chemistry

You transfer a 2M stock solution of Y into a container using a slightly wet pipet containing water drops. The concentration of the transferred solution Y has a ?

(lower, higher, or same) concentration than(as) 2M.

  1. 👍 0
  2. 👎 0
  3. 👁 64
asked by Un
  1. Let's see. The pipet has 2 M stock solution in it PLUS some water so it isn't quite 2 M is it?

    1. 👍 0
    2. 👎 0
    posted by DrBob222

Respond to this Question

First Name

Your Response

Similar Questions

  1. chemistry

    1) To prepare a 200 mL of aqueous stock solution X, you transferred 50 mL of a known concentration solution into a 200 mL volumetric flask. If you realize that the volumetric flask was contaminated with water droplets after you

    asked by Brad on January 12, 2009
  2. acid-base titrations

    For each of the following circumstances, indicate whether the calculated molarity of NaOH would be lower, higher or unaffected. Explain your answer in each case. a.the inside of the pipet used to transfer the standard HCI solution

    asked by natash on April 21, 2008
  3. chemistry

    Transfer the tablet to a clean 125-mL Erlenmeyer flask. Add 10-mL of 1M NaOH and heat the mixture to a gentle boil. Once the solution has cooled to room temperature, transfer it to a 100-mL vol. flask. Using the diluted solution

    asked by eng on January 31, 2010
  4. Chemistry

    You are a lab technician and must create 250 ml of a 17% salt solution. You have available three stock solutions. You have a one liter container of a 5% salt, a 500 ml container of a 28% salt solution, and a 400 ml container of a

    asked by Fatih on March 5, 2012
  5. Chemistry

    You have a stock 0.100 M solution of KMnO4 and a series of 100-mL volumetric flasks. What volumes of the stock solution will you have to pipet into the flasks to prepare standards of 1.00, 2.00, 5.00, and 10.0x10^-3M KMnO4

    asked by confused on March 19, 2013
  6. College Chemistry

    given the concentration of 125.0mg/L of Fe(2+)in the stock solution and the volume used which is (1.00mL) how do i calculate the concentration of iron(II) ions in mg/L? i pipet 1.00mL of the stock into a 250ml volumetric flask!

    asked by Anonymous on July 12, 2012
  7. Math - urgent

    2. A technician has prepared three solutions from a 600 mL stock solution. • In preparing the first solution ½ of the original volume of the stock solution was used. • The second solution required ¼ of the remaining stock

    asked by anna on November 12, 2012
  8. Fractions

    A technician has prepared three solutions from a 600 mL stock solution. • In preparing the first solution ½ of the original volume of the stock solution was used. • The second solution required ¼ of the remaining stock

    asked by anna on November 12, 2012
  9. Calc

    You are a lab technician and must create 250 ml of a 17% salt solution. You have available three stock solutions. You have a one liter container of a 5% salt, a 500 ml container of a 28% salt solution, and a 400 ml container of a

    asked by Fatih on February 16, 2012
  10. math

    You are a lab technician and must create 250 ml of a 17% salt solution. You have available three stock solutions. You have a one liter container of a 5% salt, a 500 ml container of a 28% salt solution, and a 400 ml container of a

    asked by Fatih on February 15, 2012

More Similar Questions