
posted by bobpursley
Respond to this Question
Similar Questions

physics
n alloy of copper and gold displaces 1.935 cm^3 of water. It has a mass of 33.44g. If gold has a density of 19.3g/cm^3 and copper has a density of 8.9g/cm^3, what is the percent of gold by mass in the objec 
physics
The British Sovereign coin is an alloy of gold and copper having a total mass of 7.988 g and is 22karat gold. (a) Find the mass of gold in kg using that # of karats = 24 x (mass of gold)/(total mass). (b) Calculate the volumes of 
physics
a piece of gold aluminuim alloy weighs 100g in air and 80g in water.what is the weight of the gold in the alloy if the relative density of gold is 19.3 and that of aluminium is 2.5 
Algebra/Math
Can you show work por favor? :) A metalworker has a metal alloy that is 20% copper and another alloy that is 60% copper. How many kilograms of each alloy should be combined to create 80 kg of a 53% copper alloy? 
chemistry
Follow the steps provided in the simulation to add water to the graduated cylinder, select one of the three samples (copper, silver, or gold), set its mass to the values given in the statements below, find its volume, and 
chem
An experimental alloy contained by copper and tantalum. 3.7950 g of the alloy was dissolved and analyzed gravimetrically. The copper was precipitated and weighed as CuO, a mass of 0.1805 g was obtained. Calculate the %w/w Cu in 
Algebra
solve linear equationan alloy of metal is 25% copper. Another alloy is 50% copper. how much of each alloy should be used to make 1000 grams of an alloy that is 45% copper 
maths
In 60 ounces of alloy for watch cases there are 20 ounces of gold.how much copper must be added to the alloy so that a watch case weighing 4 ounces,made from the new alloy,will contain 1 ounce of gold.......answer is 20 ounces 
Geometry
An alloy of copper is 10% copper and weighs 25 pounds. A second alloy is 18% copper. How much (to the nearest tenth lb.) of the second alloy must be added to the first alloy to get a 13% mixture. 
math
An alloy of copper is 10% copper and weighs 25 pounds. A second alloy is 18% copper. How much (to the nearest tenth lb.) of the second alloy must be added to the first alloy to get a 13% mixture.