g) --> HCl (g) -92.3 kJ/mol Na(s) + 1/2 O_2(g) + 1/2H_2(g) --> NaOH(s) -426.8 kJ/mol NaCl(s) --> Na(s) + 1/2Cl_2(g) 411.1 kJ/mol H_2O(l) -->H_2(g) + 1/2O_2(g) 285.8 kJ/mol HCl(g...

Chemistry

Problem: Assume 200.0 mL of 0.400M HCl is mixed with 200.0 mL of 0.400M NaOH in a coffee-cup calorimeter. The temperature of the solutions before mixing was 25.10°C; after mixing and allowing the reaction to occur, the temperature is 27.78°C. What is the enthalpy chanfe when...

General Chemistry

Starting out with 50 mL of 0.20 M NaHCO3, calculate how many mL of 0.50 M NaOH solution to add to make 100 mL of approximately 0.10 M (total) buffer solution with a pH of 10.35. By adding NaOH, some of the NaHCO3 gets converted to the conjugate Na2CO3. This conjugate acid/base...

moles of water produced?

We mixed HCl and NaOH into water and got this table, all for trial 1 Here is all of the info for trial 1: trial 1: volume of 2 M NaOH used: 50.0 mL initial temperature of NaOH: 24.4 degrees C volume of 2 M HCl used: 50.0 mL initial temperature of HCl: 24.3 degrees C final ...

Grade 12 chemistry

This is the second reaction: HCl(aq)+NaOH(aq)-->NaCl(aq)+H2O(l) (Heat of neutralization) This reaction involves mixing two solutions: 1.00 mol/L NaOH and 1.00 mol/L HCl. Trial 1: 48.0 mL of the NaOH solution is mixed with 47.5 mL of the HCl. The temperature rises from 22.00...

science

Hey, holidays is over. Time to get back to work. whats the answer to this one find the concentration of hcl in g hcl/kg Naoh + Hcl---> b +c 2.991 mol 25.00mL Density=0.952g/ml also Hcl=36.46g/mol I got approx 4.58 x 10^3 g/mol of the top of my head

Chemistry

1. A good indicator will have a(n)____ close to this volume and pH. I think it's endpoint but it's wrong. 2. (part a) What is the pH of the solution created by combining 1.70 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)? ...

Chemistry

In a constant-pressure calorimeter, 65.0 mL of 0.330 M Ba(OH)2 was added to 65.0 mL of 0.660 M HCl. The reaction caused the temperature of the solution to rise from 23.85 °C to 28.35 °C. If the solution has the same density and specific heat as water, what is ΔH for ...

chemistry

Could you help me get a definition for each of these words. for i can have a better understanding of them Thanx Titration gas collection crystalization fractional distillation solvent limiting reagent I have defined titration, gas collection, crystallization, fractional ...

physics

A monatomic ideal gas is thermally insulated, so no heat can flow between it and its surroundings. Is it possible for the temperature of the gas to rise? If the temperature can rise, how does it rise?

chemistry (AP)

The heat of neutralization of HCl (aq) by NaOH is -55.9Kj/mol H2) produced. If 50ml of 1.6M NaOH at 25.15 celsius is added to 25ml of 1.79M HCl at 26.34 celsius in a plastic foam cup calorimeter, what will be solution temperature be immediately after the neutralization ...

Chemistry

I have troubles with a titration of NaOH and HCl. The volume of the HCl is 30 ml and its concentration is 0.1 mol per liter The volume of the NaOH is 25 ml and the concentration is to be worked out. I understand that the reaction ratio for HCl to neutralize NaOH is 1:1. But ...

CHEMISTRY FOR DR. BOB or anyone else

A hypothetical weak acid HA, was combined with NaOH in the following proportions: 0.20 mol HA, 0.08 mol NaOH. The mixture was then diluted to a total volume of 1L, and the pH measured. (a) If pH=4.80, what is the pKa of the acid (b) how many additional moles of NaOH should be ...

chemistry

Which of the following mixtures will result in the formation of a buffer solution when dissolved in 1.00 L of water? i) 0.50 mol HClO2 and 0.25 mol HCl. ii) 0.50 mol HClO2 and 0.25 mol NaOH. iii) 0.50 mol NaClO2 and 0.50 mol HClO2. iv) 0.50 mol NaClO2 and 0.50 mol HCl.

chemistry

530 mL solution 10% HCl has been spilt onto the bench. It cannot be diluted or washed away. How much of the granular NaOH from the container seen in a must be used to neutralise the acid? [Using NaOH: MM = 40 g/mol] 1. I have NaOH + HCl --> NaCl + H2O. 10% HCI in a 530ml ...

