# . A parallel-plate capacitor has plates of area 0.24 m2 separated by a distance of 0.005 m. What is the strength of the electric field between these plates when this capacitor is connected to a 5-V battery?

71,357 results

### Physics

A parallel plate capacitor has a rectangular plates with length 5cm and width 3cm. They are separated by a distance 12m and hooked up to a 20V battery A.) what is the area of each plate in m^2 B.) assuming nothing else is present on the circuit what is the potential difference...

### Physics

The potential difference between the plates of a parallel plate capacitor is 35 V and the electric field between the plates has strength of 750 V/m. If the plate area is 4.0 × 10-2 m2, what is the capacitance of this capacitor?

A certain parallel plate capacitor consists of two identical aluminium plates each of area 2times 10^-4 m^2.the plates are separated by a distance of 0,03mm, with air occupying the space between the plates. 1-CALCULATE THE CAPACITANCE OF THE CAPACITOR. AND 2-CALCULATE THE ...

### Physics

Consider a charging capacitor made out of two identical circular conducting plates of radius 21 cm. The plates are separated by a distance 8 mm (note that d<<a). The bottom plate carries a positive charge Q(t)= Q0(1+t/T) with Q0 = 5e-06 C and T = 0.005 sec, and the top ...

### physics

An air-filled capacitor consists of two parallel plates, each with an area of 7.60 cm2, separated by a distance of 1.70 mm. If a 19.2-V potential difference is applied to these plates, calculate the following: (a) the electric field between the plates, magnitude (in kV/m) and ...

### Physics

Two parallel plate capacitors have circular plates. The magnitude of the charge on these plates is the same. However, the electric field between the plates of the first capacitor is 2.2e5 N/C, while the field within the second capacitor is 3.8e5 N/C. Determine the ratio r_2/...

### physics

An electromagnetic wave has an electric field strength of 145 V/m at a point P in space at time t. (a) What is the electric field energy density at P? (b) A parallel-plate capacitor whose plates have area 0.110 m2 has a uniform electric field between its plates with the same ...

### physics

a parallel plate capacitor has an area of 5cm^2 and a capacitance of 3.5PF. the capacitor is connected to a 12v battery .after the capacitor is completely charge up the battery is removed. a)what must be the separation of the plates and the charge density on the plate b)what ...

### Help!!

An air-filled capacitor consists of two parallel plates, each with an area of 7.60 cm2, separated by a distance of 1.70 mm. (a) If a 16.0 V potential difference is applied to these plates, calculate the electric field between the plates. kV/m (b) What is the surface charge ...

### physics

I have no clue: Two parallel plate capacitors have circular plates. The magnitude of the charge on these plates are the same. However, the electric field between the plates of the first capacitor is 2.2 x 10^5 N/C, while the field within the second capacitor is 3.8x 10^5 N/C. ...

### PHYSICS

An air-filled capacitor consists of two parallel plates, each with an area of 7.60 cm2, separated by a distance of 1.70 mm. (a) If a 16.0 V potential difference is applied to these plates, calculate the electric field between the plates. kV/m (b) What is the surface charge ...

### PHYSICS

An air-filled capacitor consists of two parallel plates, each with an area of 7.60 cm2, separated by a distance of 1.70 mm. (a) If a 16.0 V potential difference is applied to these plates, calculate the electric field between the plates. kV/m (b) What is the surface charge ...

### Physics

An air-filled capacitor consists of two parallel plates, each with an area of 7.60 cm2, separated by a distance of 1.70 mm. (a) If a 16.0 V potential difference is applied to these plates, calculate the electric field between the plates. kV/m (b) What is the surface charge ...

### physics

An air-filled capacitor consists of two parallel plates, each with an area of 7.60 cm2, separated by a distance of 1.70 mm. (a) If a 16.0 V potential difference is applied to these plates, calculate the electric field between the plates. kV/m (b) What is the surface charge ...

### PHYSICS

An air-filled capacitor consists of two parallel plates, each with an area of 7.60 cm2, separated by a distance of 1.70 mm. (a) If a 16.0 V potential difference is applied to these plates, calculate the electric field between the plates. kV/m (b) What is the surface charge ...

