# physics

A 20 kg crate is placed on a horizontal conveyor belt. The materials are such that μs = 0.6 and μk = 0.3.

(c) What is the maximum acceleration the belt can have without the crate slipping?
(d) If acceleration of the belt exceeds the value determined in part (c), what is the acceleration of the crate?

1. 👍 0
2. 👎 0
3. 👁 1,107
1. Normal force = m g
friction force static = .6 mg
for no slip = m a
.6 m g = m a
a = .6 g or about .6*9.8 = 5.88 m/s^2

F sliding friction = .3 m g = m a
a = .3 g = 2.94 g

1. 👍 0
2. 👎 0
2. thank you!

1. 👍 0
2. 👎 0
3. 2.34m/s^2

1. 👍 0
2. 👎 0
4. THANKS

1. 👍 0
2. 👎 0

## Similar Questions

1. ### geometry

8. A conveyor belt carries supplies from the first floor to the second floor, which is 27 feet higher. The belt makes a 60° angle with the ground. How far do the supplies travel from one end of the conveyor belt to the other?

asked by shellie on February 15, 2013
2. ### Science

container factory uses a 450 W motor to operate a conveyor belt that lifts containers from one floor to another. To lift 250 1-kg containers a vertical distance of 2.4 m, the motor runs for 45 s. What is the efficiency of the

asked by Jack Hill on July 18, 2012
3. ### Physics Force and Friction question

A crate of mass 100kg is at rest on a horizontal floor. The coefficient of static friction between the crate and the floor is 0.4, and the coefficient of kinetic friction is 0.3. A horizontal force, F, or magnitude 350N is applied

asked by Anon on October 16, 2016
4. ### Physics

A horizontal force of 45N applied to a crate of mass 9kg is just sufficient to move it. If the crate is now pulled at an angle of 50° to the horizontal, find the force required to move the crate over the horizontal surface.

asked by Same on June 5, 2020
1. ### physics

A dockworker loading crates on a ship finds that a 20 kg crate, initially at rest on a horizontal surface, requires a 73 N horizontal force to set it in motion. However, after the crate is in motion, a horizontal force of 50 N is

asked by ann on December 7, 2011
2. ### Physics

A 20 kg crate is placed on a horizontal conveyor belt. The materials are such that us = 0.47 and uk = 0.21. What is the maximum acceleration the belt can have without the crate slipping? If acceleration of the belt exceeds the

asked by Leanna on March 3, 2013
3. ### Math

A farmer uses a conveyor belt to move grain from ground level into a storage silo. The conveyor has a length of 9 metres. Its angle of elevation can be adjusted from 5° to 20°. The silo has an opening that can accommodate the

asked by Henry P on May 27, 2012
4. ### Physics

A steel washer is suspended inside an empty shipping crate from a light string attached to the top of the crate. The crate slides down a long ramp that is inclined at an angle of 40 ∘ above the horizontal. The crate has mass 162

asked by Denny on February 9, 2016
1. ### Math

A moving conveyor is built to rise 4 ft for each 5 ft of horizontal change. Suppose the conveyor runs between two floors in a factory. Find the length of the conveyor if the vertical distance between floors is 8 feet. (Round your

asked by Anonymous on August 20, 2018
2. ### Physics

A piece of luggage is being loaded onto an airplane by way of an inclined conveyor belt. The bag, which has a mass of 10.0 kg, travels 6.50 m up the conveyor belt at a constant speed without slipping. If the conveyor belt is

asked by Jenny on July 14, 2013
3. ### math

A package is at rest on a conveyor belt, which is initially at rest. The belt is started and moves to the right for 1.3 s with a constant acceleration of 2 m/s^2 . the belt then moves with a constant deceleration a2 and comes to a

asked by kit on November 20, 2013
4. ### Physics

Dana loads luggage into an airplane using a conveyor belt tilted at an angle of 20°.She places a few pieces of luggage on the belt before it starts to move, then she turns the belt on. It takes the belt 0.70 s to reach its top

asked by CodyJinks on October 27, 2019