Chemistry

50 mL of copper(II) sulfate reacts with 50 mL of sodium hydroxide. Their concentrations are 0.3 M and 0.6 M respectively. The temperature increased to 23.6 C from 23.4 C. Determine the enthalpy change for the reaction in kJ/mol of sodium hydroxide. Q=mcΔT =(50g + 50g)(4....

chemistry

A chemist wishes to prepare 250mL of a buffer that is pH = 4.50. Beginning with 100mL of 0.12 mol L^(-1) acetic acid and a supply of 0.10 mol L^(-1) NaOH, explain how this could be done. How much 0.20 mol L^(-1) NaOH must be added to this buffer to raise the pH to 5.1? If the ...

Chemistry

Determine the moles of ammonia in the following cobalt ammine complex: A sample of .1500 g of the cobalt ammine complex is places in a flask and 25.00mL of .200M HCL is added. a few drops of bromocresol green is added and the titration with .100M to NaOH required 16.42mL. I ...

Chemistry

It was mentioned that the rates of many reactions approximately double for each 10 °C rise in temperature. Assuming a starting temperature of 25 °C, the activation energy would be_____________ in kJ mol-1, if the rate of a reaction were to be twice as large at 35 °C?

Chemistry

1.38 mol HCl and 2.9 mol NaOH react accord- ing to the equation HCl + NaOH −→ NaCl + H2O . If the limiting reactant is HCl, determine the amount of excess reactant that remains. Answer in units of mol.

Chemistry

1.38 mol HCl and 2.9 mol NaOH react accord- ing to the equation HCl + NaOH −→ NaCl + H2O . If the limiting reactant is HCl, determine the amount of excess reactant that remains. Answer in units of mol.

Chemistry

In this reaction solid NaOH is added to approximately 100 mL of 0.500 mol/L HCl. Trial 1: 2.02 g of solid NaOH is added to 102.0 mL of the HCl solution. The temperature goes from 22.00°C to 32.0°C. Calculate the heat evolved in each trial (Q). I'm confused on how to ...

AP Chemistry

(a) What is the pH of a 2.0 molar solution of acetic acid. Ka of acetic acid = 1.8 x 10¯5 (b) A buffer solution is prepared by adding 0.10 liter of 2.0 molar acetic acid solution to 0.1 liter of a 1.0 molar sodium hydroxide solution. Compute the hydrogen ion concentration of ...

Chemistry

In a constant-pressure calorimeter, 60.0 mL of 0.330 M Ba(OH)2 was added to 60.0 mL of 0.660 M HCl. The reaction caused the temperature of the solution to rise from 21.71 °C to 26.21 °C. If the solution has the same density and specific heat as water, what is ΔH for this...

CHEM

Can you please check my work? I got -4.3KJ/mol If this is not right can you tell me what I am doing wrong? Thank you! Questions. 1.a. Use Hess's Law and the measured mean enthalpy changes for the NaOH-HCl and NH3-HCl reactions to calculate the enthalpy change to be expected ...

chemistry

Consider the balanced equation 2A(g) + 3G(g) „\ 2X(g) + Z(g). To a 20.0 L container maintained at a temperature of 127 C were added 0.200 mol of A, 0.500 mol of G, 0.400 mol of X, and 0.600 mol of Z. After equilibrium was established, it was found that 0.340 mol of X was ...

chemistry

5oocm3 of 1.0 mol dm3 of sodium hydroxide solution at room temperature was placed in a styrofoam cup and 25cm3 of 2.0 mol-dm3 of hydrochloric acid was added at the same temperature.The temperature rose by 15.2 degrees celsius. Calculate the heat of neurtralization

chemistry

In a constant-pressure calorimeter, 60.0 mL of 0.930 M H2SO4 was added to 60.0 mL of 0.320 M NaOH. The reaction caused the temperature of the solution to rise from 22.68 °C to 24.86 °C. If the solution has the same density and specific heat as water (1.00 g/mL and 4.184 J/g...

Chemistry

The complete combustion of 0.100 mol of CH4 in oxygen in a bomb calorimeter caused the water of the calorimeter to rise in temperature from 25.00 degrees Celsius to 37.70 degrees Celsius. Suppose that the combustion of the 0.1 mol of CH4 was instead run at constant pressure (1...