### PHYSICS

An air-filled capacitor consists of two parallel plates, each with an area of 7.60 cm2, separated by a distance of 1.70 mm. (a) If a 16.0 V potential difference is applied to these plates, calculate the electric field between the plates. kV/m (b) What is the surface charge ...

### PHYSICS

An air-filled capacitor consists of two parallel plates, each with an area of 7.60 cm2, separated by a distance of 1.70 mm. (a) If a 16.0 V potential difference is applied to these plates, calculate the electric field between the plates. kV/m (b) What is the surface charge ...

### PHYSICS

An air-filled capacitor consists of two parallel plates, each with an area of 7.60 cm2, separated by a distance of 1.70 mm. (a) If a 16.0 V potential difference is applied to these plates, calculate the electric field between the plates. kV/m (b) What is the surface charge ...

### PHYSICS

An air-filled capacitor consists of two parallel plates, each with an area of 7.60 cm2, separated by a distance of 1.70 mm. (a) If a 16.0 V potential difference is applied to these plates, calculate the electric field between the plates. kV/m (b) What is the surface charge ...

### Physics

The electric field between the plates of a paper-separated capacitor is 8.18×104 . The plates are 2.20 apart, and the charge on each plate is 0.795 .Determine the capacitance of this capacitor. Determine the area of each plate.

### Physics

An electromagnetic wave has an electric field strength of 145 V/m at a point P in space at time t. A parallel-plate capacitor whose plates have area 0.109 m2 has a uniform electric field between its plates with the same energy density as the answer to part a. What is the ...

### Physics

A certain parallel capacitor consist of two identical aluminium plates, each of area 2times 10^-4m^2. the plates are separated by a distance of 0,03mm, with air occupying the space between the plates. CALCULATE THE CAPACITANCE OF THE CAPACITOR. AND ALSO CALCULATE THE CHARGE ...

### College Physics

A 12.0- A 12.0- A 12.0-V battery remains connected to a parallel plate capacitor with a plate area of 0.204m^2 and a plate separation of 3.14mm . What is the charge on the capacitor? Q = C How much energy is stored in the capacitor? Uc = J What is the electric field between ...

### Physics

The electric field between the plates of a paper-separated (K = 3.75) capacitor is 9.21 104 V/m. The plates are 2.05 mm apart and the charge on each plate is 0.775 µC. Determine the capacitance of this capacitor.

### Physics

A q = +3.00 mC test charge is placed inside a constant uniform electric field created in a parallel plate capacitor connected to a battery of unknown voltage.   The capacitor is made of two parallel plates each with area equal to 0.250 m2 separated by a distance of 0.0400 m ...

### physics parallel plate

A proton traveling at a speed 1.0*106 m/s of enters the gap between the plates of a 2.0-cm-wide parallel-plate capacitor. The surface charge densities on the plates are 1*10^-6 C/m2. How far has the proton been deflected when it reaches the far edge of the capacitor? Assume ...

### Physics

A parallel-plate capacitor is constructed from two circular metal plates or radius R. The plates are separated by a distance of 1.2mm. 1. What radius must the plates have if the capacitance of this capacitor is 1.1 uF? 2. If the separation between the plates is increased, ...

### Physics

A parallel-plate capacitor is constructed from two circular metal plates or radius R. The plates are separated by a distance of 1.2mm. 1. What radius must the plates have if the capacitance of this capacitor is 1.1 uF? 2. If the separation between the plates is increased, ...

### Physics

Find the electric field between the plates of a capacitor given the following: (1) C= 10pF (2) the capacitor is connected to a 25 V battery (3) there is a vacuum between the capacitor plates (4) plate separation is 2 mm

### College physics

Open Question: Find the electric field between the plates of a capacitor given the following:? (1) C= 10pF (2) the capacitor is connected to a 25 V battery (3) there is a vacuum between the capacitor plates (4) plate separation is 2 mm

### Physics

Consider the process of charging a parallel plate capacitor with circular plates of radius R=5 cm separated by a distance d=0.2 cm. At some time t1, the capacitor is being charged with a current I=0.04 A. Consider a point P on the plane which is equally distant from the two ...

