Physics(Please help)


A uniform horizontal beam is attached to a vertical wall by a frictionless hinge and supported from below at an angle è = 38o by a brace that is attached to a pin. The beam has a weight of 347 N. Three additional forces keep the beam in equilibrium. The brace applies a force P to the right end of the beam that is directed upward at the angle with respect to the horizontal. The hinge applies a force to the left end of the beam that has a horizontal component H and a vertical component V. Find the magnitudes of these three forces.



I am not sure how to start this. Thank you for the help.

asked by Hannah

Respond to this Question

First Name

Your Response

Similar Questions

  1. Phsyics(Please respond)

    A uniform horizontal beam is attached to a vertical wall by a frictionless hinge and supported from below at an angle è = 38o by a brace that is attached to a pin. The beam has a weight of 347 N. Three additional forces keep the
  2. physics

    The drawing shows a uniform horizontal beam attached to a vertical wall by a frictionless hinge and supported from below at an angle θ = 38o by a brace that is attached to a pin. The beam has a weight of 346 N. Three
  3. Physics(Please, please check)

    A uniform horizontal beam is attached to a vertical wall by a frictionless hinge and supported from below at an angle è = 38o by a brace that is attached to a pin. The beam has a weight of 347 N. Three additional forces keep the
  4. physics

    A 9.0 m uniform beam is hinged to a vertical wall and held horizontally by a 5.0 m cable attached to the wall 4.0 m above the hinge, as shown below. The metal of the cable has test strength of 1.00 KN (kilo-Newton), which is the
  5. Physics

    A uniform horiztonal beam is attached to a veritcal wall by a frictionless hinge and supported from below at an angle theta = 39 degrees by a brace that is attached to a pin. The bean has a weight of 340 N. Three additional forces
  6. physics

    A uniform, horizontal beam is 5.00m long and has a weight of 200N. The beam is hinged at one end to a wall. A 600N weight is attached to the order end of the beam. The beam is supported by cable at the end opposite the wall. The
  7. physics

    In Fig. 12-51, uniform beams A and B are attached to a wall with hinges and loosely bolted together. Beam A has length LA = 2.55 m and mass 49.0 kg; beam B has mass 69.0 kg. The two hinge points are separated by distance d = 1.86
  8. physics help

    A 1210 N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1820 N crate hangs from the far end of the beam. The angle between the beam and the horizontal is 30 degrees
  9. physics help

    A 1210 N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1820 N crate hangs from the far end of the beam. The angle between the beam and the horizontal is 30 degrees
  10. physics

    a uniform beam with a weight of 51.3 N and a length of 3.23 m is hinged at its lower end, and a horizontal force Upper F Overscript right-arrow EndScripts of magnitude 64.0 N acts at its upper end. The beam is held vertical by a

More Similar Questions