Chemistry

500.0 mL of 0.220 mol/L HCl(aq) was added to a high quality insulated calorimeter containing 500.0mL of 0.200 mol/L NaOH(aq).Both solutions had a density of 1g/mL & a specific heat of 4.184 J/g.K.The calorimeter had a heat capacity of 850 J/C.Temperature of entire system rose ...

chemistry

three student chemists measured 50.0 mL of 1.00 M NaOH in separate Styrofoam "coffee cup" calorimeters ( Part B). Brett added 50.0 mL of 1.10 M HCI to his solution of NaOH; Dale added 45.5 mL of 1.10 m HCL 9 eqaul moles) to his NaOH solution. Lyndsay added 50.0 mL of 1.00 m ...

Chemistry

1.9 mol HCl and 3.8 mol NaOH react according to the equation HCl + NaOH −→ NaCl + H2O . Calculate the amount in moles of NaCl formed. Answer in units of mol

chemistry

10mL of 0.500M HCl was added to 50mL of 0.100M NaOH in a coffee cup calorimeter, and the temperature increased from 22.3°C to 23.1°C. What is the experimentally determined enthalpy of neutralization of HCl (in kJ/mol)? The specific heat of water is 4.184J/g•°C, and the ...

Inorganic chemistry

mol KHP = (0.7719g)(1 mol KHP/204.2g) = .0038mol Where are the moles of NaOH? I know that there are 0.02637 L of NaOH and I know M = mol/l I know there are 40g NaOH/mol NaOH There is 1 mol of NaOH in the balanced equation But I do not have grams of NaOH

chemistry

if my reaction is 2Na + 2H2O -> 2NaOH +H2, and i have been given 1 gram of sodium, how would i measure the theoretical change in heat of the reaction, assuming the reactants are at room temperature? Look in your text, probably in the appendix, for delta H0 tables. Those ...

Chemistry

In a constant-pressure calorimeter, 50.0 mL of 0.300 M Ba(OH)2 was added to 50.0 mL of 0.600 M HCl. The reaction caused the temperature of the solution to rise from 24.50 degrees C to 28.59 degrees C. If the solution has the same density and specific heat as water, what is ...

Chemistry

In a constant-pressure calorimeter, 50.0 mL of 0.300 M Ba(OH)2 was added to 50.0 mL of 0.600 M HCl. The reaction caused the temperature of the solution to rise from 24.50 degrees C to 28.59 degrees C. If the solution has the same density and specific heat as water, what is ...

Chemistry

An equilibrium mixture contains 0.250 mol of each of the products (carbon dioxide and hydrogen gas) and 0.200 mol of each of the reactants (carbon monoxide and water vapor) in a 1.00-L container. CO(g) + H2O(g) <-> CO2(g)+ H2(g) How many moles of carbon dioxide would ...

chemistry

A 1.35-gram sample of compound X (of MW 88.0 g/mol) was burned in a bomb calorimeter containing 1700 g of water. A temperature rise of 0.96◦C was observed. ∆Erxn for this reaction is −475 kJ/mol of X. What is the heat capacity of the calorimeter hardware (not...

Chemistry

You are given 75mL of 1mol/L NaOH and 75 mL of 1mol/L HNO3 at atmospheric pressure. After mixing the two compounds, he measured a rise in temperature from 25°C to 32°C. Find the change in energy of the system in kJ/mol. (Known: Density of aqueous solution is 1.00g/mL and ...

chemistry

The standard free energy of activation of a reaction A is 78.2 kJ mol–1 (18.7 kcal mol–1) at 298 K. Reaction B is ten million times faster than reaction A at the same temperature. The products of each reaction are 10.0 kJ mol–1 (2.39 kcal mol–1) more stable than the ...

Chemistry

drwls, if you are there, I got an answer of 42.5 Kelvin, so then that means it is a negative number if converted to degrees Celsius? Question: The heat capacity of a bomb calorimeter is 87.5 kJ/K (this value is for the total heat capacity including that of the water jacket ...

