Questions LLC
Login
or
Sign Up
Ask a New Question
Physics
Mechanics
Forces
Pulling up on a rope, you lift a 4.05 kg bucket of water from a well with an acceleration of 2.50 m/s^2.
1-What is the tension in the rope?
1 answer
tension=mass*(acceleration + g)
You can
ask a new question
or
answer this question
.
Related Questions
Water is pulled up from a well in a bucket on a rope the winds on a cylindrical drum 15cm in diameter it takes 28turns of the
A simple wheel and axle is used to lift a bucket of water from a well the radii of the wheel and axle are 20cm and 4cm
Water is taken from a well 11m deep in a bucket,the rope winding up to a drum 35cm in diameter.
A)Through what angle does the
A man on a wharf is pulling in a boat by means of a rope attached to the bow of the boat 1 meter above water level and passing
A rope can withstand a maximum tension force of 500N before breaking. If we use the rope to pull a 24 kg bucket of water from a
How do I solve this
A man pulling a bag of sugar with a means of rope inclined at angle 60 degree to the horizontal if the
Pulling up on a rope, you lift a 4.35-kg bucket of water from a well with an acceleration of 1.78m/s^2. What is the tension in
Part (a) of the drawing shows a bucket of water suspended from the pulley of a well; the tension in the rope is 55.2 N. Part (b)
A bucket that weighs 3.2 pounds and a rope of negligible weight are used to draw water from a well that is 82 feet deep. The
A bucket of mass 1.80kg is whirled in a vertical circle of radius 1.55m . At the lowest point of its motion the tension in the
