Chemistry

Using Volumetric Glassware to Measure, Dilute,and Titrate Acid Solution

1)For each of the following procedural errors, indicate whether the calculated molarity of the HCl solution would be higher or lower than the actual molarity. Briefly explain.

a)The NaOH titrant is obtained in a wet beaker

b)The volumetric flask is filled to above the calibration mark with water when the original HCl solution is diluted.

c)The buret tip is not filled with titrant when the first titration is begun.

  1. 👍
  2. 👎
  3. 👁
  1. You don't provide enough details to answer the questions.

    1. 👍
    2. 👎

Respond to this Question

First Name

Your Response

Similar Questions

  1. Dilution

    What volume of H2O should be added to 500 ML of a 1.0 mol/L CuSO4 solution to dilute it to 0.5 mol/L? This is what I have so far... H20 + CuSO4 --------> H2SO4 + CuO So you use the formula M1V1 = M2V2 so its (0.500)(1.0) =

  2. Health records

    The American Medical Association developed a set of codes called _______ to standardize claims for services provided. A. Correct Procedural Terminology B. Calculated Procedural Terminology C. Current Procedural Terminology D.

  3. chemistry(Urgent Please help)

    A student is asked to standardize a solution of barium hydroxide. He weighs out 0.945 g potassium hydrogen phthalate (KHC8H4O4, treat this as a monoprotic acid). It requires 33.9 mL of barium hydroxide to reach the endpoint. A.

  4. chemistry

    What is the molarity of a potassium hydroxide solution if 38.65 mL of the KOH solution is required to titrate 25.84 mL of 0.1982 M hydrochloric acid solution?

  1. Chemistry

    Ferrochrome is an alloy of iron and chromium. Ferrochrome can be dissolved in dilute sulfuric acid to produce a mixture of FeSO4 and Cr2(SO4)3. The FeSO4 reacts with K2Cr2O7 in acid solution according to the following equation.

  2. Chem

    I got part a but part b I'm having trouble with I keep getting 56.2mL. I'm not sure what the next step is really to find part b. A. How would you prepare 250 mL of a 0.150 M solution of CoCl2 from solid CoCl2 and distilled water?

  3. Chemistry-please help

    "Use a 10% w/v nitric acid solution." How to prepare 10% w/v nitric acid solution? Do I just weigh 10g of conc nitric acid (65%) and dilute to 100ml with water?

  4. chemistry

    You extract the iron from a tablet and dilute that to 350.0 ml in a volumetric flask. You transfer 0.500 ml of this solution to a 75.0 ml volumetric flask and dilute this to volume. When you measure the concentration of this

  1. chemistry

    Would the following procedural errors result in an incorrectly high or low calculated percent NaOCl in commercial bleach solution? A student failed to allow the volumetric pipet to drain completely when transferring the diluted

  2. science(chem)

    I'm making different concentrations of ethanol and I just wanted to check my calculations and method. Making ethanol concentrations of: 0.40% 0.30% 0.20% 0.10% 0.05% To make the 0.40% ethanol from stock solution using 100ml

  3. Chemistry

    A chemistry student weighs out 0.123 grams of chloroacetic acid (HCH2ClCO2) into a 250. milliliter volumetric flask and dilutes to the mark with distilled water. He plans to titrate the acid with 0.1200 moles/liter NaOH solution.

  4. Chemistry

    chemistry student weighs out 0.123 grams of chloroacetic acid (HCH2ClCO2) into a 250. milliliter volumetric flask and dilutes to the mark with distilled water. He plans to titrate the acid with 0.1200 moles/liter NaOH solution.

You can view more similar questions or ask a new question.