CHEMISTRY> HELP QUICK! pls

Calculate the reaction free energy of: H2(g) + I2(g) 2HI(g) when the concentrations are 0.026 mol L-1 (H2), 0.33 mol L-1 (I2), and 1.84 mol L-1 (HI), and the temperature is 700K. For this reaction Kc= 54 at 700 K. +11.6 kJ mol-1 0 kJ mol-1 -11.6 kJ mol-1 +2273 kJ mol-

MEC

When 25.0 mL of 1.00 M HCl (0.025 mol)is mixed with exactly 25.0 mL of NaOH (0.025 mol) in a calorimeter, the temperature of the solution increased from 25.00 °C to 27.30 °C. (a) Is the reaction exothermic or endothermic? (b) If the specific heat of the solution is 4.18 J/ g...

chemistry

Calculate the pH from the addition of 10 mL of a 0.10 M NaOH solution to 90 mL of 0.10 M HCl. okay so i understand how to do most of it but i get messed up at one part.. so i made my equation: NaOH + HCl -> H2O + NaCl (strong base, strong acid= complete dissociation) so net...

biology

suppose 23mL of NaOH was required. How much Carbonic Acid was neutralized? 1L of .01 NaOH contains ____ mol NaOH? lmL of .01 NaOH contains _____mol NaOH? 23mL of .01 NaOH contains _____ mol NaOH? 2 mol of NaOH react with 1 mol H2CO3 2.3 x 10^-4 mol of NaOH react with ____mol CO2

Chemistry-DrBob222

I got an answer of -1.34 x 10^3 KJ/mol. A 10.00 mL aliquot of 0.100 M NaOH is added to 15.00 mL of 0.100M HCl in a coffee cup calorimeter. The initial temperature of the two dilute liquids were both 25.0 degrees C and the final temperature of the mixture was found to be 37.8 ...

Chemistry

What is the molality of a glucose solution prepared by dissolving 18.0g of glucose, C6H12O6 in 125g of water? A)0.000794 B)0.144 C)0.699 D)0.794 Molality is the number of moles of solute per kilogram of solvent. Because the density of water at 25°C is about 1 kilogram per ...

chemistry

So I did a titration lab at school with NaOH and HCl. i have to find: - volume used, NaOH - Moles of NaOH - Moles of HCl -Volume used unknown HCl - Molarity of HCl solution My concentration of NaOH stock solution was 0.100 mol/lL Final buret reading, NaOH: 14.20 ml Initial ...

Biochem

I did a titiration expriment and I need to work out how much Hcl is in the sample (NaOH). The expriment was testing the rate of ester hydrolysis . I was wondering if the the amount of Hcl present is the same as NaOH added due to the equivalence of the acid and base but I also ...

chemistry

A buffer is prepared consisting of 0.75 mol of sodium dihydrogenphosphate, NaH2PO4, and 0.60 mol of sodium hydrogenphosphate, Na2HPO4, dissolved in 600.0 mL of water. The Ka for the dihydrogenphosphate ion is 6.2 x 10–8 at 25°C. Which of the following is another possible ...

Reposting Chemistry Question -Emergency !!

Saturated solution of Ca(OH)2 in 0.05349 mol/L NaOH. Temperature: 22.1 * C Volume of Ca(OH)2/NaOH aliquot: 25ml Concentration of Standard HCl: 0.1213M Indicator Used: Bromothymol Blue Ksp from previous part I got 3.55x10^-5 - Average volume of HCl added to titrate was 15.05 mL...

chemistry

In the experiment you have added 50.0 mL of Ni(H2O)6 2+ to the calorimeter. To this you add 5.0 mL of ethlylenediamine and measure the change in temperature of the solution as the reaction proceeds. The temperature increases by 3.4 oC. Calculate the enthalpy (H) for ...

AP Biology

The respiration of plants is a biochemical reaction and should have a rate determined by the Arrhenius equation, k = Ae-EA/RT. Here, k is the rate, A is a constant, EA is the activation energy for the reaction, R is the gas constant, and T is the temperature in kelvins. If the...

chemistry

How many moles of magnesium chloride are formed when 55 mL of 0.70 M HCl is added to 42 mL of 1.204 g Mg(OH)2? Mg(OH)2(s) + 2HCl(aq) MgCl2(aq) + 2H2O(l) A. 0.019 mol B. 0.012 mol C. 0.021 mol D. 0.039 mol

Chemistry

If 15.0 mL of a 1.5M HCl solution at 22.5 degrees C is mixed with 25.0mL of a 1.5M NaOH solution at 21.5 degrees C that is in a calorimeter, and the final mixed solution temperature ends up at 28.5 degrees C, 1.)what is the balanced equation for this reaction? 2.) what is the ...

