Physics

A transformer consists of 275 primary windings and 834 secondary windings. If the potential difference across the primary coil is 25 V, (a) What is the voltage across the secondary coil? (b) what is the effective load resistance of the secondary coil if it is connected across a 125 ohm resistor.

Ok I got part (a) as being 75.82 V...but I am totally confused on part b I don't know what it is asking for or any equation that would work for it! Help please!

  1. 👍
  2. 👎
  3. 👁

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics i need help

    A student is comparing a step-up transformer with a step-down transformer. Which data should she collect from each device? the ratio of incoming and outgoing currents the ratio of incoming and outgoing voltages the ratio of the

  2. Physics

    Which of the following is correct for a step-down transformer? Number of turns in the primary coil is less than the number of turns in the secondary coil. Step-down transformer increases the voltage from low value to high value.

  3. Science

    Examine the scenario. 1)Two different objects are brought close to one another. The objects pull, or attract, each other. Which choice correctly identifies the pole(s) that could be interacting? The poles must be the same, either

  4. Physics

    A step down transformer operates a 2400 volt lines and supplies a current of 60A.The turn ratio of the transformer is 1:24.calculate the secondary voltage, the primary current and the power output, if the transformer is 100%

  1. math

    A 300 kVA transformer has a primary winding resistance of 0.4 Ω and a secondary winding resistance of 0.0015 Ω. The iron loss is 2 kW and the primary and secondary voltages are 4 kV and 200 V respectively. If the power factor of

  2. Physics

    A step-up transformer used on a 120 V line has 95 turns on the primary and 2850 turns on the secondary. What is the emf across the secondary? A. 30 V B. 1800 V C. 2400 V D. 3600 V

  3. Circuits 2

    V1 has rms voltage of Vrms=10V. The turn ratio of the primary to secondary side of the transformer is 1:10. If R1 has a value of 20Ω, what is the value of the rms current on the secondary side? what is the value of the rms

  4. Biology 10A

    what is one difference between primary and secondary succession?

  1. Physics

    A transformer is to be used to provide power for a computer disk drive that needs 5.8 V (rms) instead of the 120 V (rms) from the wall outlet. The number of turns in the primary is 414, and it delivers 500 mA (the secondary

  2. physics- magnetism

    A step-up transformer used in a car has a potential difference of 10 V across the primary coil with 12 turns. What is the current in the secondary coil of resistance 2.5 Ω if the number of turns in the secondary coil is 54 turns?

  3. physics

    Find the turn ratio in a transformer which deliver a voltage of 120volts in the secondary coil form a primary voltage at 60v. Please someone should help me with this

  4. Physics

    a transformer with 600 turns in the primary coil is connected to a 120v AC source. If the transformer is to have (3) separate secondary coils that need to give a) 2.5v, b) 6.0v, and c) 450v, then how many turns should each coil

You can view more similar questions or ask a new question.