# physic

A copper sheet of thickness 2.01 mm is bonded to a steel sheet of thickness 1.07 mm. The outside surface of the copper sheet is held at a temperature of 100.0°C and the steel sheet at 22.9°C.

a) Determine the temperature (in °C) of the copper-steel interface.

b) How much heat is conducted through 1.00 m2 of the combined sheets per secon

1. 👍
2. 👎
3. 👁
1. WEll, heat flows from the outside of the steel to the outside of the copper.

You need the thermal conductivity coefficents for steel, and copper. I will use Cs, and Cc for those coefficents.

Assume Ti for the temperature of the interface.

And finally, you know the heat moving across the steel is the same as heat moving across the copper.

HeatacrossSteel=HeatacrossCopper
(100-Ti)Cs*.00107=(Ti-22.9)Cc*.00201

solve for Ti check my work.

1. 👍
2. 👎
👤
bobpursley
2. http://www.engineeringtoolbox.com/thermal-conductivity-d_429.html

1. 👍
2. 👎
👤
bobpursley
3. A copper sheet of thickness 2.49 mm is bonded to a steel sheet of thickness 1.51 mm. The outside surface of the copper sheet is held at a temperature of 100.0°C and the steel sheet at 24.1°C.

1. 👍
2. 👎

## Similar Questions

1. ### Statistics

Thickness measurements of ancient prehistoric Native American pot shards discovered in a Hopi village are approximately normally distributed, with a mean of 4.9millimeters (mm) and a standard deviation of 1.5 mm. For a randomly

2. ### Physics

Light that is polarized along the vertical direction is incident on a sheet of polarizing material. Only 94% of the intensity of the light passes through the sheet and strikes a second sheet of polarizing material. No light passes

3. ### Mathematics

the mass of a sheet of metal varies jointly with its area and its thickness a sheet of metal of area 250 cm square and thickness 1 mm has a mass of 200 g find the formula which connect the mass,the area and the thickness

4. ### math

A sheet of paper has dimensions of 8.5 in x 11 in. If you cut 2 in2 from each corner of the sheet, what will the area of the sheet of paper be?

1. ### Maths

Hi im doing measurement at skool at the moment and i cant quite ork out some questions. Can someone please help!! A metal washer has an external diameter of 2cm and an internal diameter of 1cm. A) How many washers can be cut from

2. ### mathematics

The mass of a sheet of metal varies jointly with its area and its thickness.A sheet of metal of area 250 cm square and thickness 1 mm has a mass of 200 g. (a) Find the formula which connects the mass Mg,the area A cm square and

3. ### calculus

Find the dimensions of the largest open-top storage bin with a square base and vertical sides that can be made from 108ft^2 of sheet steel. (Neglect the thickness of the steel and assume that there is no waste)

4. ### Physics

We have an infinite, non-conducting sheet of negligible thickness carrying a uniform surface charge density +σ=7.00e-6 C/m2 and, next to it, an infinite parallel slab of thickness D=17 cm with uniform volume charge density

1. ### physics

Accomplished silver workers in India can pound silver into incredibly thin sheets, as thin as 3.00 x 10-7 m (about one hundredth of the thickness of a sheet of paper). Find the area of such a sheet that can be formed from 3.70 kg

2. ### algebra

^ = exponent **show work please A sheet of 67-pound paper has a thickness of 100^-1 inch. a. write and evaluate an expression for the total thickness of 5 sheets of 67-pound paper b. write and evaluate an expression for the total

3. ### Math

The librarian was checking the thicknesses of several books and found that the average thickness of a book was 1.8 centimeters. She found this by averaging the thickness of five different books. Four of the thicknesses were 1.4cm,

4. ### Algebra 1

I need help pls! 1. A lake near the Artic Circle is covered by a 2-meter thick sheet of ice during the cold winter months. When spring arrives, the warm air gradually melts the ice, causing its thickness to decrease at a constant