### Physics

Consider the process of charging a parallel plate capacitor with circular plates of radius R=5 cm separated by a distance d=0.2 cm. At some time t1, the capacitor is being charged with a current I=0.04 A. Consider a point P on the plane which is equally distant from the two ...

### Physics

A parallel plate air capacitor of capacitance 245pF has a charge of magnitude 0.148ìC on each plate. The plates are 0.328mm apart. (a) What is the potential difference between the plates? (b) What is the area of each plate? (c) What is the electric field magnitude between the...

### physics

The plates of a parallel plate capacitor each have an area of 0.40 m2 and are separated by a distance of 0.02 m. They are charged until the potential difference between the plates is 3000 V. The charged capacitor is then isolated. How much work is required to move a –4.0 ìC...

### Capacitor

A parallel plate capacitor with plates of area 320 cm.^2 is charged to a potential difference V and is then disconnected from the voltage source. When the plates are moved 0.3 cm. farther apart, the voltage between the plates is increased by 152 V. What is the charge on the ...

### Physics

A capacitor consists of a set of two parallel plates of area A separated by a distance d. This capacitor is connected to a battery that maintains a constant potential difference between the plates and has charge Q1. If the separation between the plates is doubled, what will ...

### physics

An electron is released from rest at the negative plate of a parallel plate capacitor and accelerates to the positive plate (see the drawing). The plates are separated by a distance of 1.3 cm, and the electric field within the capacitor has a magnitude of 2.7 x 106 V/m. What ...

### Physics

An electron is released from rest at the negative plate of a parallel plate capacitor and accelerates to the positive plate (see the drawing). The plates are separated by a distance of 1.4 cm, and the electric field within the capacitor has a magnitude of 3.5 106 V/m. What is ...

### physics

Two parallel plates, separated by 10 mm, are charged to a potential difference of 50 V (that is, one plate is 0 V and the other plate is 50 V). Which of the following statements are true? the electric potential at the midpoint between the plates is 50 V the electric field ...

### Physics

The electric field between the plates of a paper-separated (K = 3.75) capacitor is 9.01X10^4 V/m. The plates are 1.95 mm apart and the charge on each plate is 0.775 µC. I figured out that the capacitance is 4.4e-9F but I need help finding the area.

### physics

The plates of a parallel plate capacitor are separated by a distance of 1.2cm, and the electric field within the capacitor has a magnitude of 2.1x 10^6 V/m. An electron starts from rest at the negative plate and accelerates to the positive plate. What is the kinetic energy of ...

### Physics

A parallel-plate capacitor is constructed with circular plates of radius 0.056 m. The plates are separated by 0.25 mm, and the space between the plates is filled with dielectric with dielectric constant k. When the charge on the capacitor is 1.2 uc the potential difference ...

### Physics

A parallel-plate capacitor is constructed with circular plates of radius 5.6×10−2 m . The plates are separated by 0.27 mm , and the space between the plates is filled with a dielectric with dielectric constant κ. When the charge on the capacitor is 1.9 μC the ...

### physics

The positive and negative plates of a parallel-plate capacitor have an area of 1.05 cm by 1.05 cm. Their surface charge densities are +1.00×10-6 C/m2 and -1.00×10-6 C/m2, respectively. A proton moving parallel to the plates enters the middle of the space between them at a ...

### Physics

an electron is launched at a 30 degree angle with respect to the horizontal and a speed of 3.0*10^6 m/s from the positive plate of the parallel plate capacitor. THe plats of the capacitor are oriented horizontally. The electron lands 5 cm away from the point of release. a) ...

### physics

11. The charged plates of a parallel plate capacitor each have a charge density of 3 x 10-3 C/m2. What is the electric field E between the plates?

### physics

11. The charged plates of a parallel plate capacitor each have a charge density of 3 x 10-3 C/m2. What is the electric field E between the plates?

### Physics

The charged plates of a parallel plate capacitor each have a charge density of 3 x 10-3 C/m2. What is the electric field E between the plates?

### physics

Consider the process of charging a parallel plate capacitor with circular plates of radius R=5 cm separated by a distance d=0.2 cm. At some time t1, the capacitor is being charged with a current I=0.075 A. Consider a point P on the plane which is equally distant from the two ...

