The figure below presents the EQE of a triple junction solar cell with junctions A, B and C under short circuited (V = 0 V) condition.

a) What is the bandgap (in eV) of the absorber layer of the junction A?

b) What is the bandgap (in eV) of the absorber layer of the junction B?

c) What is the bandgap (in eV) of the absorber layer of the junction C?

d) Which of the following statements is TRUE?

1)Junction C acts as the top cell, Junction B as the middle cell, and Junction A as the bottom cell.

2)Junction B acts as the top cell, Junction C as the middle cell, and Junction A as the bottom cell.

3)Junction A acts as the top cell, Junction B as the middle cell, and Junction C as the bottom cell.

Each junction is illuminated under standard test conditions. Given the photon fluxes below, calculate the short-circuit current density (in mA/cm2) of each (separate) junction (A, B and C):

ϕ=9.3∗1020m−2s−1 for 300nm<λ<650nm

ϕ=8.4∗1020m−2s−1 for 650nm<λ<850nm

ϕ=1.4∗1021m−2s−1 for 850nm<λ<1250nm

e) Jsc of Junction A:

f) Jsc of Junction B:

g) Jsc of Junction C:

h) The Voc of each junction in V can be roughly estimated by the equation

Voc=Egap(J)2q=Egap(eV)2
where q is the elementary charge, Egap(J) is the bandgap energy expressed in Joules, and Egap(eV) is the bandgap energy expressed in eV. Assume a fill factor of FF=0.75. What is then the efficiency (in %) of the triple junction solar cell?

1. 👍
2. 👎
3. 👁
1. d) Junction A acts as the top cell, Junction B as the middle cell, and Junction C as the bottom cell.

1. 👍
2. 👎
2. Can you also give out the rest of the answers?? thanks

1. 👍
2. 👎
3. Someone has the others results please???

1. 👍
2. 👎
4. Hey guys i exchange the answers of this question with the assignment 5...
just let me know

1. 👍
2. 👎
5. hi

anyone have the answers to this Q

1. 👍
2. 👎

1. 👍
2. 👎
7. a 1447
b.45
c.25

1. 👍
2. 👎
8. None is true answer sorry

1. 👍
2. 👎
9. This is the link to the image

postimg org/image/fsra4o0h1/

1. 👍
2. 👎

1. 👍
2. 👎
11. The figure below presents the EQE of a triple junction solar cell with junctions A, B and C under short circuited (V = 0 V) condition.
EQE table is:

A: EQE = 0.7 wavelength= 300 to 650 nm
B: EQE = 0.9 Wavelength= 650 to 850 nm
C: EQE = 0.8 Wavelength= 850 to 1250 nm

a) What is the bandgap (in eV) of the absorber layer of the junction A?

b) What is the bandgap (in eV) of the absorber layer of the junction B?

c) What is the bandgap (in eV) of the absorber layer of the junction C?

d) Which of the following statements is TRUE?

Junction C acts as the top cell, Junction B as the middle cell, and Junction A as the bottom cell.
Junction B acts as the top cell, Junction C as the middle cell, and Junction A as the bottom cell.
Junction A acts as the top cell, Junction B as the middle cell, and Junction C as the bottom cell

TRIPLE JUNCTION SOLAR CELL - III
Each junction is illuminated under standard test conditions. Given the photon fluxes below, calculate the short-circuit current density (in mA/cm2) of each (separate) junction (A, B and C):

ϕ=9.3∗1020m−2s−1 for 300nm<λ<650nm

ϕ=8.4∗1020m−2s−1 for 650nm<λ<850nm

ϕ=1.4∗1021m−2s−1 for 850nm<λ<1250nm

e) Jsc of Junction A:

f) Jsc of Junction B:

g) Jsc of Junction C:

TRIPLE JUNCTION SOLAR CELL - IV
h) The Voc of each junction in V can be roughly estimated by the equation

Voc=Egap(J)2q=Egap(eV)2
where q is the elementary charge, Egap(J) is the bandgap energy expressed in Joules, and Egap(eV) is the bandgap energy expressed in eV. Assume a fill factor of FF=0.75. What is then the efficiency (in %) of the triple junction solar cell?