Chemistry

Can you check my calculations, please? It's for a lab we did in order to find the the enthalpy of formation of NH4Cl(s). My final answer was -299.4 kJ, while the theoretical, or actual, value is -314.4 kJ. It was the closest value out of everyone in the entire class. I'm not ...

Chemistry

A 0.450-gram sample of impure CaCO3(s) is dissolved in 50.0 mL of 0.150 M HCl(aq). The equation for the reaction is: CaCO3(s)+2HCl(aq) -> CaCl2(aq) + H2O(l) + CO2(g) The excess HCl(aq) is titrated by 9.75 mL of 0.125 M NaOH(aq). Calculate the mass percentage of CaCO3(s) in ...

chemistry

What mass of sodium hydroxide pellets must be poured into a waste drum containing 20.0 L o 3.0 mol/L sulphuric acid to completely neutralize the waste acid solution? Write a balanced chemical equation for this reaction. okay, so here is the work I already did my balanced ...

Science

Calculate the mass of 3.20 mol of sodium hydroxide, NaOH. M(NaOH) = 40.0g mol-1 Would the following be the correct workings? n= 3.20 mol M=40.0g mol-1 m(NaOH) = n x M = 3.20 mol x 40.0g mol-1 = 128 g NaOH Is this the correct workings?

Chem. thankss!!!

1.0 mol of water (c=4.184 J/g.oC), 1.0 mol of ethanol (c=2.46 J/g.oC), 1.0 mol of carbon tetrachloride (c=0.861 J/g.oC), and 1.0 mol of ethylene glycol (c=2.42 J/g.oC) at 50oC were each placed into a separate coffee cup calorimeter and the temperature recorded. The temperature...

chemistry

50.0 mL of a solution of HCl is combined with 100.0 mL of 1.15 M NaOH in a calorimeter. The reaction mixture is initially at 22.4°C and the final temperature after reaction is 31.2°C. What is the molarity of the HCl solution? You may assume that there is an excess of base (...

Chemistry

1.0L of aqueous solution in which [H2CO3]=[HCO3^-]=0.10M and has [H^+]=4.2E-7. What is the concentration of [H^+] ofter 0.005 mole of NaOH has been added? H2CO3 ==> H^+ + HCO3^- k1 = (H^+)(HCO3^-)/(H2CO3) I don't know if you are supposed to calculate or to look up k1. ...

chemistry

Given a percent yield of 45.0% for the reaction: H2 + Cl2 → 2 HCl(g) How many moles of HCl gas are produced if 15.5 L of Cl2 at STP and excess H2 are reacted? 1. 0.769 mol 2. 0.346 mol 3. 0.622 mol 4. 3.08 mol 5. 1.38 mol 6. 0.156 mol

Chemistry again

How many mol of nitrogen monoxide gas (N2) are in a 1.49 L container at standard temperature and pressure? A. 2.14 x 10–24 mol N2 B. 2.89 x 101 mol N2 C. 8.97 x 1023 mol N2 D. 6.65 x 10–2 mol N2 Apparently my last question didnt make sense so i'm hoping this one does

chemistry

1.2 mol HCl and 3.9 mol NaOH react to this equation, HCl + NaOH=NaCl + H20 If the limited reactant id HCl, calculate the amount of NaCl formed in moles. Please help and explain how to solve this so I may understand it better please and thank you.

Chemistry

I did a lab today in class and part of the lab is to experimentally find the enthalpy for the dissolution of ammonium chloride by dissolving 4.0 g of NH4Cl(s) in 50.0 mL of H2O(l). I got a -5°C temperature change and calculated delta H to be 15 kJ/mol. According to the ...

Chemistry

Instead of using ratios for back titrations we can also use molarities if our solutions are standardized. A 0.188g sample of antacid containing an unknown amount of triprotic base Al(OH)3 was reacted with 25.0mL of 0.101M HCl. The resulting solution was then titrated with 10....

Chemistry

Instead of using ratios for back titrations we can also use molarities if our solutions are standardized. A 0.188g sample of antacid containing an unknown amount of triprotic base Al(OH)3 was reacted with 25.0mL of 0.101M HCl. The resulting solution was then titrated with 10....

