If the back of the truck is 1.5 {\rm m} above the ground and the ramp is inclined at 24{\rm ^{\circ}}, how much time do the workers have to get to the piano before it reaches the bottom of the ramp?

  1. 👍 0
  2. 👎 0
  3. 👁 198
  1. It depends on the friction on the ramp.

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    20.) A piano has been pushed to the top of the ramp at the back of a moving van. The workers think it is safe, but as they walk away, it begins to roll down the ramp. If the back of the truck is 1.5 above the ground and the ramp

    asked by Anonymous on March 9, 2012
  2. Physics

    15. A refrigerator weighing 1500 N is to be lifted onto a truck bed that is 1.0 m above the ground. When pushed up a slanting ramp 2.0 m in length a force parallel to the ramp of only 800 N is required to move it at constant

    asked by Anonymous on July 8, 2014
  3. applied physics

    the work required to lift eleven 94.0lb bags of cement from the ground to the back of a truck is 4340ft lb. what is the distance from the ground to the bed of the truck?

    asked by donna on April 22, 2013
  4. physics

    Truck brakes can fail if they get too hot. In some mountainous areas, ramps of loose gravel are constructed to stop runaway trucks that have lost their brakes. The combination of a slight upward slope and a large coefficient of

    asked by amy on October 31, 2009
  1. physics

    In Fig, a runaway truck with failed brakes is moving downgrade at 160 km/h just before the driver steers the truck up a frictionless emergency escape ramp with an inclination of è = 11°. The truck's mass is 1.5 x 104 kg. (a)

    asked by sweety on March 21, 2009
  2. physics

    A 1.9 kg block slides down a frictionless ramp, as shown in figure 8-28. The top of the ramp is 1.5 m above the ground; the bottom of the ramp is .25 m above the ground. The block leaves the ramp moving horizontally, and lands a

    asked by tony on October 20, 2010
  3. Physics

    A skateboarder shoots off a ramp with a velocity of 6.7 m/s, directed at an angle of 53° above the horizontal. The end of the ramp is 1.0 m above the ground. Let the x axis be parallel to the ground, the +y direction be

    asked by Sam on October 5, 2011
  4. Physics

    A physics student uses a ramp to slide a 350 kg piano onto the back of a pickup truck. The box on the back of the truck is 81 cm above the ground and the planks are 3 m long. An average force of 1500 N is required to slide the

    asked by Hanna on April 11, 2019
  1. Physics

    A box of mass 1.50 kg is given an initial velocity of 12.5 m/s up an inclined ramp that makes an angle of 25.0o with the ground, which is horizontal. The coefficient of kinetic friction between the box and the ramp is 0.240. How

    asked by Tyler on May 13, 2014
  2. physics

    I am having great difficulty with this question. A block is placed on a frictionless ramp at a height of 12.5 m above the ground. Starting from rest, the block slides down the ramp. At the bottom of the ramp, the block slides onto

    asked by Johnny on October 2, 2014
  3. Pre-Calc

    Alexa is weighing a construction barrel up a ramp 4 feet long into the back of a truck. The barrel weighs 120 pounds and the ramp is 45 degrees from the horizontal. How much work is Alexa doing?

    asked by Ken on October 9, 2019
  4. Physics - Inclined Motions

    You are pushing a 53kg crate at a constant velocity up a ramp onto a truck. The ramp makes an angle of 22deg with the horizontal. If your applied force is 373N, what is then coefficient of friction between the crate and the ramp?

    asked by Shaila on August 11, 2010

You can view more similar questions or ask a new question.