Physics

"A 1220-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1960-N crate hangs from the far end of the beam. Find a) the magnitude of the tension in the cable and b) the magnitude of the horizontal and vertical components of the force that the wall exerts on the left end of the beam. (The cable makes an angle of 50 degrees with respect to the horizontal and the beam makes an angle of 30 degrees.)"

According to my textbook, the answers are a)2260N and b) 1450N for both the horizontal and vertical components. I just really need some help in setting up this problem to get those answers.

  1. 👍
  2. 👎
  3. 👁

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    A uniform 8 m 1500 kg beam is hinged to a wall and supported by a thin cable attached 2 m from the free end of the beam as shown in the figure. The beam is supported at an angle of 30 degrees above the horizontal. a) free diagram

  2. Physics

    A uniform 34.5-kg beam of length = 4.95 m is supported by a vertical rope located d = 1.20 m from its left end as in the figure below. The right end of the beam is supported by a vertical column. a) Find the tension in the rope.

  3. physics

    a 10-m uniform beam of weight 100N is supported by two ropes at the ends. If a 400N erson sits at 2.0 m from the left end of the beam, what is the tension in the right rope?

  4. physics

    A 160kg horizontal beam is supported at each end. A 330kg piano rests a quarter of the way from one end. What is the vertical force on each of the supports?

  1. Physics

    A uniform beam of length 1.0 m and mass 16 kg is attached to a wall by a cable that makes an angle of 30 degrees with the end of the beam, as shown in the figure. The beam is free to pivot at the point where it attaches to the

  2. Physics

    A purple beam is hinged to a wall to hold up a blue sign. The beam has a mass of mb = 6.7 kg and the sign has a mass of ms = 17.4 kg. The length of the beam is L = 2.83 m. The sign is attached at the very end of the beam, but the

  3. Physics! plese help

    A 1320-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1960-N crate hangs from the far end of the beam. Using the data shown in the figure, find (a) the magnitude of the

  4. Physics

    A floodlight with a mass of 20.0 kg is used to illuminate the parking lot in front of a library. The floodlight is supported at the end of a horizontal beam that is hinged to a vertical pole. A cable that makes an angle of 30

  1. physics

    The figure shows a uniform beam of mass m pivoted at its lower end, with a horizontal spring attached between its top end and a vertical wall. The beam makes an angle รจ with the horizontal. (a) Find expression for the distance d

  2. Physics

    A 500N person stands 2.5m from a wall against which a horizontal beam is attached. The beam is 6m long and weighs 200N. A cable is attached to the free end of the beam and makes an angle of 45 to the horizontal and is attached to

  3. physics

    A 189.4 kg uniform, horizontal beam is hinged at one end and at the other is supported by a cable that is at 37 degrees to the vertical. The beam is 3.85 m long. Calculate the magnitude of the force at the hinge.

  4. Physics

    A uniform rod 8m long weighing 5kg is supported horizontally by two vertical parallel strings at P and Q,and at distances of 2m,and 6m from one end. Weights of 1kg,1.5kg and 2kg are attached at distances of 1m, 5m and 7m

You can view more similar questions or ask a new question.