physics

WHAT CONDITIONS ARE NECESSARY FOR A HEAT ENGINE TO HAVE AN EFFICIENCY OF 1.0? AND HOW DO THE TEMP OF COMBUSTION AND THE TEMP. OF COOLANT AND EXHAUST AFFECT THE EFFICIENCY OF AUTOMOBILE ENGIES?

  1. 👍 0
  2. 👎 0
  3. 👁 243

Respond to this Question

First Name

Your Response

Similar Questions

  1. physics

    an engine pumps of 100 kg of water through a height of 10m in 5 second. Given that the efficiency of engine is 60%. If g=10m/s^2 the power of engine is

  2. Science

    A reversible heat engine operates with an efficiency of 50%. If during each cycle it rejects 150 cal to a reservoir of heat at 30°C, then what is the temperature of the other reservoir and how much work does it carry out per

  3. Physics

    In each cycle of its operation, a heat engine expels 2400 J of energy and performs 1800 J of mechanical work. (a) How much thermal energy must be added to the engine in each cycle? (b) Find the thermal efficiency of the engine.

  4. Physics

    You design an engine that takes in 1.5 x 10^4 J of heat at 650 K in each cycle and rejects heat at a temperature of 350 K. The engine completes 240 cycles in 1 minute. What is the theoretical maximum power output of your engine?

  1. Physics

    A heat engine exhausts 3 000 J of heat while performing 1 500 J of useful work. What is the efficiency of the engine?

  2. physics

    If a gasoline engine has an efficiency of 21 percent and loses 780 J to the cooling system and exhaust during each cycle, how much work is done by the engine? Is it 3709.5??? Chemical energy in (as fuel and oxygen) = Work out +

  3. physics

    A Carnot engine is operated between two heat reservoirs at temperatures 520 K and 300 K. (a) If the engine receives 6.45 kJ of heat energy from the reservoir at 520 K in each cycle, how many joules per cycle does it reject to the

  4. physics......PLEASE HELP!!

    A steam engine absorbs 1.98*10^5 J and expels 1.49*10^5 J in each cycle. Assume that all of the remaining energy is used to do work. a. What is the engine's efficiency? b. How much work is done in each cycle? If a gasoline engine

  1. physics

    A heat engine receives 7.0 x 10^3 J of heat and loses 3.0 x 10^3 J in each cycle. What is the efficiency? 1-30% 2-43% 3-57% 4-70% 5-100%

  2. physics

    The engine of a large ship does 2.05 multiplied by 108 J of work with an efficiency of 4.00%. (a) How much waste heat (J) is produced? (b) How many barrels of fuel are consumed, if each barrel produces 6.00 multiplied by 109 J of

  3. physics.

    Heat engine X takes four times more energy by heat from the hot reservoir than heat engine Y. Engine X delivers two times more work, and it reject seven times more energy by heat to the cold reservoir than heat engine Y. Find the

  4. PHYSICS - PLEASE HELP

    Converting sunlight to electricity with solar cells has an efficiency of 15%. It's possible to achieve a higher efficiency (though currently at higher cost) by using concentrated sunlight as the hot reservoir of a heat engine.

You can view more similar questions or ask a new question.