Density
 👍 0
 👎 0
 👁 603

 👍 1
 👎 0

 👍 0
 👎 0
Respond to this Question
Similar Questions

calculus
A long rectangular sheet of metal, 12 inches wide, is to be made into a rain gutter by turning up two sides so that they are perpendicular to the sheet. How many inches should be turned up to give the gutter its greatest capacity?
asked by MEG on November 15, 2010 
math
6cm diameter discs are cut from a sheet 130cm long and 70cm wide.(a)How many discs can be cut in this way (b) what area of the sheet is wasted? (My working so far). Area of rectangle=L*B 130*70=9100cm^2 area of circle=22/7
asked by james on April 30, 2015 
Math
The strength S of a rectangular beam varies jointly as its width w and the square of its thickness t. If a wood beam 3 inches wide and 5 inches thick supports 300 pounds, how much can a similar beam 3 inches wide and 8 inches
asked by Carla on November 25, 2011 
Math
When Albert flips open his mathematics textbook, he notices that the product of the page numbers of the two facing pages is 156. Which equation could be used to find the page numbers that Albert is looking at? a. x+(x+1)=156
asked by Angie on March 28, 2009

Mathematics
A container is 24m long ,9m wide and 8m high .how many books can it hold if each book is 20cm long and 6cm thick
asked by Anonymous on May 6, 2020 
Math
A boy is mowing a rectangular lawn 40ft long and 30ft wide. He has cut all of it except for a rectangle that is 20ft long and 15ft wide. What fractional part of the lawn remains uncut? I need helping figuring out how to solve
asked by Jess on November 13, 2016 
math
A steel post is 6 ft. long and 6" thick in diameter. If a cubic foot of steel weighs 490 lb., how much does the rod weigh (to the nearest pound)?
asked by Becky on June 24, 2014 
physics
Comicbook superheroes are sometimes able to punch holes through steel walls. (a) If the ultimate shear strength of steel is taken to be 3.00 x 10^9 Pa, what force is required to punch through a steel plate 1.90 cm thick? Assume
asked by anthony on February 1, 2013

physics
1. A closed magnetic circuit of cast steel contains a 6cm long path of cross sectional area 1cm square and a 2cm part of cross sectional area of 0.5cm square. A coil of 200 turns is wound around the 6cm length of the circuit and a
asked by Joanna on April 18, 2012 
physics
There are four coils of wire being used as electromagnets. They all have the same size and are made up of the same material but have a different number of loops. Which coil will produce a magnetic field with the maximum strength
asked by sophie on April 13, 2009 
chemistry
The density of a certain type of plastic is 0.89 g/cm3. If a sheet of this plastic is 10.0 m long, 1.0 m wide, and 1.0 cm thick, what is its mass?
asked by tas on February 10, 2017 
Math
Ernesto loses 14.5 pounds in 7 months. Now he weighs 156.5 pounds. Which equation can be used to find out how much he weighed before? A. x+14.5=156.5 B. x14.5=156.5 C. 7x+14.5=156.5 D. 7x14.5=156.5 Is the answer B?
asked by Gwen on September 8, 2014
You can view more similar questions or ask a new question.