Questions LLC
Login
or
Sign Up
Ask a New Question
Physics
Mechanics
Force and Motion
A pulley with diameter D = 27in weighs 80 lb. It is mounted on a diameter d = 2-in axle. A weight of 1000 lb is to be lifted. If the coefficient of friction f = 0.1, what vertical pull force P will be needed?
1 answer
nothing
You can
ask a new question
or
answer this question
.
Similar Questions
two pulley rotate at 150 rpm and 300 rpm. the diameter of the larger pulley 15cm if the pulley are connected by belt . what is
Top answer:
Since the distance covered by the belt depends on the circumference of the circles , ...
Read more.
A pulley whose diameter is 9 inches is connected by a belt to another pulley whose diameter is 6 inches. If the larger pulley
Top answer:
Since 9*2 = 6*3, the big pully turns 2 times while the small pulley turns 3 times So, 3/2 * 1200 =
Read more.
a pulley revolving at 250 revolutions per minute has a diameter of 8 inches. it is belted to a second pulley which revolves at
Top answer:
If they are belted, the velocity should be the same. Diameter * pi = Circumference Circumference *
Read more.
how to solve one pulley is 7 cm larger in diameter than a second pulley. the larger pulley turns at 80 rpm, and the smaller
Top answer:
let the diameter of the small pulley be d let the diameter of the larger pulley be d+7 belt distance
Read more.
The two blocks in the figure below, m1 = 1.2 kg and m2 = 4.8, are connected by a massless rope that passes over a pulley. The
Top answer:
To find the time it takes for the 4.8 kg block to reach the floor from a height of 1.0 m, we can
Read more.
On Block has a mass M=500 g, the other has mass m=460 g, they are hooked to a string and is on a pulley will one mass on either
Top answer:
You have distance, time, intial velocity, compute acceleration. d=1/2 at^2 2j) Tension=
Read more.
A pulley revolving at 200 revolutions per minute has a diameter of 15 inches. It is belted to a second pulley which revolves at
Top answer:
total number of inches/min of belt must match, so 200*pi*15 = 150*pi*d d = 200/150 * 15 = 20
Read more.
A 3.00 kg stone is tied to a thin, light wire wrapped around the outer edge of the uniform 8.00 kg cylindrical pulley. The inner
Top answer:
The inner radius I assume means that the axle does not spin. Therefore your moment of inertia has a
Read more.
You have a pulley 13.9 cm in diameter and with a mass of 1.7 kg. You get to wondering whether the pulley is uniform. That is, is
Top answer:
To determine whether the mass of the pulley is evenly distributed or concentrated towards the center
Read more.
The pulley in the jib of a crane has a diameter of 56cm. Find:
a) The circumference of the pulley b) The number of revolutions
Top answer:
C = pi * d so, the turns is 44/C where C is in meters
Read more.
Related Questions
the normal acceleration of a particle on the rim of a pulley 10 ft in diameter is constant @ 8000 ft/s^2. determine the speed of
Find the diameter of a pulley which is driven at 360 rpm by a belt moving at 40 ft/s.
Then in 1 s the pulley turns through an
1. Determine the effort required to lift a load of 100 N using:
(a) Using a single fixed pulley (b) A single movable pulley (c)
find the radius of a pulley if rotating the pulley 108.03 degrees raises the pulley 37.3mm
Two pullies are connected by a belt, Pulley A has a radius of 3 cm and pulley B has a radius of 6cm. As Pulley A rotates, a drop
A pulley with a diameter of 24 inches is driven by a belt which is moving 1045 ft/min. How many revolutions per minute are made
A mechanic wants to use a compound pulley to lift a go-kart from the ground to work table, a distance of 1.2 meters. Without the
A pulley having a diameter of 36 cm is turned by a belt that moves at the rate of 5m/sec . How many revolutions does the pulley
Use the picture below to respond to the question.
The following image depicts two types of pulleys. The pulley on the left is a
Question:
Two masses 2.2 Kg and 3.2 Kg connected by a rope over a massless and frictionless pulley hang at 1.8 m above the ground