chem

a 13.5L tank is filled with H2 to a pressure of 2x10^2atm. How many balloons (each 2L) can be inflated to a pressure of 1 atm from the tank?assume there is no temp change and tank cant be emptied below 1 atm of pressure

  1. 👍
  2. 👎
  3. 👁
  1. PV = nRT will give you n = number of mols H2 in the tank originally.

    Redo PV = nRT and substitute 1 for P and calcualte n = number of mols at the end (since P can't go below 1 atm).

    Now use PV = nRT to calculate the mols used to fill a single balloon.

    You should be able to determine how many balloons can be filled with the total mols you have.

    Post your work if you get stuck.

    1. 👍
    2. 👎

Respond to this Question

First Name

Your Response

Similar Questions

  1. Social Studies

    1.Which events would be more common in a command economy than a market economy? Select all that apply. A. People with lower incomes have the same goods as people with higher incomes. B. People wait in long lines for cheap goods.

  2. Chemistry

    Imagine that you have a 7.00L gas tank and a 3.50L gas tank. You need to fill one tank with oxygen and the other with acetylene to use in conjunction with your welding torch. If you fill the larger tank with oxygen to a pressure

  3. Chemistry

    Balloon- CO2 Balloon- O2 Balloon- He Balloon- N2 Balloon- CH4 Represented above are five identical balloons, each filled to the same volume at 25 degrees Celcius and 1.0 atmosohere pressure with the pure gases indicated. A) which

  4. Physics

    A clown at a birthday party has brought along a helium cylinder, with which he intends to fill balloons. When full, each balloon contains 0.036 m3 of helium at an absolute pressure of 1.2 x 10^5 Pa. The cylinder contains helium at

  1. chemistry

    Imagine that you have a 5.50 L gas tank and a 3.50 L gas tank. You need to fill one tank with oxygen and the other with acetylene to use in conjunction with your welding torch. If you fill the larger tank with oxygen to a pressure

  2. Chemistry

    A solution of aniline(C6H5NH2, Kb=4.2x10^-10) has a pH of 8.69 at 25 Celsius. What was the initial concentration of aniline? I have so far don't know if it's right: *. [H3O]=10^-8.69=2x10^-9 * 4.2x10^-10=(2x10^-9)^2 / x

  3. physics

    A rectangular storage tank 4m long by 3m wide is filled with paraffin to a depth of 2m given that the density of paraffin is 80kg/m^3,caiculate a)the volume of paraffin b)the weight of paraffin c)the mass of paraffin d)the

  4. Chemistry

    Three balloons filled with three diffferent gaseous compounds each have a volume of 22.4 L at STP. Would these balloons have the same mass or contain the same number of molecules? Explain.

  1. physics

    Calculate the pressure exerted halfway up a 30-ft tank. The liquid level in the tank is 22 ft. Specific gravity is 0.79. Vapor pressure at 100 degrees Fahrenheit equals 12.2 psi. The tank operates at 36 psi.

  2. physics

    A water tank is filled to a depth of 10 m and the tank is 20 m above ground. The water pressure at ground level in a hose 2 cm in diameter is closest to: A) 3.9 × 105 N/m2 B) 2.0 × 104 N/m2 C) 9.2 N/m2 D) The cross-sectional

  3. chemistry

    A 14.5-L tank is filled with H2 to a pressure of 2.00 102 atm. How many balloons (each 2.00 L) can be inflated to a pressure of 1.00 atm from the tank? Assume that there is no temperature change and that the tank cannot be emptied

  4. Chemistry

    A cylinder containing 15.0 L of helium gas at a pressure of 165 atm is to be used to fill party balloons. Each balloon must be filled to a volume of 2.0 L at a pressure of 1.1 atm. What is the maximum number of balloons that can

You can view more similar questions or ask a new question.