physics

if a wire of length 12cm it stress up to 25m what will be the final resistance .it initial resistance is 16ohm?

  1. 👍
  2. 👎
  3. 👁
  1. umm i will help you just go to google look up the question

    1. 👍
    2. 👎

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    Consider two copper wires with the same cross-sectional area. Wire A is twice as long as wire B. How do the resistivities and resistances of the two wires compare? CHECK ALL THAT APPLY Wire A and wire B have the same resistance.

  2. Calculus

    A wire 60 cm long is to be cut into two pieces. One of the pieces will be bent into the shape of a square and the other into the shape of an equilateral triangle, as shown in the diagram below: a diagram showing a 60 cm wire cut

  3. Physics!! Help!!!!!

    A wire of length L and cross-sectional area A has resistance R. What will be the resistance R_stretched of the wire if it is stretched to twice its original length? Assume that the density and resistivity of the material do not

  4. Physics

    1. A force of 40N at the end of a wire of length 4m and diameter 2mm process and extension of 0.24mm. Calculate; (a) stress on the wire (b) strain in the wire (c) Young's Modulous for the material of the wire (π=3.14)

  1. physics

    A force of 40N is applied at the end of a wire 4m long and produces an extension of 0.24mm. If the diameter of the wire is 2.00mm calculate the stress on the wire and strain in the wire. With full workings please

  2. Physics

    A wire of 5.0m and diameter 2.0mm,extends by 0.25mm when a force of 50N was stretch it from it's end calculate a.the stress on the wire. b.the strain in the wire. c.the young's modulus of elasticity of the wire

  3. MINIMIZATION PROBLEM (CALC)

    A wire 9 meters long is cut into two pieces. One piece is bent into a square for a frame for a stained glass ornament, while the other piece is bent into a circle for a TV antenna. To reduce storage space, where should the wire be

  4. Physics

    A wire of length 5.0 m and diameter 2.0 mm extends by 0.25 mm when a force of 50 N was used to stretch it from its end. Calculate the (a)stress on the wire (b)strain in the wire

  1. Physics

    Two wires with the same resistance have the same diameter but different lengths. If wire 1 has length L1 and wire 2 has length L2, how do L1 and L2 compare if wire 1 is made from copper and wire 2 is made from aluminum? The

  2. physics

    A force of 40N is applied at the end of a wire 4m long and it produces an extension of 0.24mm.if the diameter of the wire is 2.0mm.calculate the stress and strain of the wire

  3. AP Physics

    A certain length of wire has a resistance of 21 ohms. This wire is melted down and from the same volume of material a new wire is formed that is three times longer than the original wire. What is the resistance of a new wire?

  4. Physics

    Which one of the following stresses would be most likely to cause a bone to fracture? A) tensile stress B) compressive stress C) sheer stress D) bulk stress

You can view more similar questions or ask a new question.