Chemistry

When 0.59 mol I2(g) and 0.59 mol H2(g) are placed into a 1.0-L container at a given temperature, 0.30 mol H2(g) is found to be present after the reaction below reaches equilibrium. Calculate Kc at the given temperature. I2(g) + H2(g) 2HI(g)

chemistry

Given .300 L of a buffer solution that is .250 M HC2H3O2 and .50 M NaC2H302, what is the new pH if .0060 mol HCL is added? what about .0060 mol NaOH?

Dr. BOB chemistry help please!

hi At a particular temperature, K = 1.00 102 for the following reaction. H2(g) + I2(g)= 2 HI(g) In an experiment, 1.73 mol H2, 1.73 mol I2, and 1.73 mol HI are introduced into a 1.00 L container. Calculate the concentrations of all species when equilibrium is reached. H2 okay ...

Chemistry

Please help me figure out where I went wrong. HNO3 + KOH -> KNO3 + H2O enthalpy change = -53.4 kJ/mol 55.0 mL of 1.30 mol/L solutions of both reactants, at 21.4°C, are mixed in a calorimeter. What is the final temperature of the mixture? Assume the density of both ...

chem

Calculate the [h3o+] and [oh-], pH and the percent dissociation for both 0.25 mol/L HCl and 0.25 mol/L HCN. 0.25 mol/L HCL [H+] = 0.25 mol/L [OH-] = 1 x 10^-14 / 0.25 = 4 x 10^-14 pH = 0.60 % dissociation = ? ( I don't know how to figure out percent dissociation) For the HCN I...

Chemistry

A 1.00 L flask containing the equilibrium mixture CO +Cl2 <-> COCl2 was found to contain 0.400 mol of COCl2, 0.100 mol of CO, and 0.500 mol of Cl2. If 0.300 mol of CO is added at constant temperature, what will be the new concentrations of each component at equilibrium?(...

Chemistry

This problem of the limiting reactant is: Given the reactant amounts specified in each chemical reaction, dtermine the limiting reactant in each case: (I'm just going to take one problem out of the bunch} HCl + NaOH yeilds NaCl + H2O 2.00 2.50 mol mol (answers have to be in 3 ...

Chemistry

Determination of Ksp, ΔG°, ΔH° and ΔS° for Ca(OH)2. *** Need help on problem #3 & #4 *** CALCULATIONS: 1. Calculate the average solubility of calcium hydroxide, Ca(OH)2, at each temperature. 2. Calculate the Ksp for Ca(OH)2 at each temperature. 3. Calculate ...

chemistry

When 0.752 g of Ca metal is added to 200.0 mL of 0.500 M HCl(aq), a temperature increase of 12.2C is observed. Assume the solution's final volume is 200.0 mL, the density is 1.00 g/mL, and the heat capacity is 4.184 J/gC. (Note: Pay attention to significant figures. Do not ...

Chemistry

How would you calculate the pH of the buffer if 1.0mL of 5.0M NaOH is added to 20.0mL of this buffer? Can someone please explain to me how to do B and C step by step so I could understand it clearly? :) Say, for example, that you had prepared a buffer in which you mixed 10.30 ...

Chemistry

How would you calculate the pH of the buffer if 1.0mL of 5.0M NaOH is added to 20.0mL of this buffer? Can someone please explain to me how to do B and C step by step so I could understand it clearly? :) Say, for example, that you had prepared a buffer in which you mixed 10.30 ...

chem

What is the pH of the solution created by combining 2.40 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)? I understand how to find the pH for the NaOH + HCl solution. However, I'm not sure how to find it for HC2H3O2. I ...

Chemistry

How many moles of NaOH must be added to 1.0 L of 1.4 M HC2H3O2 to produce a solution buffered at each pH? (a) pH = pKa mol (b) pH = 3.07 mol (c) pH = 5.15 mol

AP Chem

NO2 + H2 <-> NO + H2O [H2] = .30 mol/L [NO2] = .20 mol/L [NO] = [H20] = .70 mol/L @ 1000K A. What is the mole fraction of NO in the equilibrium mixture? B. Calculate Kc C. Determine Kp in terms of Kc D. If system is cooled to a lower temperature, 35% of NO is converted ...

Chemistry

0.5g of MG ribbon is reacted with 100ml of 1M HCL. The initial temperature of HCL is 20.4 degrees celsius. After the reaction the highest recorded temperature is 40.7 degrees celsius. Calculate the molar enthalpy of MG. I tried to find mol from HCl and then use nH=mcdeltat. ...

