# physics

At a fabrication plant, a hot metal forging has a mass of 78.5 kg and a specific heat capacity of 426 J/(kg C°). To harden it, the forging is quenched by immersion in 788 kg of oil that has a temperature of 30.3 °C and a specific heat capacity of 2770 J/(kg C°). The final temperature of the oil and forging at thermal equilibrium is 55.4 °C. Assuming that heat flows only between the forging and the oil, determine the initial temperature in degrees Celsius of the forging.

1. 👍 0
2. 👎 0
3. 👁 56

## Similar Questions

1. ### physics

At a fabrication plant, a hot metal forging has a mass of 74 kg and a specific heat capacity of 430 J/(kg·C°). To harden it, the forging is quenched by immersion in 710 kg of oil that has a temperature of 32°C and a specific

asked by Anna on March 13, 2013
2. ### physics

At a fabrication plant, a hot metal forging has a mass of 66.8 kg and a specific heat capacity of 437 J/(kg C°). To harden it, the forging is quenched by immersion in 785 kg of oil that has a temperature of 25.0 °C and a

asked by RC on April 28, 2012
3. ### history

Which describes the science of extracting metals from rocky ore? A metrology B metal forging C metallurgy D metal working Is it C??

asked by corbin on November 6, 2018
4. ### history

Which describes the science of extracting metals from rocky ore? A metrology B metal forging C metallurgy D metal working is it C?

asked by caitlyn on November 6, 2018
5. ### World history

Which describes the science of extracting metals from rocky ore? metrology metallurgy metal forging metal working

asked by Miso on November 2, 2018
6. ### chemistry

In a calorimetry experiment in the lab, you were able to record the following data: Mass of water in a calorimeter = 90.0 g Initial temperature of water in calorimeter = 22.0o C Mass of unknown metal = 45.0 g Initial temperature

asked by James on February 8, 2008
7. ### Chem

Temperature of Bunsen Burner Flame: h t t p s : / / mashchemistry . wikispace s . com /file/ view/Temperature +of+a+ Bunsen+Burner+Flame ... p d f (couldn't put the link so I spaced it out) My data Table: Type of metal used: Cu

asked by Emma on March 1, 2017
8. ### Chemistry

*Please check to see if overall values are put in the right place!* Type of metal used= Copper Mass of metal object= 72.5 g Specific heat of copper= .385 J/g C° Mass of empty styrofoam cup= 3.264 g Mass of styrofoam cup & water=

asked by J.T on May 23, 2017
9. ### linear programming app

write the constraints as linear inequalities and identify all variables used. A canoe requires 8 hours of fabrication and a rowboat 5 hours. The fabrication department has at most 110 hours of labor available each week

asked by ash on April 3, 2011
10. ### chemistry

A disc of wax has several hot metal sampes placed on it. The samples are of diffrent metals. They are all at the same temperature and have the same mass and contact area with the wax. How will the heat capacity of each metal

asked by treasa on May 14, 2014

More Similar Questions