physics

total normal stresses of 110 and 40 kpa are applied to two planes at right angles in an element of soil. the shear stress acting on those palnes is 20 kpa. what must be the value of the pore pressure in the element if the minor principle stress in the elemnt is to be zero?

  1. 0
  2. 0
  3. 4
asked by nick

Respond to this Question

First Name

Your Response

Similar Questions

  1. soil mechanics

    total normal stresses of 110 and 40 kpa are applied to two planes at right angles in an element of soil. the shear stress acting on those palnes is 20 kpa. what must be the value of the pore pressure in the element if the minor

    asked by nick on September 19, 2010
  2. solid mechanics

    A steel plate is subjected to tensile stresses of 200MPa and 150 MPa at right angles to each other. Determine the normal and tangential stresses on a plane inclined at 60 to the 200 MPa stress. Also find the plane on which the

    asked by navneet kumar on March 3, 2015
  3. Chemistry

    the vapor pressure of ethanol at its normal boiling point would be 1)80 kPa 2)101.2 kPa 3)273 kPa 4)373 kPa would it be 1 ?

    asked by Hannah on February 25, 2011
  4. chem

    Nitrogen(75.5 kPa), oxygen (19.2 kPa), carbon dioxide(0.05 kPa) and water vapor(4.3 kPa) are the usual atmospheric components. What is the total atmospheric pressure in kPa?

    asked by joe on March 30, 2008
  5. math

    An airline with two types of airplanes, P1 and P2, has contracted with a tour group to provide transportation for a minimum of 400 first class, 900 tourist class, and 1500 economy class passengers. For a certain trip, airplane P1

    asked by Mary on July 30, 2018
  6. Math

    Tatum Company has four products in its inventory. Information about the december 31, 2009, inventory is as follows: product total total total Net cost replacement realizable cost Value 101 $120,000 110,000 100,000 102 90,000

    asked by Bobbi Loffredo on March 25, 2011
  7. Chemistry

    (a) What is the distance between second nearest neighbor atoms in vanadium? Express your answer in cm. (b) What is the interplanar spacing between (110) planes in vanadium? Express your answer in cm. (c) At what angle must (110)

    asked by Chemgam on January 11, 2013
  8. Chemistry

    What is the total pressure of a mixture of gases made up of CO2, O2 and H2 if the partial pressures are 22.3 kPa, 44.7 kPa and 112 kPa respectively?

    asked by Anonymous on April 4, 2011
  9. Sociology

    5. What type of sociologist stresses a commitment to positively impacting society through sociology? would it be applied 1)academic 2)applied 3)public 4)scientific

    asked by Susan on July 15, 2012
  10. Material Sciences

    HW9_1: AXIAL AND TRANSVERSE STRAINS - THE POISSON'S RATIO When no loads are applied, the isotropic elastic block depicted below is a cube of side L0=200 mm. When the distributed load (surface traction) q=200 MPa is applied as

    asked by AMK on July 17, 2013

More Similar Questions