Physics

he weight of the block in the drawing is 77.0 N. The coefficient of static friction between the block and the vertical wall is 0.490. (a) What minimum magnitude of the force is required to prevent the block from sliding down the wall? (Hint: The static frictional force exerted by the block is directed upward, parallel to the wall.) (b) What minimum force is required to start the block moving up the wall? (Hint: The static frictional force is now directed down the wall.) Angle is 40 degrees.

  1. 4
asked by Samantha
  1. 1.23̅4

    posted by Steve
  2. 1.23̄4

    posted by Steve
  3. 2.6̅

    posted by Steve
  4. 1.23U+203E4

    posted by Steve

Respond to this Question

First Name

Your Response

Similar Questions

  1. @ elena

    In the figure the coefficient of static friction between mass (MA) and the table is 0.40, whereas the coefficient of kinetic friction is 0.28 ? part a) What minimum value of (MA) will keep the system from starting to move? part b)
  2. physics

    One last question: If a 12lb. block is slowly tilted from horizontal when the plank reaches 30 degrees the block begins to slide. To find the coefficient of the static friction you take the tangent form of 30 degrees? To find the
  3. science

    To measure the static friction coefficient between a 1.7-kg block and a vertical wall, the setup shown in the drawing is used. A spring (spring constant = 416 N/m) is attached to the block. Someone pushes on the end of the spring
  4. physics

    To measure the static friction coefficient between a 1.6-kg block and a vertical wall, the setup shown in the drawing is used. A spring (spring constant = 400 N/m) is attached to the block. Someone pushes on the end of the spring
  5. physics

    A 10-KG block is pulled along a rough horizontal floor by a 12-N force acting at a 30 degrees angle with respect to the horizontal. The block accelerates at 0.1 m/s2. Calculate A....... the weight of the block B...... the force of
  6. physics

    A 10-KG block is pulled along a rough horizontal floor by a 12-N force acting at a 30 degrees angle with respect to the horizontal. The block accelerates at 0.1 m/s2. Calculate A....... the weight of the block B...... the force of
  7. Physics

    A 10-KG block is pulled along a rough horizontal floor by a 12-N force acting at a 30 degrees angle with respect to the horizontal. The block accelerates at 0.1 m/s2. Calculate A....... the weight of the block B...... the force of
  8. physics

    if the weight of the block,W,is 2.5 kilogram,the coefficient of static friction,0.25,and the coefficient of kinetic friction,0.15,determine: (a) the force necessary to hold the block sliding down (b) the force necessary to pull
  9. Physics/Math

    A 17 N horizontal force F pushes a block weighing 6.0 N against a vertical wall. The coefficient of static friction between the wall and the block is 0.68, and the coefficient of kinetic friction is 0.48. Assume that the block is
  10. physics

    1. The weight in the following diagram has a mass of 0.750 kg and the cart has a mass of 0.52 kg. There is a friction force of 2.1 N acting on the cart. What is the tension in the string? a. 4.4 N b. 4.3 N c. 4.1 N d. 4.2 N 2. An

More Similar Questions