physics

In Fig. 12-51, uniform beams A and B are attached to a wall with hinges and loosely bolted together. Beam A has length LA = 2.55 m and mass 49.0 kg; beam B has mass 69.0 kg. The two hinge points are separated by distance d = 1.86 m. In unit-vector notation, what is the force on (a) beam A due to its hinge, (b) beam A due to the bolt, (c) beam B due to its hinge, and (d) beam B due to the bolt?

  1. 👍
  2. 👎
  3. 👁
  1. phuthy sawal nae andy

    1. 👍
    2. 👎

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    A uniform 8 m 1500 kg beam is hinged to a wall and supported by a thin cable attached 2 m from the free end of the beam as shown in the figure. The beam is supported at an angle of 30 degrees above the horizontal. a) free diagram

  2. physics

    a 10.0m long bar is attached by a frictionless hing to a wall and held horizontally by a rope that makes an angle of 53 deg with the bar the bar is uniform and weights 39.9 N. how far from the hinge should a 10.0kg mass be

  3. Physics! plese help

    A 1320-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1960-N crate hangs from the far end of the beam. Using the data shown in the figure, find (a) the magnitude of the

  4. Physics

    A point charge (m = 1.0 g) at the end of an insulating string of length L = 51 cm (Fig. 16-66) is observed to be in equilibrium in a uniform horizontal electric field of E = 9200 N/C, when the pendulum's position is as shown in

  1. Physics

    A point charge (m = 1.0 g) at the end of an insulating string of length L = 51 cm (Fig. 16-66) is observed to be in equilibrium in a uniform horizontal electric field of E = 9200 N/C, when the pendulum's position is as shown in

  2. Physics

    A uniform beam of length 1.0 m and mass 16 kg is attached to a wall by a cable that makes an angle of 30 degrees with the end of the beam, as shown in the figure. The beam is free to pivot at the point where it attaches to the

  3. Physics 11

    A single wave pulse is sent along a thick rope that's tied to a thin rope, which in turn is attached to a wall. Reflection of the wave will occur at both points A (where the thick rope is attached to the thin rope) & point B

  4. physics

    A 12 N horizontal force pushes a block weighing 5.0 N against a vertical wall (Fig. 6-26).The coefficient of static friction between the wall and the block is 0.60, and the coefficient of kinetic friction is 0.40. Assume that the

  1. physics

    A uniform horizontal beam with a length of 8m and a weight of 200N is attached to a wall by a pin connection. Its far end is supported by a cable that makes an angle of 53° with the beam (Figure below). If a 600N person stands 2m

  2. Physics

    A tennis ball of mass m = 0.060 kg and speed v = 15 m/s strikes a wall at a 45° angle and rebounds with the same speed at 45° (Fig. 7-29). What is the impulse given to the wall? I know the direction is normal and into the wall,

  3. physics

    A 9.0 m uniform beam is hinged to a vertical wall and held horizontally by a 5.0 m cable attached to the wall 4.0 m above the hinge, as shown below. The metal of the cable has test strength of 1.00 KN (kilo-Newton), which is the

  4. science

    A construction worker is using his weight to keep a stationary stack of wooden beams from falling. If the construction worker uses 689.0 N of force to hold 10 beams stationary against a wall, how much work does he do? (1 point) 0

You can view more similar questions or ask a new question.