THEORY OF MACHINE

The principal stresses at a certain point in a strained material are 150 MPa and 48 Mpa both tensile. Find normal and tangential stresses on a plane inclined at 20 degree with the major principal plane.

  1. 0
  2. 0
asked by rajesh jain
  1. You will find the equations you need at
    http://en.wikipedia.org/wiki/Mohr's_circle

    posted by drwls

Respond to this Question

First Name

Your Response

Similar Questions

  1. Solid machanics

    At a point in a strained material the principal stresses are 60MPa and 40MPa. Find the position of the plane across which the resultant stress is most inclined to the normal and determine the value
  2. solid mechanics

    At a point in a strained material the principal stresses are 60MPa and 40Mpa. Find the position of the plane across which the resultant stress is most inclined to the normal and determine the value of this stress. (Ans:50degree45'
  3. B-Tech mechanical

    At a point in a strained material the principal stresses are 60MPa and 40MPa. Find the position of the plane across which the resultant stress is most inclined to the normal and determine the value of this stress.
  4. solid mechanics

    at a point in a strained material the principal stresses are 60MPa and 40MPa.find the position of the plane across which the resultant stress is most inclined to the normal and determine the value of this stress.
  5. solid mechanics

    A steel plate is subjected to tensile stresses of 200MPa and 150 MPa at right angles to each other. Determine the normal and tangential stresses on a plane inclined at 60 to the 200 MPa stress. Also find the plane on which the
  6. solid mechanics

    A piece of material subjected to three mutually perpendicular stresses of 70, 56 and 84 Mpa. If E = 200GPa, Poisson's ratio = 0.28, determine (10) (a) Principal strains (b) Shear modules (c) Bulk modules.
  7. sakre school

    A piece of material subjected to three mutually perpendicular stresses of 70, 56 and 84 Mpa. If E = 200GPa, Poisson's ratio = 0.28, determine (10) (a) Principal strains (b) Shear modules (c) Bulk modules.
  8. soild

    A piece of material subjected to three mutually perpendicular stresses of 70, 56 and 84 MPa. If E= 200 Gpa, Poissions ratio= 0.28 Determine 1) Principal strains 2) Shear modulus 3) Bulk modulus.
  9. THEORY OF MACHINE

    A piece of material subjected to three mutually perpendicular stresses of 70, 56 and 84 MPa. If E= 200 Gpa, Poissions ratio= 0.28 Determine 1) Principal strains 2) Shear modulus 3) Bulk modulus.
  10. SOLID MECHANICS

    A piece of material subjected to three mutually perpendicular stresses of 70, 56 and 84 MPa. If E= 200 Gpa, Poissions ratio= 0.28 Determine 1) Principal strains 2) Shear modulus 3) Bulk modulus

More Similar Questions