A copper wire or length 2.0M, with cross-sectional area 7.1x10^-6 m^2 and youngs modulus of 11x10^10 N/m^2 has a 200 kg load hung on it. what is its increase in length?

F/A=Y* change in L/Length
= (200*9.8)/7.1x10^-6=11x10^10* delta L/2m? am i even setting this equation up right?

1. 👍
2. 👎
3. 👁
1. Yes, you set it up correctly, and the right numbers are there. Just solve for delta L

1. 👍
2. 👎

Similar Questions

1. physics

Consider two copper wires with the same cross-sectional area. Wire A is twice as long as wire B. How do the resistivities and resistances of the two wires compare? CHECK ALL THAT APPLY Wire A and wire B have the same resistance.

2. solid machanics

a material has a youngs modulus of 1.25*105N/mm2 and a poissons ratio of 0.25.calculate the modulus of rigidity and the bulks modulus.

3. Electrical

a conductor having a cross-sectional area of 0.00161 sq.in. carries a current of 4.5amp. calculate the electron velocity, assuming the wire to be (a) copper, (b) aluminum.

4. physics

A 4.0-m-long steel wire has a cross-sectional area of 0.050cm2. Its proportional limit has a value of 0.0016 times its Young's modulus. Its breaking stress has a value of 0.0065 times its Young's modulus. The wire is fastened at

1. physics

If the current in a wire of a CD player is 5.00 mA, how long would it take for 2.00 C of charge to pass through a cross-sectional area of this wire?

2. physics

A 92-kg man's thighbone has a relaxed length of 0.56 m, a cross-sectional area of 6.0 10-4 m2, and a Young's modulus of 1.2 1010 N/m2. By how much does the thighbone compress when the man is standing on both feet? 1 µm

3. physics

How much charge passes through a cross-sectional area of a copper wire in 0.8 s if I = 3.5 A? 1 C

4. math

a conductor having a cross sectional area of 0.00161 sq. in. carries a current of 4.5 amp. Calculate the electron velocity, assuming the wire to be a copper.

1. Physics

The Golden Gate Bridge in San Francisco has a main span of length 1.28 km, one of the longest in the world. Imagine that a steel wire with this length and a cross-sectional area of 4.00 x 10-6 m^2 is laid on the bridge deck with

2. College Physics

A wire P has resistance R. If the wire is stretched and its length is increased by 10%, what would be the percentage change in its resistance? (Assume the density of the wire remains constant) A) - 10% B) 0 % C) 10% D) 20% My

3. Physics

A wire of cross-sectional area 5.00x10^-6 m^2 has a resistance of 1.75 ohm. what is the resistance of a wire of the same material and length as the first wire, but with a cross-sectional area of 8.75x10^-6 m^2? I really want to

4. Physics

A brass wire with Young's modulus of 9.20 1010 Pa is 2.5 m long and has a cross-sectional area of 4.6 mm2. If a weight of 5.2 kN is hung from the wire, by how much does it stretch?