math

the volume of a tank that is 2'- 0'' in diameter and 6'
-0'' long is _ cu ft. ???? please help

  1. 👍 0
  2. 👎 0
  3. 👁 271
  1. V = pi * r^2 * h
    V = 3.14 * 6
    V = ?

  2. 985.96 is this correct

    1. 👍 0
    2. 👎 0
  3. No.

    What do you get when you multiply 3.14 times 6?

  4. 18.84

    1. 👍 0
    2. 👎 0
  5. Right. The volume is 18.84 cubic feet.

Respond to this Question

First Name

Your Response

Similar Questions

  1. CALCULUS

    A cylindrical oil storage tank 12 feet in diameter and 17feet long is lying on its side. Suppose the tank is half full of oil weighing 85 lb per cubic foot. What's the total force on one endof the tank?

    asked by Mishaka on March 12, 2012
  2. CALCULUS

    Water is draining from a small cylindrical tank into a larger one below it. The small cylindrical tank has a radius of 4 feet and a height of 6 feet; the large cylindrical tank has a radius of 8 feet and a height of 16 feet. The

    asked by Anonymous on April 25, 2016
  3. MATHS

    A cylindrical water tank of diameter 1.4m and height 2.1m is being feed by a pipe of diameter 3.5cm through which water follows at the rate of 2m/per second . In how much time the tank will be filled ???

    asked by TUHITUHI on November 24, 2012
  4. math

    two cylindrical tanks have the same height, but the radius of one tank equals the diameter of the other. if the volume of the larger is k% more than the volume of the smaller, k= ? a)50 b)100 c)200 d)300 e)400 small tank volume:

    asked by Christine on June 23, 2005
  1. numerical methods

    Consider a spherical storage tank containing oil. The tank has a diameter of 8 ft. You are asked to calculate the height h to which a dipstick 10 ft long would be wet with oil when immersed in the tank when it contains 6 3 ft of

    asked by aira on April 23, 2015
  2. Physics

    A rigid tank having a volume of 0.100 m3 contains helium gas at 150 atm. How many balloons can be inflated by opening the valve at the top of the tank? Each filled balloon is a sphere 0.300 m in diameter at an absolute pressure of

    asked by Jim on October 4, 2011
  3. solid mensuration

    A cylindrical tank with flat ends has a diameter of two meters and is 5meters long. It is filled with fuel to a depth of one and one-half meters. Find the volume of the fuel in the tank in liters. plsss help!!

    asked by leo on May 13, 2011
  4. Volume

    Water flows into the tank at 8 litres per minute. How long will it take to fill the tank. Volume of tank is 60 litres.

    asked by Urgent help needed on May 13, 2014
  1. math

    9. The polynomial -x^3 -x^2 + 12x represents the volume of a rectangular aquatic tank in cubic feet. The length of the tank is (x + 4). a. How many linear factors should you look for? b. What are the dimensions of the tank? c.

    asked by anonymous on September 2, 2018
  2. solid mensuration

    Find the volume of water in the horizontal tank if it is 7/8 full. Radius of the tank is 600mm. and the lenght of the tank is 5m. If the tank is place in a vertical position, what is the depth of water inside the tank?

    asked by leo on May 12, 2011
  3. math, physics

    A 10 m high, 5 diameter cylindrical water tank has an inlet at the top and a drain at the bottom. The flow rate out of the tank depends on the pressure at the bottom of the tank via the following: dm/dt = (10^-4)*(P_bot) where

    asked by Anonymous on October 6, 2011
  4. MATH WORD PROBLEM HELP PLEASE

    A water tank is in the shape of a right circular cylinder with a height of 20 feet and a volume of 320pi cubic feet. What is the diameter, in feet, of the water tank?

    asked by Anonymous on April 14, 2015

You can view more similar questions or ask a new question.