### Physics

The electric field between two equally but oppositely charged parallel plates is 2.35 N/C [south]. If a charge of –2.00 C was placed at the midway point between the plates, what force (magnitude and direction) would act on the charge? Give the direction as acting north or ...

### Physics

Two plates, each of area 3.40*10-4 m2, are used to construct a parallel-plate capacitor with capacitance 1.20 pF. (a) Find the necessary separation distance. d = ?m (b) If the positive plate is to hold a charge of 4.70* 10-12 C, find the charge density. σ = ?C/m2 (c) Find...

### Physics

If the electric field inside a capacitor exceeds the dielectric strength of the dielectric between its plates, the dielectric will break down, discharging and ruining the capacitor. Thus, the dielectric strength is the maximum magnitude that the electric field can have without...

### Physics

Two charges are placed between the plates of a parallel plate capacitor. One charge is +q1 and the other is q2= +5.00x10^-6 C . The charge per unit area on each plate has a magnitude of sigma=1.30 x 10^-4 C/m^2. The force on q1 due to q2 equals the force on q1 due to the ...

### Physics

Two charges are placed between the plates of a parallel plate capacitor. One charge is +q1 and the other is q2= +5.00x10^-6 C . The charge per unit area on each plate has a magnitude of sigma=1.30 x 10^-4 C/m^2. The force on q1 due to q2 equals the force on q1 due to the ...

### Capacitance

A parallel plate capacitor with plates of area 320 cm.^2 is charged to a potential difference V and is then disconnected from the voltage source. When the plates are moved 0.3 cm. farther apart, the voltage between the plates is increased by 152 V. What is the charge on the ...

### Physics

A paralle plate air capacitor has a capacitance of 500.0 pF and a charge of magnitude 0.200 uC on each plate. The plates are 0.6 mm apart. (a) What is the potenetial difference between the plates? (b) What is the area of each plate? (c) What is the electric field magnitude ...

### Physics

The plates of a parallel-plate capacitor are separated by 0.303 mm. If the material between the plates is air, what plate area is required to provide a ca- pacitance of 3.78 pF ? The permittivity of a vacuum is 8.8542 × 10−12 F/m. Answer in units of m2

### physics

a current of 10A flows into a parallel plate capacitor with square plates with area .5m^2 how do you find the dE/dt between the plates? what is the line integral B.dl around a circular closed contour with a diameter of 10cm perpendicular to the electric field?

### Physics

Doubling the voltage across a parallel plate capacitor does not double which of the following? a. the charge b. the electric field between the plates c. the energy stored d. the electric force on the plates e. both a and b is the answer A if not then how do i do this problem

### Physics

Doubling the voltage across a parallel plate capacitor does not double which of the following? a. the charge b. the electric field between the plates c. the energy stored d. the electric force on the plates e. both a and b is the answer A if not then how do i do this problem

### physics

A capacitor has circular plates of radius \(r = 12\,cm\) that are now a distance \(d = 0.2\,cm\) apart. If this particular capacitor is hooked up to a \(12\,V\) battery, what is the value of the Electric Field between the two plates in \(N/C\)?

### physics

The charged plates of a parallel plate capacitor each have a charge density of sigma C/m^2. Using Gauss's law, compute the electric field between the plates.

### physics

A capacitor has circular plates of radius r=12cm that are a distance d=0.1cm apart. The capacitor is hooked up to a 12V battery. If the plates are pulled apart so that they are now a distance d=0.2cm apart, what magnitude of charge accumulates on each plate in C? A capacitor ...

### Col Physics

If a capacitor has opposite 5.3 micro-Coloumb charges on the plates, and an electric field of 2.3 kV/mm is desired between the plates, what must each plate's area be?

### PHYSICS

A parallel-plate capacitor has plates with an area of 450 cm^2 and an air-filled gap between the plates that is 2.30 mm thick. The capacitor is charged by a battery to 570 V and then is disconnected from the battery. How much energy is stored in the capacitor? (muJ) The ...

### physics

A parallel-plate capacitor has plates with an area of 450 cm^2 and an air-filled gap between the plates that is 2.30 mm thick. The capacitor is charged by a battery to 570 V and then is disconnected from the battery. How much energy is stored in the capacitor? (muJ) The ...

