chemistry

If 10.00 g of water are introduced into an evacuated flask of volume 2.500 L at 65 degreed celcius, calculate the mass of water vaporized. (Hint: Assume that the volume of the remaining liquid water is negligible; the vapor pressure of water at 65 degrees celsius is 187.5 mmHg.)

  1. 👍 0
  2. 👎 0
  3. 👁 377
  1. you know pressure, volume, and temp. Solve for moles of water vapor.

    PV=nRT

    convert n to grams of H2O

    1. 👍 0
    2. 👎 0
    👨‍🏫
    bobpursley
  2. n = (pv)/ (RT)
    = (187.5 * 2.50) / (62.4 * 338) = 0.0222 mol H20

    0.0222 mol H20 * 18.02g/mol = 0.4 g H20 vaporized

    1. 👍 0
    2. 👎 0

Respond to this Question

First Name

Your Response

Similar Questions

  1. chem

    At 668K 1 mol each of CO and Cl2 are introduced into an evacuated 1.75 L flask. At equilibrium, the total pressure of the gaseous mixture is 32.4 atm. Calculate Kp. How to solve this ? Co+Cl2CoCl2

  2. chemistry

    A 0.03 mol sample of NH4NO3(s) is placed in a 1 L evacuated flask, which is then sealed and heated. The NH4NO3(s) decomposes completely according to the balanced equation above. The total pressure in the flask measured at 400 K is

  3. Science

    Why does the design of the vacuum flask minimize heat transfer by conduction? A)One flask is smaller than the other flask. B)One flask is more reflective than the other flask. C)There is no air between the two flask. D)The two

  4. chemistry

    A chemist dissolves 0.097 g of CuSO4 · 5 H2O in water and dilutes the solution to the mark in a 500-mL volumetric flask. A 13.6-mL sample of this solution is then transferred to a second 500-mL volumetric flask and diluted. What

  1. Chem

    a 4.369g sample of metal is placed in a flask. water is added to the flask and the total volume in the flask is read to be 126.4ml. the mass of the water, flask, and metal is 268.5g. if the mass of the flask is 139.3g and the

  2. Please Help Fast

    A student placed 10.5g of glucose (C6H12O6) in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100.- mL mark on the neck of the flask was reached. The

  3. Chemistry

    A chemist dissolves 0.096 g of CuSO4 · 5 H2O in water and dilutes the solution to the mark in a 500-mL volumetric flask. A 10.8-mL sample of this solution is then transferred to a second 500-mL volumetric flask and diluted. What

  4. Chemistry

    A student placed 12.0g of glucose (C6H1206) in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100.-ml mark on the neck of the flask was reached. The

  1. Advance Chemistry

    A series of measurements are made in order to determine the molar mass of an unknown gas. First, a large flask is evacuated and found to weigh 134.567 g. It is then filled with the gas to a pressure of 735 torr at 31°C and

  2. Chemistry

    mass of empty flask with stopper = 32.634 g mass of flask with water and stopper = 59.479 g density of the water = 0.9973 g/cm^3 mass of water = 26.845 g volume of water = 26.918 cm^3 the flask is then emptied and an unknown

  3. chemistry

    The problem: Nitrogen can react with steam to form ammonia and nitrogen monoxide gas. A 20.0L sample of nitrogen at 173C and 772mmHg is made to react with an excess of steam. The products are collected at room temperature (25C)

  4. Chemistry

    Can you check my answers? Thanks!!!! What would happen to the volume-to-temperature ratio if: 1. One student failed to replenish the boiling water in the boiling-water bath as the flask was being heated. At the end of the 6 min of

You can view more similar questions or ask a new question.