1. 👍
2. 👎
12. bandgaps:
a) 1.9
b) 1.46
c) 0.992

1. 👍
2. 👎
13. @foxman thinks

1. 👍
2. 👎
e,f,g,h parts

1. 👍
2. 👎

1. 👍
2. 👎
16. e) 10.4302
f) 12.1125
g) 17.9444

1. 👍
2. 👎
17. H. 17.022

1. 👍
2. 👎
18. d) Which of the following statements is TRUE?

1-Junction C acts as the top cell,
2-Junction B as the middle cell, and
3-Junction A as the bottom cell.
Junction B acts as the top cell, Junction C as the middle cell, and Junction A as the bottom cell. Junction A acts as the top cell, Junction B as the middle cell, and Junction C as the bottom cell.

1. 👍
2. 👎
19. d) Junction A top
Junction B middle
Junction C bottom

1. 👍
2. 👎
20. Que.4-- C

1. 👍
2. 👎
21. To find the answer is pretty simple. E= h*c/λ*q
Where,
h is the planck's constant
c is the speed light in vacuum
λ is the wavelength
q is the elementary charge

1. 👍
2. 👎

## Similar Questions

1. ### Solar Energy Help ASAP

The current density of an ideal p-n junction under illumination can be described by: J(V)=Jph−J0(eqVkT−1) where Jph is the photo-current density, J0 the saturation-current density, q the elementary charge, V the voltage, k the

Solar simulators are used to study the performance of solar cells in the lab. In the figure below (left picture), the spectral power density of a solar simulator is shown with the blue line. The spectral power density of this

3. ### Physics

A given solar cell has the following specifications: Isc=4A Voc=0.7V 36 identical cells with the above specifications are to be interconnected to create a PV module. 1- What is the open-circuit voltage (in V) of the PV module if

Figure 1 shows a simplication of the AM1.5 solar spectrum at 1000W/m2. The spectrum is divided in three spectral ranges: A for 0nm

1. ### Solar Energy Help ASAP

A solar cell with dimensions 12cm x 12cm is illuminated at standard test conditions. The cell presents the following external parameters: Voc=0.8V,Isc=3A,Vmp=0.75V,Imp=2.5A Calculate the fill factor in percentage [%]: Calculate

2. ### Solar Energy Help ASAP

Let's assume that solar light reaches a silicon solar cell with an angle of incidence of θi=0o. For simplicity, let's consider the refractive index of silicon to be nSi=3.5. The refractive index of air is nair=1. What percentage

3. ### Science

Which of the following is a problem with using solar power as a main source of energy? A. People do not yet have the technology to use solar power*** B. The sun is not close enough to provide solar energy C. Power from solar

1-Consider an organic solar cell consisting of a TiO2 semiconductor with an ionization energy 7.8eV and a polymer with an electron affinity 3.4eV. Which of the followning band diagrams corresponds to the organic solar cell. The

In this section, we talked about combining a solar cell with a photoelectrode to form a photoelectrochemical device. Why do we add a solar cell in the system? a)Because the photoelectrode is not able to produce any voltage

2. ### solar cells

Imagine that you are in the lab and you can decide the thickness of the Si layer of your solar cell. You want to optimize the solar cell performance for a wavelength of λ=1000nm, for which the absorption coefficient is

3. ### CIGS AND CDTE FABRICATION

During manufacturing of a CIGS device, the metal back contact is deposited first, while in case of the CdTe solar cells, the back contact is deposited in the last processing step. What are the configurations of both cells: a) Both

4. ### physics help

At a certain location, the solar power per unit area reaching the Earth's surface is 180 W/m2 averaged over a 24-hour day. Suppose you live in a solar powered house whose average power requirement is 3.2 kW. At what rate must