physics

A .5 m long, 3 cm diameter metal bar has a Young’s Modulus of 7.0x1010 N/m2. If a 50,000 N force is applied to the end of the bar, by how much will it compress?

  1. 👍 0
  2. 👎 0
  3. 👁 179
asked by Kate

Respond to this Question

First Name

Your Response

Similar Questions

  1. solid mechanics

    A round bar 40 mm diameter was found to be 0.000775 mm. Find the Poisson's ratio and Young's Modulus for the material of the bar. Take value of shear modulus as 40 kN/mm square.

    asked by ripon on August 13, 2013
  2. physics

    A light rigid bar is suspended horizontally from two vertical wires, one of steel and one of brass. Each wire is 2.00m long. The diameter of the steel wire is 0.60mm and the length of the bar AB is 0.20m. When a mass of 10.0kg is

    asked by Edwin on March 27, 2010
  3. physics

    A light rigid bar is suspended horizontally from two vertical wires, one of steel and one of brass. Each wire is 2.00m long. The diameter of the steel wire is 0.60mm and the length of the bar AB is 0.20m. When a mass of 10.0kg is

    asked by Edwin on March 28, 2010
  4. physics

    a metal wire 1.0 mm in diameter and 2.0 m long hangs vertically with a 5.0 kg mass suspended from it. if the wire stretches 1.2 mm under the tension, what is the value of the young's modulus for metal?

    asked by pat on January 10, 2011
  5. mechanical properties of materials

    A cylindrical steel bar is required to support a load of 650 N. the required bar must be 0.17 m in length and must not deform by more than 0.015 mm. given that the Young's modulus of steel is 210 GPa, calculate the minumum

    asked by dmkp on January 28, 2013
  6. mechanical properties of materials

    A cylindrical steel bar is required to support a load of 650 N. the required bar must be 0.17 m in length and must not deform by more than 0.015 mm. given that the Young's modulus of steel is 210 GPa, calculate the minumum

    asked by dmkp on January 28, 2013
  7. Physics

    The bar in the figure has constant cross sectional area A. The top half of the bar is made of material "1" with mass density ρ1, and Young’s modulus E1. The bottom half of the bar is made of material "2" with density ρ2 and

    asked by AK on May 5, 2013
  8. Physics

    The bar in the figure has constant cross sectional area A. The top half of the bar is made of material "1" with mass density ρ1, and Young’s modulus E1. The bottom half of the bar is made of material "2" with density ρ2 and

    asked by HELP NOW on May 5, 2013
  9. chemistry

    The Young’s modulus for steel is 20.7*1010 N/m2. How much will a 2.5 mm diameter wire 12 cm long, be strained when it supports a load of 450 N? Aluminum’s Young’s modulus is 6.9*1010 N/m2. Express the strain as a decimal,

    asked by Anonymous on April 26, 2013
  10. Material Sciences

    The molar crosslink density of a rubber is measured to be 468mol/m3 for a temperature T=300K. What is the Young's modulus of the rubber in MPa? What happens to the modulus of the rubber when the temperature is increased? Young's

    asked by qwerty on September 28, 2014

More Similar Questions