# chemistry

A stock solution's hypochlorite activity was determined as follows: . -
2.00g of liquid sodium hypochlorite (NaOCl) was weighed into a flask and diluted with 50mL deionized water.10mL of 10% sulfuric acid and 10mL of 10% potasssium iodide were added, followed by titration with 0.1N sodium thiosulfate (Na2S2O3) until colorless.
% sodium hypochlorite
= (mL Na2S2O3)(0.1N)(0.03722)/2.00gNaOCl X 100

[The factor 0.03722 was derived by multiplying molecular weight of NaOCl (74.45g/mol) by 0.001 (mL to L conversion) and dividing by 2(mols of thiosulfate per hypochlorite).]

Please explain why we need to multiply by 0.1N? Thanks.

1. 👍 0
2. 👎 0
3. 👁 152
1. Break it down into steps.
Step 1 is to calculate #mew.
mL x N = number of milliequivalents.

Step 2 convert #mew to grams.
number of milliequivalents x milliequivalent weight = grams.

Step 3 converts grams to percent
(grams/weight sample) x 100 = percent.

1. 👍 0
2. 👎 0
posted by DrBob222

## Similar Questions

1. ### organic chemistry

in a reaction with 9-fluorenol and sodium hypochlorite (with acetic acid) that is supposed to yield 9-fluorenone, what could be a possible reason for error if the solution of 9-fluorenol, sodium hypochlorite, and acetic acid was

asked by Anonymous on February 12, 2009

Titration of a Sample of Household bleaches: The oxidizing agent in a household bleach is determined by placing 100 mL of distilled water in a 250 mL Erlenmeyer flask and adding 10 mL of the 10% (w/w) KI solution, swirling the

asked by Sara on October 22, 2008
3. ### Chemistry

Suppose a student diluted and titrated a bleach unknown exactly as described in the experimental procedure, except only a single titration was performed which required 13.73 mL of 0.100 M Na2S2O3. The density of the original,

asked by Zay on October 28, 2019
4. ### chemistry

If 90 mL of laundry bleach containing a 5.0% w/v concentration of sodium hypochlorite is recommended per load of laundry, what mass of sodium hypochlorite is being used per load?

asked by cody on April 26, 2012
5. ### Chemistry

Hi DrBob, Sorry about that, I wasn't very clear! Can someone please help me complete these calculations for my lab; I am having some trouble. A. Standardization of Na2S2O3 -Mass of KIO3 in 100mL = 0.09600g -Calculate Molarity of

asked by Bryant on March 6, 2011
1. ### CHEMISTRY> HELP QUICK! pls

1. What is the amount of oxalate in 2 mL of 0.035M solution? a) 7 ¡Á 10¨C2 mole b) 1.75 ¡Á 10¨C2 mole c) 7 ¡Á 10¨C5 mole d) 1.75 ¡Á 10¨C5 mole 2. Sodium oxalate may be prepared by titrating oxalic acid (C2H2O4) with

asked by Lucinda on August 28, 2010
2. ### gpc

Calculate the molarity of a bleach solution that is 8% by mass (m/v) or 8g/100mL sodium hypochlorite.

asked by samry on March 3, 2014
3. ### Chemistry

To illustrate the calculation, assume that 21.95 mL of a thiosulfate solution is required to reduce the iodine liberated by 20.85 mL of 0.0200M KIO3 and that 18.63 mL of the same thiosulfate solution reacts with the iodine

asked by Marcus on April 26, 2013
4. ### chemistry........help!! =)

One brand of laundry bleach is an aqueous solution containing 4.00% sodium hypochlorite (NaOCl) by mass What is the molarity of this solution? (Assume a density of 1.02 g/mL .)

asked by Lisa, Help needed! on December 8, 2010
5. ### Chemistry

Solutions of sodium hypochlorite, NaClO are sold as bleach. They are prepared by the following reaction: 2NaOH + Cl2 --> NaCl + NaClO + H2O If you have 2.32 mol of NaOH and 2.74 mol of Cl2 ga available to react, answer the

asked by Sara on May 1, 2015

More Similar Questions