# Chemistry

Lead has a melting point of 327ºC, its specific heat is J/g•deg, and its molar enthalpy of fusion is 4.80 kJ/mol. How much heat, in kilojoules, will be required to heat a 500.0-g sample of lead from 23.0ºC to its melting point and then melt it?

1. 👍
2. 👎
3. 👁
1. q1 = heat to raise T from 23.0C to 327 C.
q1 = mass Pb x specific heat Pb x (Tfinal-Tinitial)

q2 = heat to melt Pb
q2 = mass Pb x heat fusion.

Total = q1 + q2
I note you have mass in grams in specific heat (not listed) in J/g*C so that's ok. However, when you go to the melting stage, you have mass in grams and heat fusion in kJ/mol. I would change heat fusion to J/g*C. When you finish adding q1 and q2 the answer will be in joules, convet that to kJ.

1. 👍
2. 👎
2. 31760J=31.76KJ

1. 👍
2. 👎

## Similar Questions

1. ### Same substances?

Question: Two substances, A and B, have the same melting point. how can you determine if they are the same without using any form of spectroscopy? Explain in detail. My answer: Perform a mixture melting point. In this procedure,

2. ### science

A 15.0 gram lead ball at 25.0°C was heated with 40.5 joules of heat. Given the specific heat of lead is 0.128 J/g∙°C, what is the final temperature of the lead?

3. ### Chemisty

LEAD IS A SOFT, DENSE METAL WITH A SPECIFIC HEAT OF 0.028KCAL/KGC, A MELTING POINT OF 328.0C, AND A HEAT FUSION OF5.5KCAL/KG. HOW MUCH HEAT MUST BE PROVIDED TO MELT A 250.0KG SAMPLE OF LEAD WITH A TEMPERATURE OF 20.0C?

4. ### Physics

How much energy is needed to melt 0.225 kg of lead so that it can be used to make a lead sinker for fishing? The sample has an initial temperature of 27.3 degrees celsius and is poured in the mold immediately after it has melted.

1. ### Physics

A 0.003 0-kg lead bullet is traveling at a speed of 240 m/s when it embeds in a block of ice at 0°C. If all the heat generated goes into melting ice, what quantity of ice is melted? (Lf = 80 kcal/kg, the specific heat of lead =

2. ### Chemistry

The molar enthalpy of combustion of glucose is -2803 kJ. A mass of 1.000 g glucose is combusted in a bomb calorimeter. If the calorimeter contains 875 g H2O and the bomb has a heat capacity of 457 J/C, what is the temperature

3. ### Physics

The melting point of a solid is 90.0 degrees C. What is the heat required to change 2.5 of this solid at 40.0 degrees C to a liquid? The specific heat of the solid is 390 J/kg (K) and its heat of fusion is 4000 J/kg. A. 4.9 10^4 J

4. ### chemistry

How much heat is absorbed by 100 g of ice at -20 deg C to become water at 0 deg C? The specific heat of ice is 2.06 J/gC.

1. ### Chemistry

55 kJ of heat are added to 200 kg of a metal at 28.00◦C and the temperature rises to 29.18◦C. What was the metal? 1. tungsten (speciﬁc heat = 0.134 J/g · ◦ C) 2. copper (speciﬁc heat = 0.385 J/g · ◦ C) 3. silver

2. ### Chemistry

The specific heat of solid gold is 0.13 J/g • °C. How much heat is needed to raise the temperature of 25.0 g of gold from 23°C to its melting point at 1063°C?

3. ### College Physics

100 grams of molten lead (600oC) is used to make musket balls. If the lead shot is allowed to cool to room temperature (21oC), what is the change in entropy (in J/K) of the lead? (For the specific heat of molten and solid lead use

4. ### physical mod

What mass (in grams) of steam at 100°C must be mixed with 462 g of ice at its melting point, in a thermally insulated container, to produce liquid water at 40.0°C? The specific heat of water is 4186 J/kg·K. The latent heat of