### physics

1) A parallel plate capacitor has a potential difference between its plates of 1.2 V and a plate separation distance of 2.0 mm. What is the magnitude of the electric field if a material that has a dielectric constant of 3.3 is inserted between the plates? 2) Three point ...

### physics

Two parallel plates separated by a distance of 2.0 x 10^-2 meter are charged to a potential difference of 1.0 x 10^2 volts. Points A, B, and C are located in the region between the plates. Calculate the magnitude of the electric field strength between the plates.

### physics

Two parallel plates separated by a distance of 2.0 x 10^-2 meter are charged to a potential difference of 1.0 x 10^2 volts. Points A, B, and C are located in the region between the plates. Calculate the magnitude of the electric field strength between the plates.

### physics

An air filled parallel plate capacitor has plates of area 0.0406 m^2 and seperation of 2.5*10^-6 m. a)What is the capacitence for the setup? b)Our capacitor is connected to a 550 v battery, how much energy is stored in the capacitor? c) If -1 mJ of work is performed by the ...

### physics

An air filled parallel plate capacitor has plates of area 0.0406 m^2 and seperation of 2.5*10^-6 m. a)What is the capacitence for the setup? b)Our capacitor is connected to a 550 v battery, how much energy is stored in the capacitor? c) If -1 mJ of work is performed by the ...

### physics

An air filled parallel plate capacitor has plates of area 0.0406 m^2 and seperation of 2.5*10^-6 m. a)What is the capacitence for the setup? b)Our capacitor is connected to a 550 v battery, how much energy is stored in the capacitor? c) If -1 mJ of work is performed by the ...

### capacitor

A capacitor is made up of two metal plates, each having an area of 0.02 m2 and spaced 2.5 mm apart. A potential difference of 250 V across the plates establishes a charge of 50 nC. Calculate: a) The electric field strength, b) The electric flux density, c) The absolute ...

### physics

A parallel plate capacitor has square plates of side L= 12 cm and a distance d= 2 cm between the plates. Half of the capacitor areae is filled with a dielectric with k1 = 35. the other half is filled with a different dielectric with k2 = 8. The effective( equivalent ...

### Physics

A capacitor is made from two parallel plates separated by a distance d, and each has area A. The capacitor holds a charge Q. (a) What is the energy stored in the capacitor? (b) A mechanical force pulls the plates apart, without changing the stored charge, until they are 2d ...

### Physics

The equipotential lines inside a parallel plate capacitor a) circles clockwise b)circles counterclockwise c)radiates inwards d)radiates outwards e)runs parallel to capacitor plates f)runs perpendicular to capacitor plates I have narrowed it down to either e) or f) but I think ...

### physics

The magnitude of the electric field between two plates of a parallel plate capacitor is 2.4×10^5 N/C. Each plate carries a charge whose magnitude is o.15 mC. What is the area of each plate?

### physics

The magnitude of the electric field between the plates of a parallel plate capacitor is 3.0X10^5 N/C. Each plate carries a charge whose magnitude is 0.17 µC. What is the area of each plate?

### Physics

A parallel-plate capacitor is constructed of two horizontal 15.2-cm-diameter circular plates. A 1.9 g plastic bead, with a charge of -5.6 nC is suspended between the two plates by the force of the electric field between them. What is the charge on the positive plate?

### physics

The magnitude of the electric field between the plates of a parallel plate capacitor is 3.0X10^5 N/C. Each plate carries a charge whose magnitude is 0.17 µC. What is the area of each plate? can someone please work with it in numbers!!

### physic's problem

A square parallel plate capacitor in a circuit with a 2.0 V battery is replaced with a new one. If the sides of the new plates are 3 × as large as those of the old, and the distance between the plates is 1/4 of the distance between the old plates, then the maximum potential ...

### PHYSICS

In the early 1900s, Robert Millikan used small charged droplets of oil, suspended in an electric field, to make the first quantitative measurements of the electron’s charge. A 0.67-um-diameter droplet of oil, having a charge of +e, is suspended in midair between two ...