Acid-Base chem

Which of the following would for a buffer if added to 250.0 mL of .150 M SnF2? a).100 mol HCl b).060 mol HCl c).040 mol HCl d).040 mol NaOH e).040 mol HF I figured I could find out the pH of the solution with HCl/NaOH/HF added, and then find the pH when equal amounts of H+ and...

chemistry

Given the thermochemical equation below, calculate the amount of energy released when 250. g of NaOH (molar mass = 40.0 g/mol) reacts with an excess of HCl. Report answer to the correct number of significant figures in units of kilojoules, kJ. NaOH + HCl --> NaCl + H2O ...

chemistry

In a coffee cup calorimeter, 50 mL of 0.1 M HCl and 50 mL of 0.1 M NaOH are mixed to yield the following reaction: HCl + NaOH  NaCl + H2O. The two solutions were initially at 22.1 oC and the final temperature is 24.2 oC. Calculate the heat that accompanies this ...

Chemistry

Mg(s) + 2 HCl(aq) --> MgCl2(aq) + H2 (g) DeltaH= -4.6x10^2 kJ How much heat is evolved when 0.598 g of Mg are dissolved in excess HCl? I'm not sure how to go about this problem. What I thought to do was: 0.598 g x 1 mol Mg/24.31 g Mg x 2 mol HCl/ 1 mol Mg x 36.46 g HCl/ 1 ...

chemistry

An ice cube of mass 10g at -10C is added to the beaker containing 150mL of water at 88.5C. Assuming no heat is lost to the surrounding; calculate the equilibrium temperature for the liquid after the ice melts.(Heat of fusion for H2O = 6.01 kJ/mol. Heat of vaporization 40.67kJ/...

Chemistry

An ice cube of mass 10g at -10C is added to the beaker containing 150mL of water at 88.5C. Assuming no heat is lost to the surrounding; calculate the equilibrium temperature for the liquid after the ice melts.(Heat of fusion for H2O = 6.01 kJ/mol. Heat of vaporization 40.67kJ/...

Chemistry

In the neutralization of HCl and NaOH i was instructed to measure the temperature of the acid HCl prior to mixing the reaction components. I was to assume however, that the NaOH solution was at this same temperature. Is this a reasonable assumption?

chemistry

When 0.373 g of compound X is burned completely in a bomb calorimeter containing 3000 g of water, a temperature rise of 0.341 C is observed. What is ∆Urxn for the combustion of compound X? The hardware component of the calorimeter has a heat capacity of 3.19 kJ/ ◦C...

chemistry

A student mixed 75.0 mL of water containing 0.75 mol HCl at 25�C with 75.0 mL of water containing 0.75 mol of NaOH at 25�C in a foam cup calorimeter. The temperature of the resulting solution increased to 35�C. How much heat in kilojoules was released by ...

Chemistry

time(s) 30 60 120 180 240 300 420 480 t(*c) 13.8 13.8 13.9 13.1 14.2 14.3 14.5 14.7 14.8 b. if t1= 24.5*c, T2= 1.5*C, tr= 23.6*c, and with the tf obtained from the plot, determine Ccal, in J/*C, if the procedure descrived in the laboratory is followed. 3.when 0.600g of metal ...

Pages

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. 21
  22. 22
  23. 23
  24. 24
  25. 25
  26. 26
  27. 27
  28. 28
  29. 29
  30. 30
  31. 31
  32. 32
  33. 33
  34. 34
  35. 35
  36. 36
  37. 37
  38. 38
  39. 39
  40. 40
  41. 41
  42. 42
  43. 43
  44. 44
  45. 45
  46. 46
  47. 47
  48. 48
  49. 49
  50. 50
  51. 51
  52. 52
  53. 53
  54. 54
  55. 55
  56. 56
  57. 57
  58. 58
  59. 59
  60. 60
  61. 61
  62. 62
  63. 63
  64. 64
  65. 65
  66. 66
  67. 67
  68. 68
  69. 69
  70. 70
  71. 71
  72. 72
  73. 73
  74. 74
  75. 75
  76. 76
  77. 77
  78. 78
  79. 79
  80. 80
  81. 81
  82. 82
  83. 83
  84. 84
  85. 85
  86. 86
  87. 87
  88. 88
  89. 89
  90. 90
  91. 91
  92. 92
  93. 93
  94. 94
  95. 95
  96. 96
  97. 97
  98. 98
  99. 99
  100. 100