# physics

Electrons in a beam incident on a crystal at an angle of 300 have kinetic energies ranging from zero
to a maximum of 5500 eV. The crystal has a grating space d=0.5A0, and the reflected electrons are
passed through a slit .Find the velocities of the electrons passing through the slit. How many are these
velocities?

1. 👍
2. 👎
3. 👁
1. angle is 300 isnt it

1. 👍
2. 👎

## Similar Questions

1. ### Math

A construction crew wants to hoist a heavy beam so that it is standing up straight. They tie a rope to the beam, secure the base, and pull the rope through a pulley to raise one end of the beam from the ground. When the beam makes

2. ### physics

A beam of electrons moving in the x-direction at 8.3Mm/s enters a region where a uniform 240G magnetic field points in the y-direction. The boundary of the field region is perpendicular to the beam. How far into the field region

3. ### science

You know that a collision must be "elastic" if: The momentum of the two-object system doesn't change The sum of the final kinetic energies equals the sum of the initial kinetic energies There is no change in the internal energies

4. ### Physics

A light beam strikes a piece of glass at a 60.00° incident angle. The beam contains two wavelengths, 450.0 nm and 700.1 nm, for which the index of refraction of the glass is 1.4824 and 1.4750, respectively. What is the angle

1. ### Physics

Monochromatic x-rays (λ = 0.166 nm) from a nickel target are incident on a potassium chloride (KCl) crystal surface. The spacing between planes of atoms in KCl is 0.314 nm. At what angle (relative to the surface) should the beam

2. ### Physics

A purple beam is hinged to a wall to hold up a blue sign. The beam has a mass of mb = 6.7 kg and the sign has a mass of ms = 17.4 kg. The length of the beam is L = 2.83 m. The sign is attached at the very end of the beam, but the

3. ### physics

Linearly polarized light is incident on a piece of polarizing material. What is the ratio of the transmitted light intensity to the incident light intensity when the angle between the transmission axis and the incident electric

4. ### Geometry

A construction crew wants to hoist a heavy beam so that it is standing up straight. They tie a rope to the beam, secure the base, and pull the rope through a pulley to raise one end of the beam from the ground. When the beam makes

1. ### Physics! plese help

A 1320-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1960-N crate hangs from the far end of the beam. Using the data shown in the figure, find (a) the magnitude of the