# Chemistry

mass of empty flask with stopper = 32.634 g
mass of flask with water and stopper = 59.479 g
density of the water = 0.9973 g/cm^3
mass of water = 26.845 g
volume of water = 26.918 cm^3

mass of flask with new liquid and stopper = 23.531 g
density of liquid = 0.46710 g/cm^3

the flask is emptied again and dried
weight of stoppered flask and its metal contents = 152.047 g
then filled with water and mass = 165.541
mass of metal = 13.494
mass of water = 13.494

Is the mass of metal and water suppose to be the same?
Can anyone tell me the volume of the water?
What is the volume of the metal?
What is the density of the volume?

Can you show the work? Thanks.

1. 👍 0
2. 👎 0
3. 👁 1,384
1. How much of this represents what you have done? That is, are all the numbers supplied by the problem or have you worked to obtain some of them. For example, line 5 gives the volume of the water but third line from bottom asks for the volume of water? Also, I don't understand the last line; i.e., "what is the density of the volume?" That doesn't make sense.

1. 👍 0
2. 👎 0
2. While you're at it, also explain the following:
paragraph 3.

mass of flask with new liquid and stopper = 23.531.
mass of flask and stopper = 32.634 (line 1).
No, the mass of metal is not 13.494 g but the mass of water is. And mass of metal and mass of water MIGHT be the same in some problem but they aren't in this problem. Mass metal in this problem is
fl + stop + metal = 152.047
fl + stop (empty) = 32.634 (line 1)
The difference is the mass metal.

1. 👍 0
2. 👎 0
3. I meant what is the density of the metal. The last question is reffering to the latest problem with water.. not when it was first stated in the beginning of the problem.

1. 👍 0
2. 👎 0
4. I don't know exactly how many problems you have here since you refer in your answer to the latest problem with water. So check this work very carefully for I have assumed this is just one giant problem. I still don't get paragraph 2 where an unknown liquid was added and it weighted LESS than the empty container weighed. How can that be?

Is the mass of metal and water suppose to be the same?

No, the mass of the metal and water is not the same. The mass of the water is 13.494 g. The mass of the metal is the difference between the empty flask and stopper subtracted from the flask and stopper and metal and I get 119.493. Check that.

Can anyone tell me the volume of the water?

The volume of the water is the mass of the water divided by the density of the water. That is 13.494/0.9973 = ??

What is the volume of the metal?

The volume of the metal is the difference between the volume of the flask, stopper, and water (that was 26.918 cc) and the volume of water that was added to fill the flask when it caontained the metal (that is 13.494/0.9973). If I didn't make an error (and it's easy to do with so many numbers) I found 13.530 cc). So then the volume of the metal is the difference of the 26.9 something - the 13.5 something.

What is the density of the volume?

With the mass of the metal and the volume of the metal, density = mass/volume. My rough answer was about 8.9 or so. The metals in the Co, Ni, Cu group (that area) have densities in that range.

1. 👍 0
2. 👎 0

## Similar Questions

1. ### Chem

a 4.369g sample of metal is placed in a flask. water is added to the flask and the total volume in the flask is read to be 126.4ml. the mass of the water, flask, and metal is 268.5g. if the mass of the flask is 139.3g and the

2. ### chemistry

The mass of an empty flsk is 49.74 g. what is the mass of the flask filled with acetone ( d = 0.792 g/mL) if the same flask weighs 75.2 g. when filled with water?

3. ### Science

Why does the design of the vacuum flask minimize heat transfer by conduction? A)One flask is smaller than the other flask. B)One flask is more reflective than the other flask. C)There is no air between the two flask. D)The two

4. ### science

1.)A vacuum flask keeps its contents warmer or cooler than the surrounding environment for a length of time. It consists of two flasks, one inside the other, that connect at the neck. the space between the two flasks is completely

1. ### Chemistry

A student obtained a clean, dry glass- stoppered flask. She weighed the flask and stopper on an analytical balance and found the total mass to be 33.695 g. She then filled the flask with water and obtained a mass for the full

2. ### Physics

A stopper tied to the end of a string is swung in a horizontal circle. If a mass of the stopper is 13.0 g, and the string is 93.0 cm, and the stopper revolves at a constant speed 10 times in 11.8 secs, what is the tension on the

3. ### chemistry

A flask has a mass of 78.23 g when empty and 593.63 g when filled with water. When the same flask is filled with concentrated sulfuric acid, H2SO4, its mass is 1026.57 g. What is the density of concentrated sulfuric acid? (Assume

4. ### General Chemistry

At STP, a 5.00L flask filled with air has a mass of 543.251g. The air in the flask is replaced with another gas and the mass of the flask is 566.107g. The density of air is 1.29g/L. What is the gas that replaced the air?

1. ### SCIENCE

A flask weights 46.8 g when it is empty and 121.6 g when filled with water. When the same flask is filled with another liquid, the mass is 91.2 g. What is the density of the second liquid?

2. ### chemistry

A student obtained a clean, dry, glass stoppered flask. The weight of the flask and stopper was 32.634 g. The student filled the flask with water and obtained a mass for the full stoppered flask of 59.479 g. The density of water

3. ### Chemistry

an empty flask as a mass of 123.4 grams. When the flask is filled with water, the mass is 211.6 grams. If 10.0 grams of zinc (d=7.14 g/cm3) are added to the flask filled with water (and the sides of the flask are dried from the

4. ### chemistry

Calculate the flask filled with stop cock is evacuated and weight its mean is found to be 134.567 it is them filled to a pressure of 735 mm at31c with is of UN non molecular mass and then the flask the filled with water and weight