Questions LLC
Login
or
Sign Up
Ask a New Question
Science
Physics
Most sphygmomanometers use mercury. How tall would the manometer tube need to be if it were filled with water instead? It might need to measure a blood pressure as high as 300 mm Hg.
1 answer
what is 300mm*denstiyHg/denstiywater ?
You can
ask a new question
or
answer this question
.
Related Questions
The organic compound di-n-butyl phthalate, C16H22O4(l), is sometimes used as a low-density (1.046 g·mL–1) manometer fluid.
Elemental mercury was first discovered when a mercury oxide was decomposed with heat, forming mercury metal and oxygen gas. When
A sample of 62.3 CM^3 of argon gas at 18°c was contained at a pressure of 155 kPa in a j-shaped tube with Mercury. Later the
A uniform vertical tube of 40cm is sealed at upper end is lowered into Mercury and length of air column become 35cm calculate
A thread of mercury of length 15cm is used to trap some air in a capillary tube with uniform cross sectional area and closed at
a vessel connected to an open-end mercury manometer is filled with gas to a pressure of .835 atm.the atmospheric pressure is 755
A tube of uniform cross sectional area closed at one end contain some dry air which is sealed by a thread of Mercury 15.5cm
If the levels of mercury are the same in both sides of a u-tube, what must be true of the gas in the manometer
i said: The gases
I'm not sure how to approach this problem. A manometer uses kerosene, specific gravity 0.82 as the fluid. A reading of 5 inches
The atmospheric pressure is 764.7 torr. A gas sample is placed in a flask attached to an open-end mercury manometer. The height