### Physics

A parallel-plate capacitor has a capacitance of 2.1 µF with air between the plates. The capacitor is connected to a 24 V battery and charged. The battery is then removed. When a dielectric is placed between the plates, a potential difference of 2.8 V is measured across the ...

### physics

In Figure 20.2 is a velocity selector that can be used to measure the speed of a charged particle. A beam of particles is directed along the axis of the instrument. A parallel plate capacitor sets up an electric field E which is oriented perpendicular to a uniform magnetic ...

### ASU

Oppositely charged parallel plates are separated by 5.35 mm. A potential difference of 600 V exists between the plates. (a) What is the magnitude of the electric field between the plates? (b) What is the magnitude of the force on an electron between the plates? N (c) How much ...

### Physics

A certain substance has a dielectric constant of 2.8 and a dielectric strength of 18.0 MV/m. If it is used as the dielectric material in a parallel-plate capacitor, what minimum area should the plates of the capacitor have to obtain a capacitance of 7.00×10-8 F and to ensure ...

### physics

A parallel capicitor is made of two plates with cross sectional area A which are separated by a distance d (with a vacuum between the plates). The capacitor is connected to a battery until a charge Q is stored on it and a total potential difference VC is measured across the ...

### Physics

A capacitor has two overlapping plates of width 4.9 m and length 3.5 m separated by 1.3 cm. A dielectric of dielectric constant ê = 58.0 fills the space between the plates. If this capacitor is connected to a 35 V battery, how much energy is stored in the capacitor when it is...

### Physics

Two parallel conducting plates are separated by 10.0 cm, and one of them is taken to be at zero volts. (a) What is the electric field strength between them, if the potential 8.50 cm from the zero volt plate (and 1.50 cm from the other) is 540 V? (b) What is the voltage between...

### physics

Two parallel conducting plates are separated by 10.0 cm, and one of them is taken to be at zero volts. (a) What is the electric field strength between them, if the potential 8.50 cm from the zero volt plate (and 1.50 cm from the other) is 450 V? kV/m (b) What is the voltage ...

### Physics

A parallel-plate capacitor is designed so that the plates can be pulled apart. The capacitor is initially charged to a potential difference of 80 Volts when the plates are 1.0 mm apart. The plates are insulated so that the charge cannot leak off. What is the potential ...

### pjysics

A capacitor that has 10 cm diameter plates, 0.1mm apart, is charged at 100 V and the battery removed afterwards. What are the charges on each of the platesimmediately after charging the capacitor? What is the voltage if the distance between plates is increased to 0.5 mm? How ...

### Physics

A capacitor is constructed from two conducting with a plate separation of d. The voltage between the plates is 31.2 volts and the electric field between the two plates is measured to be E = 2805 V/m. What is the minimum amount of force needed to push an electron from the ...

### PHYSICS

A doubly charged ion is accelerated to an energy of 34.0 keV by the electric field between two parallel conducting plates separated by 2.00 cm. What is the electric field strength between the plates?

### Physics

A doubly charged ion is accelerated to an energy of 33.0 keV by the electric field between two parallel conducting plates separated by 1.70 cm. What is the electric field strength between the plates?

### College Physics

A doubly charged ion is accelerated to an energy of 33.0 keV by the electric field between two parallel conducting plates separated by 1.70 cm. What is the electric field strength between the plates?

### Physics

(a) Find the capacitance of a parallel-plate capacitor made of two 5 cm×5 cm square plates separated by 1 mm. (b) If 50 V is applied to this capacitor, how much energy is stored?

### physics

An electron is released from rest at the negative plate of a parallel plate capacitor. The charge per unit area on each plate is = 2.6 x 10-7 C/m2, and the plates are separated by a distance of 1.4 x 10-2 m. How fast is the electron moving just before it reaches the positive ...

### physics

Which of the statements regarding this situation are true? Select all that apply. -In this simulation when the capacitor voltage is set to a positive value the top plate has a positive charge on it and the bottom plate has a negative charge on it. -In general, decreasing the ...

### physics

A parallel plate capacitor having plates 6.0 cm apart is connected across the terminals of a 12.0 V battery. (a) Being as quantitative as you can, describe the location and shape of the equipotential surface that is at a potential of +6.0 V relative to the potential of the ...