physic

An aluminum rod is 10.0 cm long and a steel rod is 80.0 cm long when both rods are at a temperature of15 degrees cel. Both rods have the same diameter. The rods are joined end-to-end to form a rod 90.0 cm long. The coefficients of linear expansion of aluminum and steel are2.4x10^-5k^-1 and1.2x10^-5k^-1 respectively. The temperature is raised to90degrees cel. The increase in the length of the joined rod, in mm,

asked by Paul
  1. --

    posted by Help

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    A stairwell is supported by two circular steel rods at one end. The other end supported above. The two steel rods are subjected to a total load of 12,800lbs. The rods are 24 ft long and E=30*10^6 psi. Select the rod based on the
  2. physics

    A stairwell is supported by two circular steel rods at one end. The other end supported above. The two steel rods are subjected to a total load of 12,800lbs. The rods are 24 ft long and E=30*10^6 psi. Select the rod based on the
  3. physics

    A stairwell is supported by two circular steel rods at one end. The other end supported above. The two steel rods are subjected to a total load of 12,800lbs. The rods are 24 ft long and E=30*10^6 psi. Select the rod based on the
  4. physics

    A stairwell is supported by two circular steel rods at one end. The other end supported above. The two steel rods are subjected to a total load of 12,800lbs. The rods are 24 ft long and E=30*10^6 psi. Select the rod based on the
  5. physics

    A stairwell is supported by two circular steel rods at one end. The other end supported above. The two steel rods are subjected to a total load of 12,800lbs. The rods are 24 ft long and E=30*10^6 psi. Select the rod based on the
  6. science

    A stairwell is supported by two circular steel rods at one end. The other end supported above. The two steel rods are subjected to a total load of 12,800lbs. The rods are 24 ft long and E=30*10^6 psi. Select the rod based on the
  7. physics

    A 1.0-m thin rod of aluminum is laid end-to-end with a 1.0-m thin rod of steel. The rods are initially at 25 oC. What is the total length of both rods when heated to 450 oC?
  8. PHYSICS

    Two metal rods -- one copper the other aluminum -- are connected in series, as shown in the figure below. Note that each rod is 0.525 m in length, and has a square cross section 1.25 cm on a side. The temperature at the copper end
  9. physics

    The ends of the two rods shown in the figure are separated by 2.97 mm at 24.3 °C. The left-hand rod is brass and 1.21 m long; the right-hand rod is steel and 1.21 m long. Assuming that the outside ends of both rods rest firmly
  10. physics

    The ends of the two rods shown in the figure are separated by 2.97 mm at 24.3 °C. The left-hand rod is brass and 1.21 m long; the right-hand rod is steel and 1.21 m long. Assuming that the outside ends of both rods rest firmly

More Similar Questions