English

1. The solar cell could change sunlight directly into electricity.

2. The solar cell could directly change sunlight into electricity.

(Are both the same? Check the position of 'directly' in each xentence, please.)

  1. 👍 0
  2. 👎 0
  3. 👁 116
  1. 1. This is what the writer means to say.

    2. Directly here is misplaced splitting the verb.

    1. 👍 0
    2. 👎 0

Respond to this Question

First Name

Your Response

Similar Questions

  1. Solar Energy Please Help

    Figure 1 shows a simplication of the AM1.5 solar spectrum at 1000W/m2. The spectrum is divided in three spectral ranges: A for 0nm

    asked by Anonymous on October 26, 2013
  2. Solar Energy Please Help

    The figure below presents the EQE of a triple junction solar cell with junctions A, B and C under short circuited (V = 0 V) condition. a) What is the bandgap (in eV) of the absorber layer of the junction A? b) What is the bandgap

    asked by Anonymous on October 26, 2013
  3. Solar Energy

    With respect to a PV module's I-V and P-V curves, and the module's operating point, consider the following statements: a) When the operating point of the PV module is on the MPP (maximum power point), \(P_{mpp} \lt V_{oc} \times

    asked by John on November 23, 2013
  4. Solar Energy please help

    Solar simulators are used to study the performance of solar cells in the lab. In the figure below (left picture), the spectral power density of a solar simulator is shown with the blue line. The spectral power density of this

    asked by UNO on November 29, 2013
  1. Solar Energy Please Help

    a) Family Smith has already installed PV in their house. Now, they also want to cover their needs for warm water with solar energy. For this, they consider having a solar thermal water heating system. Considering that the need for

    asked by Anonymous on October 26, 2013
  2. CIGS AND CDTE FABRICATION

    During manufacturing of a CIGS device, the metal back contact is deposited first, while in case of the CdTe solar cells, the back contact is deposited in the last processing step. What are the configurations of both cells: a) Both

    asked by student on October 10, 2015
  3. Solar energy please help

    1-Consider an organic solar cell consisting of a TiO2 semiconductor with an ionization energy 7.8eV and a polymer with an electron affinity 3.4eV. Which of the followning band diagrams corresponds to the organic solar cell. The

    asked by UNO on November 29, 2013
  4. solar science physics

    On the left-hand side of the figure below a III-V triple junction solar cell is shown. On the right-hand side, the J-V curves of the individual component cells and the multi-junction solar cell are shown. Which junction

    asked by pritam on January 29, 2017
  1. solar energy please help

    In this section, we talked about combining a solar cell with a photoelectrode to form a photoelectrochemical device. Why do we add a solar cell in the system? a)Because the photoelectrode is not able to produce any voltage

    asked by hitesh on November 6, 2013
  2. Physics

    A given solar cell has the following specifications: Isc=4A Voc=0.7V 36 identical cells with the above specifications are to be interconnected to create a PV module. 1- What is the open-circuit voltage (in V) of the PV module if

    asked by youlife2015 on October 24, 2013
  3. Solar Energy Help ASAP

    The current density of an ideal p-n junction under illumination can be described by: J(V)=Jph−J0(eqVkT−1) where Jph is the photo-current density, J0 the saturation-current density, q the elementary charge, V the voltage, k the

    asked by Anonymous on October 17, 2013
  4. Solar Energy Help ASAP

    Let's assume that solar light reaches a silicon solar cell with an angle of incidence of θi=0o. For simplicity, let's consider the refractive index of silicon to be nSi=3.5. The refractive index of air is nair=1. What percentage

    asked by Anonymous on October 17, 2013

You can view more similar questions or ask a new question.